Re: initrd-xxx.img create dracut not correct

[Harald Hoyer <harald-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>]

Am 10.03.2013 10:29, schrieb yeyouqun:
> ÓÚ 2013-3-8 15:02, Harald Hoyer дµÀ:
>> Am 08.03.2013 05:11, schrieb yeyouqun:
>>> Recently I upgraded linux kernel to 3.6.10 and upgrade dracut version to 024,
>>> system starts up OK on 3.6.10. But when I upgraded kernel from 3.6.10 to 3.8.2,
>>> dracut failed to start up the system. Message when start up reads:
>>>
>>> ......
>>>     dracut: dracut-dracut-024-
>>>      rpcbind: cannot create socket for udp6
>>>      rpcbind: cannot create socket for tcp6
>>>      mount: unknoun filesys
>>>      udev: starting version 147
>>>      systend-udevd (139): /proc/139/oom_adj is deprecated, please use
>>>      /proc/139/oom_score_adj instead.
>>>      dracut Warning: Could not boot.
>>>      dracut Warning: Could not boot.
>>>      Dropping to debug shell.
>>>      /bin/sh: can't access tty; job control turned off
>>> ......
>>>
>>> But when I unpack the initrd-3.8.2.img, the /lib/modules directory shows as
>>> below:
>>>
>>> modules ---- 3.8.2
>>>           |
>>>           |__ 3.6.10
>>>
>>> all the kernel modules reside in "3.6.10" directory and other files, such as
>>> "modules.dep" and etc. reside in 3.8.2, I think this is the reason why system
>>> can't start up.
>>>
>>> I upgraded kernel by the steps as(in kernel source tree of 3.8.2):
>>>
>>>      make
>>>      make modules_install
>>>      make install
>>>
>>> Any one can tell how to fix this behavior of dracut?
>> What's the output of:
> output is two big, I appende it.
>>
>> # dracut --debug test.img 3.8.2
> 

/usr/lib/dracut/dracut-functions.sh@1377(dracut_kernel_post): xargs -r modprobe
-a -d / --ignore-install --show-depends --set-version 3.8.2
/usr/lib/dracut/dracut-functions.sh@1382(dracut_kernel_post): [[ insmod = insmod ]]
/usr/lib/dracut/dracut-functions.sh@1383(dracut_kernel_post): echo
///lib/modules/3.6.10/kernel/arch/x86/crypto/crc32c-intel.ko


This looks fishy...


What is the output of:

# modprobe -a --ignore-install --show-depends --set-version 3.8.2 xor