Re: failed to bring up bonding interface (dracut+system)

[Harald Hoyer <harald@redhat.com>]

On 24.05.2014 09:02, Vasiliy Tolstov wrote:
> Hello.
> I'm using dracut to create initramfs and systemd.
> Dracut configures bond and all works fine, but then it shutdowns and
> switch rooti, mac address of slave interfaces (eth0 and eth1) changed,
> but bonding mac saves the same. After that bond interface not works.
> How to prevent this fail?
> If i rmmod igb driver and load it mac addresses change to normal and
> all works fine.
> dracut from current master, system - 212.
> 
> my /proc/cmdline
> bond=bond0:eth0,eth1:mode=balance-xor,miimon=100,updelay=200,downdelay=200
> net.ifnames=0 ip=bond0:auto6:9000 rd.bootif=0 rd.md=0 rd.dm=0 rd.lvm=0
> rd.luks=0 console=tty0 console=ttyS1,115200 rw
> root=live:http://[2001:db8:0:f101:92e2:baff:fe31:44c]/image/mh-vm/image.squashfs
> rd.live.size=1G
> chef=http://[2001:db8:0:f101:92e2:baff:fe31:44c]/chef/vm09 rd.shell
> raid=noautodetect rdshell rd.debug rdnetdebug
> 
> Invalid mac addresses is
> ba:ee:69:7c:ed:4e
> 4a:0f:e8:44:93:35
> Valid mac addreses is
> 00:25:90:d5:bf:bc
> 00:25:90:d5:bf:bd
> 
> 

?? something in your real root system assigning MAC adresses to the interfaces?

which distribution?