* failed to bring up bonding interface (dracut+system)
@ 2014-05-24 7:02 Vasiliy Tolstov
2014-05-28 11:57 ` Harald Hoyer
0 siblings, 1 reply; 4+ messages in thread
From: Vasiliy Tolstov @ 2014-05-24 7:02 UTC (permalink / raw)
To: systemd-devel, initramfs
Hello.
I'm using dracut to create initramfs and systemd.
Dracut configures bond and all works fine, but then it shutdowns and
switch rooti, mac address of slave interfaces (eth0 and eth1) changed,
but bonding mac saves the same. After that bond interface not works.
How to prevent this fail?
If i rmmod igb driver and load it mac addresses change to normal and
all works fine.
dracut from current master, system - 212.
my /proc/cmdline
bond=bond0:eth0,eth1:mode=balance-xor,miimon=100,updelay=200,downdelay=200
net.ifnames=0 ip=bond0:auto6:9000 rd.bootif=0 rd.md=0 rd.dm=0 rd.lvm=0
rd.luks=0 console=tty0 console=ttyS1,115200 rw
root=live:http://[2001:db8:0:f101:92e2:baff:fe31:44c]/image/mh-vm/image.squashfs
rd.live.size=1G
chef=http://[2001:db8:0:f101:92e2:baff:fe31:44c]/chef/vm09 rd.shell
raid=noautodetect rdshell rd.debug rdnetdebug
Invalid mac addresses is
ba:ee:69:7c:ed:4e
4a:0f:e8:44:93:35
Valid mac addreses is
00:25:90:d5:bf:bc
00:25:90:d5:bf:bd
--
Vasiliy Tolstov,
e-mail: v.tolstov@selfip.ru
jabber: vase@selfip.ru
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: failed to bring up bonding interface (dracut+system)
2014-05-24 7:02 failed to bring up bonding interface (dracut+system) Vasiliy Tolstov
@ 2014-05-28 11:57 ` Harald Hoyer
2014-05-28 12:18 ` Vasiliy Tolstov
[not found] ` <5385CF3A.1040306-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
0 siblings, 2 replies; 4+ messages in thread
From: Harald Hoyer @ 2014-05-28 11:57 UTC (permalink / raw)
To: Vasiliy Tolstov, systemd-devel, initramfs
On 24.05.2014 09:02, Vasiliy Tolstov wrote:
> Hello.
> I'm using dracut to create initramfs and systemd.
> Dracut configures bond and all works fine, but then it shutdowns and
> switch rooti, mac address of slave interfaces (eth0 and eth1) changed,
> but bonding mac saves the same. After that bond interface not works.
> How to prevent this fail?
> If i rmmod igb driver and load it mac addresses change to normal and
> all works fine.
> dracut from current master, system - 212.
>
> my /proc/cmdline
> bond=bond0:eth0,eth1:mode=balance-xor,miimon=100,updelay=200,downdelay=200
> net.ifnames=0 ip=bond0:auto6:9000 rd.bootif=0 rd.md=0 rd.dm=0 rd.lvm=0
> rd.luks=0 console=tty0 console=ttyS1,115200 rw
> root=live:http://[2001:db8:0:f101:92e2:baff:fe31:44c]/image/mh-vm/image.squashfs
> rd.live.size=1G
> chef=http://[2001:db8:0:f101:92e2:baff:fe31:44c]/chef/vm09 rd.shell
> raid=noautodetect rdshell rd.debug rdnetdebug
>
> Invalid mac addresses is
> ba:ee:69:7c:ed:4e
> 4a:0f:e8:44:93:35
> Valid mac addreses is
> 00:25:90:d5:bf:bc
> 00:25:90:d5:bf:bd
>
>
?? something in your real root system assigning MAC adresses to the interfaces?
which distribution?
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-05-28 12:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-24 7:02 failed to bring up bonding interface (dracut+system) Vasiliy Tolstov
2014-05-28 11:57 ` Harald Hoyer
2014-05-28 12:18 ` Vasiliy Tolstov
[not found] ` <5385CF3A.1040306-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-05-28 12:20 ` Vasiliy Tolstov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox