From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 2/2] drm/i915: implement hsw_write_infoframe
Date: Mon, 14 May 2012 17:12:51 -0300 [thread overview]
Message-ID: <1337026371-4119-2-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1337026371-4119-1-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Both the control and data registers are completely different now.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 4 +++
drivers/gpu/drm/i915/intel_hdmi.c | 53 +++++++++++++++++++++++++++++++++----
2 files changed, 52 insertions(+), 5 deletions(-)
V2: swap patches 1 and 2
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index eae9495..5024551 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1703,6 +1703,7 @@
/* Video Data Island Packet control */
#define VIDEO_DIP_DATA 0x61178
#define VIDEO_DIP_CTL 0x61170
+/* Pre HSW: */
#define VIDEO_DIP_ENABLE (1 << 31)
#define VIDEO_DIP_PORT_B (1 << 29)
#define VIDEO_DIP_PORT_C (2 << 29)
@@ -1719,6 +1720,9 @@
#define VIDEO_DIP_FREQ_VSYNC (1 << 16)
#define VIDEO_DIP_FREQ_2VSYNC (2 << 16)
#define VIDEO_DIP_FREQ_MASK (3 << 16)
+/* HSW and later: */
+#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12)
+#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)
/* Panel power sequencing */
#define PP_STATUS 0x61200
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index cd5d9a9..2ead3bf 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -89,6 +89,32 @@ static u32 g4x_infoframe_enable(struct dip_infoframe *frame)
}
}
+static u32 hsw_infoframe_enable(struct dip_infoframe *frame)
+{
+ switch (frame->type) {
+ case DIP_TYPE_AVI:
+ return VIDEO_DIP_ENABLE_AVI_HSW;
+ case DIP_TYPE_SPD:
+ return VIDEO_DIP_ENABLE_SPD_HSW;
+ default:
+ DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
+ return 0;
+ }
+}
+
+static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum pipe pipe)
+{
+ switch (frame->type) {
+ case DIP_TYPE_AVI:
+ return HSW_TVIDEO_DIP_AVI_DATA(pipe);
+ case DIP_TYPE_SPD:
+ return HSW_TVIDEO_DIP_SPD_DATA(pipe);
+ default:
+ DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
+ return 0;
+ }
+}
+
static void g4x_write_infoframe(struct drm_encoder *encoder,
struct dip_infoframe *frame)
{
@@ -251,13 +277,30 @@ static void vlv_write_infoframe(struct drm_encoder *encoder,
static void hsw_write_infoframe(struct drm_encoder *encoder,
struct dip_infoframe *frame)
{
- /* Not implemented yet, so avoid doing anything at all.
- * This is the placeholder for Paulo Zanoni's infoframe writing patch
- */
- DRM_DEBUG_DRIVER("Attempting to write infoframe on Haswell, this is not implemented yet.\n");
+ uint32_t *data = (uint32_t *)frame;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+ u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
+ u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->pipe);
+ unsigned int i, len = DIP_HEADER_SIZE + frame->len;
+ u32 val = I915_READ(ctl_reg);
- return;
+ if (data_reg == 0)
+ return;
+
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+ val &= ~hsw_infoframe_enable(frame);
+ I915_WRITE(ctl_reg, val);
+
+ for (i = 0; i < len; i += 4) {
+ I915_WRITE(data_reg + i, *data);
+ data++;
+ }
+ val |= hsw_infoframe_enable(frame);
+ I915_WRITE(ctl_reg, val);
}
static void intel_set_infoframe(struct drm_encoder *encoder,
--
1.7.9.5
next prev parent reply other threads:[~2012-05-14 20:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-14 20:12 [PATCH 1/2] drm/i915: small hdmi coding style cleanups Paulo Zanoni
2012-05-14 20:12 ` Paulo Zanoni [this message]
2012-05-14 21:38 ` [PATCH 2/2] drm/i915: implement hsw_write_infoframe Eugeni Dodonov
2012-05-20 15:54 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337026371-4119-2-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox