public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 1/4] drm/i915: disable RCBP and VDS unit clock gating on IVB and VLV
Date: Fri, 25 May 2012 12:32:37 -0700	[thread overview]
Message-ID: <1337974360-14224-1-git-send-email-jbarnes@virtuousgeek.org> (raw)

The RCBP workaround still applies on these chips, and we need VDS as well.

v2: remove MB boot fetch that snuck in (Daniel)
    add workaround tags to comments for easier internal tracking (Daniel)

References: https://bugs.freedesktop.org/show_bug.cgi?id=50251
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_reg.h |    1 +
 drivers/gpu/drm/i915/intel_pm.c |   55 +++++++++++++++++++++++++++++++-------
 2 files changed, 46 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0f45a18..e479e1a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3989,6 +3989,7 @@
 # define GEN6_CSUNIT_CLOCK_GATE_DISABLE			(1 << 7)
 
 #define GEN6_UCGCTL2				0x9404
+# define GEN7_VDSUNIT_CLOCK_GATE_DISABLE		(1 << 30)
 # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE		(1 << 13)
 # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE		(1 << 12)
 # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1 << 11)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index fe04be6..934e436 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3366,11 +3366,6 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(WM2_LP_ILK, 0);
 	I915_WRITE(WM1_LP_ILK, 0);
 
-	/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
-	 * This implements the WaDisableRCZUnitClockGating workaround.
-	 */
-	I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
-
 	I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
 
 	I915_WRITE(IVB_CHICKEN3,
@@ -3387,6 +3382,28 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
 			GEN7_WA_L3_CHICKEN_MODE);
 
+	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+	 * gating disable must be set.  Failure to set it results in
+	 * flickering pixels due to Z write ordering failures after
+	 * some amount of runtime in the Mesa "fire" demo, and Unigine
+	 * Sanctuary and Tropics, and apparently anything else with
+	 * alpha test or pixel discard.
+	 *
+	 * According to the spec, bit 11 (RCCUNIT) must also be set,
+	 * but we didn't debug actual testcases to find it out.
+	 *
+	 * According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+	 * This implements the WaDisableRCZUnitClockGating workaround.
+	 *
+	 * Also apply WaDisableVDSUnitClockGating and
+	 * WaDisableRCPBUnitClockGating.
+	 */
+	I915_WRITE(GEN6_UCGCTL2,
+		   GEN7_VDSUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCZUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
 	/* This is required by WaCatErrorRejectionIssue */
 	I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
 			I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
@@ -3418,11 +3435,6 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(WM2_LP_ILK, 0);
 	I915_WRITE(WM1_LP_ILK, 0);
 
-	/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
-	 * This implements the WaDisableRCZUnitClockGating workaround.
-	 */
-	I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
-
 	I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
 
 	I915_WRITE(IVB_CHICKEN3,
@@ -3442,6 +3454,29 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
 		   I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
 		   GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
 
+
+	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+	 * gating disable must be set.  Failure to set it results in
+	 * flickering pixels due to Z write ordering failures after
+	 * some amount of runtime in the Mesa "fire" demo, and Unigine
+	 * Sanctuary and Tropics, and apparently anything else with
+	 * alpha test or pixel discard.
+	 *
+	 * According to the spec, bit 11 (RCCUNIT) must also be set,
+	 * but we didn't debug actual testcases to find it out.
+	 *
+	 * According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+	 * This implements the WaDisableRCZUnitClockGating workaround.
+	 *
+	 * Also apply WaDisableVDSUnitClockGating and
+	 * WaDisableRCPBUnitClockGating.
+	 */
+	I915_WRITE(GEN6_UCGCTL2,
+		   GEN7_VDSUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCZUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
 	for_each_pipe(pipe) {
 		I915_WRITE(DSPCNTR(pipe),
 			   I915_READ(DSPCNTR(pipe)) |
-- 
1.7.5.4

             reply	other threads:[~2012-05-25 19:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-25 19:32 Jesse Barnes [this message]
2012-05-25 19:32 ` [PATCH 2/4] drm/i915: load boot context at driver init time Jesse Barnes
2012-05-25 19:32 ` [PATCH 3/4] drm/i915: add TDL unit clock gating disable for IVB and VLV Jesse Barnes
2012-05-25 19:32 ` [PATCH 4/4] drm/i915: add L3 bank clock gating disable on " Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1337974360-14224-1-git-send-email-jbarnes@virtuousgeek.org \
    --to=jbarnes@virtuousgeek.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox