From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 19/43] drm/i915: simplify possible_clones computation
Date: Tue, 3 Jul 2012 11:28:11 +0200 [thread overview]
Message-ID: <1341307715-3886-20-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1341307715-3886-1-git-send-email-daniel.vetter@ffwll.ch>
Intel hw only has one MUX for encoders, so outputs are not cloneable
or all in the same group of cloneable outputs. This neatly simplifies
the code and allows us to ditch some ugly if cascades in the dp and
hdmi init code (well, we need these if cascades for other stuff still,
but that can be taken care of in follow-up patches).
Also explain why sdvo LVDS outputs can be cloned. Native LVDS (and
also eDP) can't be cloned, because the panel fitter is before the
ouput MUX (and for cpu eDP cloning isn't possible, anyway).
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/intel_crt.c | 4 +--
drivers/gpu/drm/i915/intel_display.c | 18 +++++++++++----
drivers/gpu/drm/i915/intel_dp.c | 14 ++---------
drivers/gpu/drm/i915/intel_drv.h | 25 ++++-----------------
drivers/gpu/drm/i915/intel_dvo.c | 39 +++++++++++++++++++++++++++------
drivers/gpu/drm/i915/intel_hdmi.c | 10 +-------
drivers/gpu/drm/i915/intel_lvds.c | 2 +-
drivers/gpu/drm/i915/intel_sdvo.c | 14 ++++++------
drivers/gpu/drm/i915/intel_tv.c | 2 +-
9 files changed, 65 insertions(+), 63 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9525822..c3f6680 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -690,9 +690,7 @@ void intel_crt_init(struct drm_device *dev)
intel_connector_attach_encoder(intel_connector, &crt->base);
crt->base.type = INTEL_OUTPUT_ANALOG;
- crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
- 1 << INTEL_ANALOG_CLONE_BIT |
- 1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ crt->base.cloneable = true;
if (IS_HASWELL(dev))
crt->base.crtc_mask = (1 << 0);
else
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 62acf98..11e1b10 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6678,15 +6678,23 @@ int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
return 0;
}
-static int intel_encoder_clones(struct drm_device *dev, int type_mask)
+static int intel_encoder_clones(struct intel_encoder *encoder)
{
- struct intel_encoder *encoder;
+ struct drm_device *dev = encoder->base.dev;
+ struct intel_encoder *source_encoder;
int index_mask = 0;
int entry = 0;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
- if (type_mask & encoder->clone_mask)
+ list_for_each_entry(source_encoder,
+ &dev->mode_config.encoder_list, base.head) {
+
+ if (encoder == source_encoder)
index_mask |= (1 << entry);
+
+ /* Intel hw has only one MUX where enocoders could be cloned. */
+ if (encoder->cloneable && source_encoder->cloneable)
+ index_mask |= (1 << entry);
+
entry++;
}
@@ -6845,7 +6853,7 @@ static void intel_setup_outputs(struct drm_device *dev)
list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
encoder->base.possible_crtcs = encoder->crtc_mask;
encoder->base.possible_clones =
- intel_encoder_clones(dev, encoder->clone_mask);
+ intel_encoder_clones(encoder);
}
/* disable all the possible outputs/crtcs before entering KMS mode */
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b8abbff..b7db872 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2479,18 +2479,10 @@ intel_dp_init(struct drm_device *dev, int output_reg)
connector->polled = DRM_CONNECTOR_POLL_HPD;
- if (output_reg == DP_B || output_reg == PCH_DP_B)
- intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
- else if (output_reg == DP_C || output_reg == PCH_DP_C)
- intel_encoder->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
- else if (output_reg == DP_D || output_reg == PCH_DP_D)
- intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+ intel_encoder->cloneable = false;
- if (is_edp(intel_dp)) {
- intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
- INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
- ironlake_panel_vdd_work);
- }
+ INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
+ ironlake_panel_vdd_work);
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 40f50c2..53a8b8d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -89,25 +89,6 @@
#define INTEL_OUTPUT_DISPLAYPORT 7
#define INTEL_OUTPUT_EDP 8
-/* Intel Pipe Clone Bit */
-#define INTEL_HDMIB_CLONE_BIT 1
-#define INTEL_HDMIC_CLONE_BIT 2
-#define INTEL_HDMID_CLONE_BIT 3
-#define INTEL_HDMIE_CLONE_BIT 4
-#define INTEL_HDMIF_CLONE_BIT 5
-#define INTEL_SDVO_NON_TV_CLONE_BIT 6
-#define INTEL_SDVO_TV_CLONE_BIT 7
-#define INTEL_SDVO_LVDS_CLONE_BIT 8
-#define INTEL_ANALOG_CLONE_BIT 9
-#define INTEL_TV_CLONE_BIT 10
-#define INTEL_DP_B_CLONE_BIT 11
-#define INTEL_DP_C_CLONE_BIT 12
-#define INTEL_DP_D_CLONE_BIT 13
-#define INTEL_LVDS_CLONE_BIT 14
-#define INTEL_DVO_TMDS_CLONE_BIT 15
-#define INTEL_DVO_LVDS_CLONE_BIT 16
-#define INTEL_EDP_CLONE_BIT 17
-
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
@@ -153,11 +134,15 @@ struct intel_encoder {
int type;
bool needs_tv_clock;
bool connectors_active;
+ /*
+ * Intel hw has only one MUX where encoders could be clone, hence a
+ * simple flag is enough to compute the possible_clones mask.
+ */
+ bool cloneable;
void (*hot_plug)(struct intel_encoder *);
void (*enable)(struct intel_encoder *);
void (*disable)(struct intel_encoder *);
int crtc_mask;
- int clone_mask;
};
struct intel_connector {
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index d72584a..86a3d2b 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -97,6 +97,30 @@ static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
struct intel_dvo, base);
}
+static void intel_disable_dvo(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);
+ u32 dvo_reg = intel_dvo->dev.dvo_reg;
+ u32 temp = I915_READ(dvo_reg);
+
+ intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
+ I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
+ I915_READ(dvo_reg);
+}
+
+static void intel_enable_dvo(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);
+ u32 dvo_reg = intel_dvo->dev.dvo_reg;
+ u32 temp = I915_READ(dvo_reg);
+
+ I915_WRITE(dvo_reg, temp | DVO_ENABLE);
+ I915_READ(dvo_reg);
+ intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
+}
+
static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
@@ -269,9 +293,10 @@ static void intel_dvo_destroy(struct drm_connector *connector)
static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
.dpms = intel_dvo_dpms,
.mode_fixup = intel_dvo_mode_fixup,
- .prepare = intel_encoder_prepare,
+ .prepare = intel_encoder_noop,
.mode_set = intel_dvo_mode_set,
- .commit = intel_encoder_commit,
+ .commit = intel_encoder_noop,
+ .disable = intel_encoder_disable,
};
static const struct drm_connector_funcs intel_dvo_connector_funcs = {
@@ -364,6 +389,9 @@ void intel_dvo_init(struct drm_device *dev)
drm_encoder_init(dev, &intel_encoder->base,
&intel_dvo_enc_funcs, encoder_type);
+ intel_encoder->disable = intel_disable_dvo;
+ intel_encoder->enable = intel_enable_dvo;
+
/* Now, try to find a controller */
for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
struct drm_connector *connector = &intel_connector->base;
@@ -396,17 +424,14 @@ void intel_dvo_init(struct drm_device *dev)
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
- intel_encoder->clone_mask =
- (1 << INTEL_DVO_TMDS_CLONE_BIT) |
- (1 << INTEL_ANALOG_CLONE_BIT);
+ intel_encoder->cloneable = true;
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_DVII);
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS:
- intel_encoder->clone_mask =
- (1 << INTEL_DVO_LVDS_CLONE_BIT);
+ intel_encoder->cloneable = false;
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 188399f..b01900d 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -959,42 +959,36 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
connector->doublescan_allowed = 0;
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+ intel_encoder->cloneable = false;
+
/* Set up the DDC bus. */
if (sdvox_reg == SDVOB) {
- intel_encoder->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == SDVOC) {
- intel_encoder->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIB) {
- intel_encoder->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIC) {
- intel_encoder->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMID) {
- intel_encoder->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == DDI_BUF_CTL(PORT_B)) {
DRM_DEBUG_DRIVER("LPT: detected output on DDI B\n");
- intel_encoder->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
intel_hdmi->ddi_port = PORT_B;
dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == DDI_BUF_CTL(PORT_C)) {
DRM_DEBUG_DRIVER("LPT: detected output on DDI C\n");
- intel_encoder->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
intel_hdmi->ddi_port = PORT_C;
dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == DDI_BUF_CTL(PORT_D)) {
DRM_DEBUG_DRIVER("LPT: detected output on DDI D\n");
- intel_encoder->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
intel_hdmi->ddi_port = PORT_D;
dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 9ae7fc9..3a42474 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -943,7 +943,7 @@ bool intel_lvds_init(struct drm_device *dev)
intel_connector_attach_encoder(intel_connector, intel_encoder);
intel_encoder->type = INTEL_OUTPUT_LVDS;
- intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+ intel_encoder->cloneable = false;
if (HAS_PCH_SPLIT(dev))
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
else if (IS_GEN4(dev))
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d630db8..5fe044c 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2129,8 +2129,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
intel_sdvo->is_hdmi = true;
}
- intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
- (1 << INTEL_ANALOG_CLONE_BIT));
+ intel_sdvo->base.cloneable= true;
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
if (intel_sdvo->is_hdmi)
@@ -2161,7 +2160,7 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
intel_sdvo->is_tv = true;
intel_sdvo->base.needs_tv_clock = true;
- intel_sdvo->base.clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
+ intel_sdvo->base.cloneable = false;
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
@@ -2204,8 +2203,7 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1;
}
- intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
- (1 << INTEL_ANALOG_CLONE_BIT));
+ intel_sdvo->base.cloneable = true;
intel_sdvo_connector_init(intel_sdvo_connector,
intel_sdvo);
@@ -2237,8 +2235,10 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
}
- intel_sdvo->base.clone_mask = ((1 << INTEL_ANALOG_CLONE_BIT) |
- (1 << INTEL_SDVO_LVDS_CLONE_BIT));
+ /* SDVO LVDS is cloneable because the SDVO encoder does the upscaling,
+ * as opposed to native LVDS, where we upscale with the panel-fitter
+ * (and hence only the native LVDS resolution could be cloned). */
+ intel_sdvo->base.cloneable = true;
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index e2169d2..3189f24 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1628,7 +1628,7 @@ intel_tv_init(struct drm_device *dev)
intel_connector_attach_encoder(intel_connector, intel_encoder);
intel_encoder->type = INTEL_OUTPUT_TVOUT;
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
- intel_encoder->clone_mask = (1 << INTEL_TV_CLONE_BIT);
+ intel_encoder->cloneable = false;
intel_encoder->base.possible_crtcs = ((1 << 0) | (1 << 1));
intel_encoder->base.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
intel_tv->type = DRM_MODE_CONNECTOR_Unknown;
--
1.7.7.6
next prev parent reply other threads:[~2012-07-03 10:34 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-03 9:27 [PATCH 00/43] [RFC] modeset rework, part 1 Daniel Vetter
2012-07-03 9:27 ` [PATCH 01/43] drm/i915: introduce for_each_encoder_on_crtc Daniel Vetter
2012-07-04 21:29 ` Paulo Zanoni
2012-07-05 7:50 ` [PATCH] " Daniel Vetter
2012-07-05 13:08 ` Daniel Vetter
2012-07-03 9:27 ` [PATCH 02/43] drm/i915: add crtc->enable/disable vfuncs insted of dpms Daniel Vetter
2012-07-03 9:27 ` [PATCH 03/43] drm/i915: rip out crtc prepare/commit indirection Daniel Vetter
2012-07-03 9:27 ` [PATCH 04/43] drm/i915: add direct encoder disable/enable infrastructure Daniel Vetter
2012-07-03 9:27 ` [PATCH 05/43] drm/i915: add missing gen2 pipe A quirk entries Daniel Vetter
2012-07-03 9:27 ` [PATCH 06/43] drm/i915: rip out the overlay pipe A workaround Daniel Vetter
2012-07-03 9:27 ` [PATCH 07/43] drm/i915: prepare load-detect pipe code for dpms changes Daniel Vetter
2012-07-03 9:28 ` [PATCH 08/43] drm/i915/hdmi: convert to encoder->disable/enable Daniel Vetter
2012-07-26 17:12 ` Paulo Zanoni
2012-07-03 9:28 ` [PATCH 09/43] drm/i915/tv: convert to encoder enable/disable Daniel Vetter
2012-07-03 9:28 ` [PATCH 10/43] drm/i915/lvds: ditch ->prepare special case Daniel Vetter
2012-07-03 9:28 ` [PATCH 11/43] drm/i915/lvds: convert to encoder disable/enable Daniel Vetter
2012-07-03 9:28 ` [PATCH 12/43] drm/i915/dp: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 13/43] drm/i915: create VLV_DSIPLAY_BASE #define Daniel Vetter
2012-07-03 9:28 ` [PATCH 14/43] drm/i915: group ADPA #defines together Daniel Vetter
2012-07-03 9:28 ` [PATCH 15/43] drm/i915: add inte_crt->adpa_reg Daniel Vetter
2012-07-03 9:28 ` [PATCH 16/43] drm/i915/crt: convert to encoder disable/enable Daniel Vetter
2012-07-03 9:28 ` [PATCH 17/43] drm/i915/sdvo: convert to encoder disabl/enable Daniel Vetter
2012-07-03 9:28 ` [PATCH 18/43] drm/i915: simplify dvo dpms interface Daniel Vetter
2012-07-03 9:28 ` Daniel Vetter [this message]
2012-07-03 9:28 ` [PATCH 20/43] drm/i915: add port parameter to intel_hdmi_init Daniel Vetter
2012-07-03 9:28 ` [PATCH 21/43] drm/i915: convert dpms functions of dvo/sdvo/crt Daniel Vetter
2012-07-03 9:28 ` [PATCH 22/43] drm/i915: rip out encoder->disable/enable checks Daniel Vetter
2012-07-03 9:28 ` [PATCH 23/43] drm/i915: clean up encoder_prepare/commit Daniel Vetter
2012-07-03 9:28 ` [PATCH 24/43] drm/fb helper: don't call drm_crtc_helper_set_config Daniel Vetter
2012-07-03 9:28 ` [PATCH 25/43] drm: remove the list_head from drm_mode_set Daniel Vetter
2012-07-03 9:28 ` [PATCH 26/43] drm/i915: copy&paste drm_crtc_helper_set_config Daniel Vetter
2012-07-03 9:28 ` [PATCH 27/43] drm/i915: call set_base directly Daniel Vetter
2012-07-03 9:28 ` [PATCH 28/43] drm/i915: inline intel_best_encoder Daniel Vetter
2012-07-03 9:28 ` [PATCH 29/43] drm/i915: copy&paste drm_crtc_helper_set_mode Daniel Vetter
2012-07-25 21:14 ` Paulo Zanoni
2012-07-03 9:28 ` [PATCH 30/43] drm/i915: simplify intel_crtc_prepare_encoders Daniel Vetter
2012-07-03 9:28 ` [PATCH 31/43] drm/i915: rip out encoder->prepare/commit Daniel Vetter
2012-07-03 9:28 ` [PATCH 32/43] drm/i915: call crtc functions directly Daniel Vetter
2012-07-03 9:28 ` [PATCH 33/43] drm/i915: WARN when trying to enabled an unused crtc Daniel Vetter
2012-07-03 9:28 ` [PATCH 34/43] drm/i915: Add interfaces to read out encoder/connector hw state Daniel Vetter
2012-07-03 9:28 ` [PATCH 35/43] drm/i915/dp: implement get_hw_state Daniel Vetter
2012-07-03 9:28 ` [PATCH 36/43] drm/i915/hdmi: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 37/43] drm/i915/tv: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 38/43] drm/i915/lvds: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 39/43] drm/i915/crt: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 40/43] drm/i915/sdvo: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 41/43] drm/i915/dvo: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 42/43] drm/i915: read out the modeset hw state at load and resume time Daniel Vetter
2012-07-03 9:28 ` [PATCH 43/43] drm/i915: check connector hw/sw state Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341307715-3886-20-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox