From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH] drm/i915: extract intel_set_pipe_timings from crtc_mode_set
Date: Mon, 1 Oct 2012 18:10:53 -0300 [thread overview]
Message-ID: <1349125853-3674-1-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1348176967-4323-6-git-send-email-przanoni@gmail.com>
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
Version 2: call intel_set_pipe_timings from both i9xx_crtc_mode_set
and ironlake_crtc_mode_set, instead of just ironlake, as requested by
Daniel Vetter.
The problem caused by calling this function from i9xx_crtc_mode_set
too is that now on i9xx we write to PIPESRC before writing to DSPSIZE
and DSPPOS. I could not find any evidence in our documentation that
this won't work, and the docs actually say the pipe registers should
be set before the plane registers.
Version 3: don't remove pipeconf bits on i9xx_crtc_mode_set.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 124 +++++++++++++++--------------------
1 file changed, 54 insertions(+), 70 deletions(-)
Still untested on i9xx.
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ed0dcea..6cf0d00 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4290,6 +4290,55 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
I915_WRITE(DPLL(pipe), dpll);
}
+static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum pipe pipe = intel_crtc->pipe;
+ uint32_t vsyncshift;
+
+ if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ /* the chip adds 2 halflines automatically */
+ adjusted_mode->crtc_vtotal -= 1;
+ adjusted_mode->crtc_vblank_end -= 1;
+ vsyncshift = adjusted_mode->crtc_hsync_start
+ - adjusted_mode->crtc_htotal / 2;
+ } else {
+ vsyncshift = 0;
+ }
+
+ if (INTEL_INFO(dev)->gen > 3)
+ I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
+
+ I915_WRITE(HTOTAL(pipe),
+ (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ I915_WRITE(HBLANK(pipe),
+ (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ I915_WRITE(HSYNC(pipe),
+ (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+ I915_WRITE(VTOTAL(pipe),
+ (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ I915_WRITE(VBLANK(pipe),
+ (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ I915_WRITE(VSYNC(pipe),
+ (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+ /* pipesrc controls the size that is scaled from, which should
+ * always be the user's requested size.
+ */
+ I915_WRITE(PIPESRC(pipe),
+ ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -4303,7 +4352,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dspcntr, pipeconf, vsyncshift;
+ u32 dspcntr, pipeconf;
bool ok, has_reduced_clock = false, is_sdvo = false;
bool is_lvds = false, is_tv = false, is_dp = false;
struct intel_encoder *encoder;
@@ -4438,40 +4487,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
pipeconf &= ~PIPECONF_INTERLACE_MASK;
if (!IS_GEN2(dev) &&
- adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+ adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
- /* the chip adds 2 halflines automatically */
- adjusted_mode->crtc_vtotal -= 1;
- adjusted_mode->crtc_vblank_end -= 1;
- vsyncshift = adjusted_mode->crtc_hsync_start
- - adjusted_mode->crtc_htotal/2;
- } else {
+ else
pipeconf |= PIPECONF_PROGRESSIVE;
- vsyncshift = 0;
- }
-
- if (!IS_GEN3(dev))
- I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
- I915_WRITE(HTOTAL(pipe),
- (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- I915_WRITE(HBLANK(pipe),
- (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- I915_WRITE(HSYNC(pipe),
- (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
-
- I915_WRITE(VTOTAL(pipe),
- (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- I915_WRITE(VBLANK(pipe),
- (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- I915_WRITE(VSYNC(pipe),
- (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
/* pipesrc and dspsize control the size that is scaled from,
* which should always be the user's requested size.
@@ -4480,8 +4501,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
((mode->vdisplay - 1) << 16) |
(mode->hdisplay - 1));
I915_WRITE(DSPPOS(plane), 0);
- I915_WRITE(PIPESRC(pipe),
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
I915_WRITE(PIPECONF(pipe), pipeconf);
POSTING_READ(PIPECONF(pipe));
@@ -5087,42 +5106,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
}
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
- /* the chip adds 2 halflines automatically */
- adjusted_mode->crtc_vtotal -= 1;
- adjusted_mode->crtc_vblank_end -= 1;
- I915_WRITE(VSYNCSHIFT(pipe),
- adjusted_mode->crtc_hsync_start
- - adjusted_mode->crtc_htotal/2);
- } else {
- I915_WRITE(VSYNCSHIFT(pipe), 0);
- }
-
- I915_WRITE(HTOTAL(pipe),
- (adjusted_mode->crtc_hdisplay - 1) |
- ((adjusted_mode->crtc_htotal - 1) << 16));
- I915_WRITE(HBLANK(pipe),
- (adjusted_mode->crtc_hblank_start - 1) |
- ((adjusted_mode->crtc_hblank_end - 1) << 16));
- I915_WRITE(HSYNC(pipe),
- (adjusted_mode->crtc_hsync_start - 1) |
- ((adjusted_mode->crtc_hsync_end - 1) << 16));
-
- I915_WRITE(VTOTAL(pipe),
- (adjusted_mode->crtc_vdisplay - 1) |
- ((adjusted_mode->crtc_vtotal - 1) << 16));
- I915_WRITE(VBLANK(pipe),
- (adjusted_mode->crtc_vblank_start - 1) |
- ((adjusted_mode->crtc_vblank_end - 1) << 16));
- I915_WRITE(VSYNC(pipe),
- (adjusted_mode->crtc_vsync_start - 1) |
- ((adjusted_mode->crtc_vsync_end - 1) << 16));
-
- /* pipesrc controls the size that is scaled from, which should
- * always be the user's requested size.
- */
- I915_WRITE(PIPESRC(pipe),
- ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+ intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
ironlake_set_m_n(crtc, mode, adjusted_mode);
--
1.7.11.4
next prev parent reply other threads:[~2012-10-01 21:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-20 21:36 [PATCH 0/5] Rework ironlake_crtc_mode_set V2 Paulo Zanoni
2012-09-20 21:36 ` [PATCH 1/5] drm/i915: don't recheck for invalid pipe bpp Paulo Zanoni
2012-09-24 22:47 ` Rodrigo Vivi
2012-09-20 21:36 ` [PATCH 2/5] drm/i915: extract set_m_n from ironlake_crtc_mode_set Paulo Zanoni
2012-09-24 23:00 ` Rodrigo Vivi
2012-09-20 21:36 ` [PATCH 3/5] drm/i915: extract compute_dpll " Paulo Zanoni
2012-09-24 23:08 ` Rodrigo Vivi
2012-09-20 21:36 ` [PATCH 4/5] drm/i915: remove unused variables " Paulo Zanoni
2012-09-24 23:36 ` Rodrigo Vivi
2012-09-25 8:44 ` Daniel Vetter
2012-09-20 21:36 ` [PATCH 5/5] drm/i915: extract intel_set_pipe_timings from crtc_mode_set Paulo Zanoni
2012-09-24 23:53 ` Rodrigo Vivi
2012-10-01 21:10 ` Paulo Zanoni [this message]
2012-10-02 13:40 ` [PATCH] " Rodrigo Vivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349125853-3674-1-git-send-email-przanoni@gmail.com \
--to=przanoni@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox