From: ville.syrjala@linux.intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v3] drm/i915: Fix pipe enabled mask for pipe C in WM calculations
Date: Thu, 21 Mar 2013 13:10:44 +0200 [thread overview]
Message-ID: <1363864244-10003-1-git-send-email-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20130321095215.GB8780@cantiga.alporthouse.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fix the incorrect enabled pipes mask for pipe C in the WM calculations.
Additionally, in an effort to make the code easier to understand,
populate the mask with 1 << PIPE_[ABC] instead of raw numbers.
v2: Use 1 << PIPE_[ABC] (ickle/danvet)
v3: Pass PIPE_[ABC] to g4x_compute_wm0() (ickle)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 44 ++++++++++++++++++++---------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 8a3d89e..d47f354 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -1301,17 +1301,17 @@ static void valleyview_update_wm(struct drm_device *dev)
vlv_update_drain_latency(dev);
- if (g4x_compute_wm0(dev, 0,
+ if (g4x_compute_wm0(dev, PIPE_A,
&valleyview_wm_info, latency_ns,
&valleyview_cursor_wm_info, latency_ns,
&planea_wm, &cursora_wm))
- enabled |= 1;
+ enabled |= 1 << PIPE_A;
- if (g4x_compute_wm0(dev, 1,
+ if (g4x_compute_wm0(dev, PIPE_B,
&valleyview_wm_info, latency_ns,
&valleyview_cursor_wm_info, latency_ns,
&planeb_wm, &cursorb_wm))
- enabled |= 2;
+ enabled |= 1 << PIPE_B;
if (single_plane_enabled(enabled) &&
g4x_compute_srwm(dev, ffs(enabled) - 1,
@@ -1357,17 +1357,17 @@ static void g4x_update_wm(struct drm_device *dev)
int plane_sr, cursor_sr;
unsigned int enabled = 0;
- if (g4x_compute_wm0(dev, 0,
+ if (g4x_compute_wm0(dev, PIPE_A,
&g4x_wm_info, latency_ns,
&g4x_cursor_wm_info, latency_ns,
&planea_wm, &cursora_wm))
- enabled |= 1;
+ enabled |= 1 << PIPE_A;
- if (g4x_compute_wm0(dev, 1,
+ if (g4x_compute_wm0(dev, PIPE_B,
&g4x_wm_info, latency_ns,
&g4x_cursor_wm_info, latency_ns,
&planeb_wm, &cursorb_wm))
- enabled |= 2;
+ enabled |= 1 << PIPE_B;
if (single_plane_enabled(enabled) &&
g4x_compute_srwm(dev, ffs(enabled) - 1,
@@ -1716,7 +1716,7 @@ static void ironlake_update_wm(struct drm_device *dev)
unsigned int enabled;
enabled = 0;
- if (g4x_compute_wm0(dev, 0,
+ if (g4x_compute_wm0(dev, PIPE_A,
&ironlake_display_wm_info,
ILK_LP0_PLANE_LATENCY,
&ironlake_cursor_wm_info,
@@ -1727,10 +1727,10 @@ static void ironlake_update_wm(struct drm_device *dev)
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
" plane %d, " "cursor: %d\n",
plane_wm, cursor_wm);
- enabled |= 1;
+ enabled |= 1 << PIPE_A;
}
- if (g4x_compute_wm0(dev, 1,
+ if (g4x_compute_wm0(dev, PIPE_B,
&ironlake_display_wm_info,
ILK_LP0_PLANE_LATENCY,
&ironlake_cursor_wm_info,
@@ -1741,7 +1741,7 @@ static void ironlake_update_wm(struct drm_device *dev)
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
" plane %d, cursor: %d\n",
plane_wm, cursor_wm);
- enabled |= 2;
+ enabled |= 1 << PIPE_B;
}
/*
@@ -1801,7 +1801,7 @@ static void sandybridge_update_wm(struct drm_device *dev)
unsigned int enabled;
enabled = 0;
- if (g4x_compute_wm0(dev, 0,
+ if (g4x_compute_wm0(dev, PIPE_A,
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
@@ -1812,10 +1812,10 @@ static void sandybridge_update_wm(struct drm_device *dev)
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
" plane %d, " "cursor: %d\n",
plane_wm, cursor_wm);
- enabled |= 1;
+ enabled |= 1 << PIPE_A;
}
- if (g4x_compute_wm0(dev, 1,
+ if (g4x_compute_wm0(dev, PIPE_B,
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
@@ -1826,7 +1826,7 @@ static void sandybridge_update_wm(struct drm_device *dev)
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
" plane %d, cursor: %d\n",
plane_wm, cursor_wm);
- enabled |= 2;
+ enabled |= 1 << PIPE_B;
}
/*
@@ -1904,7 +1904,7 @@ static void ivybridge_update_wm(struct drm_device *dev)
unsigned int enabled;
enabled = 0;
- if (g4x_compute_wm0(dev, 0,
+ if (g4x_compute_wm0(dev, PIPE_A,
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
@@ -1915,10 +1915,10 @@ static void ivybridge_update_wm(struct drm_device *dev)
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
" plane %d, " "cursor: %d\n",
plane_wm, cursor_wm);
- enabled |= 1;
+ enabled |= 1 << PIPE_A;
}
- if (g4x_compute_wm0(dev, 1,
+ if (g4x_compute_wm0(dev, PIPE_B,
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
@@ -1929,10 +1929,10 @@ static void ivybridge_update_wm(struct drm_device *dev)
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
" plane %d, cursor: %d\n",
plane_wm, cursor_wm);
- enabled |= 2;
+ enabled |= 1 << PIPE_B;
}
- if (g4x_compute_wm0(dev, 2,
+ if (g4x_compute_wm0(dev, PIPE_C,
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
@@ -1943,7 +1943,7 @@ static void ivybridge_update_wm(struct drm_device *dev)
DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
" plane %d, cursor: %d\n",
plane_wm, cursor_wm);
- enabled |= 3;
+ enabled |= 1 << PIPE_C;
}
/*
--
1.8.1.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2013-03-21 11:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-21 9:41 [PATCH v2] drm/i915: Fix pipe enabled mask for pipe C in WM calculations ville.syrjala
2013-03-21 9:52 ` Chris Wilson
2013-03-21 11:10 ` ville.syrjala [this message]
2013-03-21 11:32 ` [PATCH v3] " Chris Wilson
2013-05-01 18:43 ` Chris Wilson
2013-05-01 19:18 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363864244-10003-1-git-send-email-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox