From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 3/7] drm/i915: move dp clock computations to encoder->compute_config
Date: Fri, 19 Apr 2013 11:14:33 +0200 [thread overview]
Message-ID: <1366362877-15446-4-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1366362877-15446-1-git-send-email-daniel.vetter@ffwll.ch>
With the exception of hsw, which has dedicated DP clocks which run at
the fixed frequency already, and vlv, which doesn't have optmized
pre-defined dp clock parameters (yet).
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 97 +-----------------------------------
drivers/gpu/drm/i915/intel_dp.c | 45 +++++++++++++++++
2 files changed, 46 insertions(+), 96 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5437a5e..d91bad8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -114,15 +114,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
intel_clock_t *best_clock);
static bool
-intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-static bool
-intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock);
-
-static bool
intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock);
@@ -254,20 +245,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
.find_pll = intel_g4x_find_best_PLL,
};
-static const intel_limit_t intel_limits_g4x_display_port = {
- .dot = { .min = 161670, .max = 227000 },
- .vco = { .min = 1750000, .max = 3500000},
- .n = { .min = 1, .max = 2 },
- .m = { .min = 97, .max = 108 },
- .m1 = { .min = 0x10, .max = 0x12 },
- .m2 = { .min = 0x05, .max = 0x06 },
- .p = { .min = 10, .max = 20 },
- .p1 = { .min = 1, .max = 2},
- .p2 = { .dot_limit = 0,
- .p2_slow = 10, .p2_fast = 10 },
- .find_pll = intel_find_pll_g4x_dp,
-};
-
static const intel_limit_t intel_limits_pineview_sdvo = {
.dot = { .min = 20000, .max = 400000},
.vco = { .min = 1700000, .max = 3500000 },
@@ -374,20 +351,6 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
.find_pll = intel_g4x_find_best_PLL,
};
-static const intel_limit_t intel_limits_ironlake_display_port = {
- .dot = { .min = 25000, .max = 350000 },
- .vco = { .min = 1760000, .max = 3510000},
- .n = { .min = 1, .max = 2 },
- .m = { .min = 81, .max = 90 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
- .p = { .min = 10, .max = 20 },
- .p1 = { .min = 1, .max = 2},
- .p2 = { .dot_limit = 0,
- .p2_slow = 10, .p2_fast = 10 },
- .find_pll = intel_find_pll_ironlake_dp,
-};
-
static const intel_limit_t intel_limits_vlv_dac = {
.dot = { .min = 25000, .max = 270000 },
.vco = { .min = 4000000, .max = 6000000 },
@@ -485,10 +448,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
else
limit = &intel_limits_ironlake_single_lvds;
}
- } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
- intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
- limit = &intel_limits_ironlake_display_port;
- else
+ } else
limit = &intel_limits_ironlake_dac;
return limit;
@@ -509,8 +469,6 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
limit = &intel_limits_g4x_hdmi;
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
limit = &intel_limits_g4x_sdvo;
- } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
- limit = &intel_limits_g4x_display_port;
} else /* The option is for other outputs */
limit = &intel_limits_i9xx_sdvo;
@@ -758,59 +716,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
}
static bool
-intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- intel_clock_t clock;
-
- if (target < 200000) {
- clock.n = 1;
- clock.p1 = 2;
- clock.p2 = 10;
- clock.m1 = 12;
- clock.m2 = 9;
- } else {
- clock.n = 2;
- clock.p1 = 1;
- clock.p2 = 10;
- clock.m1 = 14;
- clock.m2 = 8;
- }
- intel_clock(dev, refclk, &clock);
- memcpy(best_clock, &clock, sizeof(intel_clock_t));
- return true;
-}
-
-/* DisplayPort has only two frequencies, 162MHz and 270MHz */
-static bool
-intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *match_clock,
- intel_clock_t *best_clock)
-{
- intel_clock_t clock;
- if (target < 200000) {
- clock.p1 = 2;
- clock.p2 = 10;
- clock.n = 2;
- clock.m1 = 23;
- clock.m2 = 8;
- } else {
- clock.p1 = 1;
- clock.p2 = 10;
- clock.n = 1;
- clock.m1 = 14;
- clock.m2 = 2;
- }
- clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
- clock.p = (clock.p1 * clock.p2);
- clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
- clock.vco = 0;
- memcpy(best_clock, &clock, sizeof(intel_clock_t));
- return true;
-}
-static bool
intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *match_clock,
intel_clock_t *best_clock)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b55f3ec..b1a3a64 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -660,6 +660,49 @@ intel_dp_i2c_init(struct intel_dp *intel_dp,
return ret;
}
+static void
+intel_dp_set_clock(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config, int link_bw)
+{
+ struct drm_device *dev = encoder->base.dev;
+
+ if (IS_G4X(dev)) {
+ if (link_bw == DP_LINK_BW_1_62) {
+ pipe_config->dpll.p1 = 2;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.n = 2;
+ pipe_config->dpll.m1 = 23;
+ pipe_config->dpll.m2 = 8;
+ } else {
+ pipe_config->dpll.p1 = 1;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.n = 1;
+ pipe_config->dpll.m1 = 14;
+ pipe_config->dpll.m2 = 2;
+ }
+ pipe_config->clock_set = true;
+ } else if (IS_HASWELL(dev)) {
+ /* Haswell has special-purpose DP DDI clocks. */
+ } else if (HAS_PCH_SPLIT(dev)) {
+ if (link_bw == DP_LINK_BW_1_62) {
+ pipe_config->dpll.n = 1;
+ pipe_config->dpll.p1 = 2;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.m1 = 12;
+ pipe_config->dpll.m2 = 9;
+ } else {
+ pipe_config->dpll.n = 2;
+ pipe_config->dpll.p1 = 1;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.m1 = 14;
+ pipe_config->dpll.m2 = 8;
+ }
+ pipe_config->clock_set = true;
+ } else if (IS_VALLEYVIEW(dev)) {
+ /* FIXME: Need to figure out optimized DP clocks for vlv. */
+ }
+}
+
bool
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
@@ -765,6 +808,8 @@ found:
}
pipe_config->pipe_bpp = bpp;
+ intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
+
return true;
}
--
1.7.11.7
next prev parent reply other threads:[~2013-04-19 9:14 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-19 9:14 [PATCH 0/7] dp dpll pipe_config conversion + random stuff Daniel Vetter
2013-04-19 9:14 ` [PATCH 1/7] drm/i915: consolidate pch pll computations a bit Daniel Vetter
2013-04-25 10:58 ` Ville Syrjälä
2013-04-19 9:14 ` [PATCH 2/7] drm/i915: shovel compute clock into crtc->config.dpll on ilk Daniel Vetter
2013-04-19 10:14 ` Ville Syrjälä
2013-04-19 11:36 ` [RFC][PATCH] drm/i915: Make struct dpll == intel_clock_t ville.syrjala
2013-04-20 14:50 ` Daniel Vetter
2013-04-20 15:19 ` [PATCH] drm/i915: shovel compute clock into crtc->config.dpll on ilk Daniel Vetter
2013-04-22 11:13 ` Ville Syrjälä
2013-04-22 15:12 ` Daniel Vetter
2013-04-25 11:00 ` Ville Syrjälä
2013-04-19 9:14 ` Daniel Vetter [this message]
2013-04-25 11:34 ` [PATCH 3/7] drm/i915: move dp clock computations to encoder->compute_config Ville Syrjälä
2013-04-25 12:04 ` Daniel Vetter
2013-04-25 12:21 ` Ville Syrjälä
2013-04-19 9:14 ` [PATCH 4/7] drm/i915: use pipe_config for lvds dithering Daniel Vetter
2013-04-25 11:57 ` Ville Syrjälä
2013-04-25 12:24 ` Daniel Vetter
2013-04-25 12:42 ` Ville Syrjälä
2013-04-25 13:16 ` Daniel Vetter
2013-04-25 13:20 ` [PATCH] " Daniel Vetter
2013-04-25 15:08 ` Ville Syrjälä
2013-04-25 15:54 ` Daniel Vetter
2013-04-25 15:54 ` Daniel Vetter
2013-04-25 16:09 ` Ville Syrjälä
2013-04-19 9:14 ` [PATCH 5/7] drm/i915: don't force matching p1 for g4x/ilk+ reduced pll settings Daniel Vetter
2013-04-19 14:53 ` Sean Paul
2013-04-19 9:14 ` [PATCH 6/7] drm/i915: remove redundant has_pch_encoder check Daniel Vetter
2013-04-25 11:59 ` Ville Syrjälä
2013-04-19 9:14 ` [PATCH 7/7] drm/i915: simplify config->pixel_multiplier handling Daniel Vetter
2013-04-25 12:08 ` Ville Syrjälä
2013-04-25 12:27 ` Daniel Vetter
2013-04-25 19:22 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366362877-15446-4-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox