From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915: BIOS and power context stolen mem handling for VLV v6
Date: Tue, 7 May 2013 14:34:31 -0700 [thread overview]
Message-ID: <1367962471-3534-1-git-send-email-jbarnes@virtuousgeek.org> (raw)
In-Reply-To: <1367959066-2381-1-git-send-email-jbarnes@virtuousgeek.org>
But we need to get the right stolen base and make pre-allocated objects
for BIOS stuff so we don't clobber it. If the BIOS hasn't allocated a
power context, we allocate one here too, from stolen space as required
by the docs.
v2: fix stolen to phys if ladder (Ben)
keep BIOS reserved space out of allocator altogether (Ben)
v3: fix mask of stolen base (Ben)
v4: clean up preallocated object on unload (Ben)
don't zero reg on unload (Jesse)
fix mask harder (Jesse)
v5: use unref for freeing stolen bits (Chris)
move alloc/free to intel_pm.c (Chris)
v6: NULL pctx at disable time so error paths work (Ben)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
drivers/gpu/drm/i915/i915_drv.h | 2 ++
drivers/gpu/drm/i915/i915_gem_stolen.c | 12 ++++++--
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 49 ++++++++++++++++++++++++++++++++
4 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c81100c..2fe5fd4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1073,6 +1073,8 @@ typedef struct drm_i915_private {
struct i915_gpu_error gpu_error;
+ struct drm_i915_gem_object *vlv_pctx;
+
/* list of fbdev register on this device */
struct intel_fbdev *fbdev;
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 67d3510..9137fa4c 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -62,7 +62,10 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev)
* its value of TOLUD.
*/
base = 0;
- if (INTEL_INFO(dev)->gen >= 6) {
+ if (IS_VALLEYVIEW(dev)) {
+ pci_read_config_dword(pdev, 0x5c, &base);
+ base &= ~((1<<20) - 1);
+ } else if (INTEL_INFO(dev)->gen >= 6) {
/* Read Base Data of Stolen Memory Register (BDSM) directly.
* Note that there is also a MCHBAR miror at 0x1080c0 or
* we could use device 2:0x5c instead.
@@ -183,6 +186,7 @@ void i915_gem_cleanup_stolen(struct drm_device *dev)
int i915_gem_init_stolen(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int bios_reserved = 0;
dev_priv->mm.stolen_base = i915_stolen_to_physical(dev);
if (dev_priv->mm.stolen_base == 0)
@@ -191,8 +195,12 @@ int i915_gem_init_stolen(struct drm_device *dev)
DRM_DEBUG_KMS("found %zd bytes of stolen memory at %08lx\n",
dev_priv->gtt.stolen_size, dev_priv->mm.stolen_base);
+ if (IS_VALLEYVIEW(dev))
+ bios_reserved = 1024*1024; /* top 1M on VLV/BYT */
+
/* Basic memrange allocator for stolen space */
- drm_mm_init(&dev_priv->mm.stolen, 0, dev_priv->gtt.stolen_size);
+ drm_mm_init(&dev_priv->mm.stolen, 0, dev_priv->gtt.stolen_size -
+ bios_reserved);
return 0;
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a470103..a809a56 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -700,6 +700,7 @@
#define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4)
#define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8)
#define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac)
+#define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120)
#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 9b3e90e..e60cd3e 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2562,6 +2562,11 @@ static void valleyview_disable_rps(struct drm_device *dev)
spin_unlock_irq(&dev_priv->rps.lock);
I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
+
+ if (dev_priv->vlv_pctx) {
+ drm_gem_object_unreference(&dev_priv->vlv_pctx->base);
+ dev_priv->vlv_pctx = NULL;
+ }
}
int intel_enable_rc6(const struct drm_device *dev)
@@ -2856,6 +2861,48 @@ static void vlv_rps_timer_work(struct work_struct *work)
mutex_unlock(&dev_priv->rps.hw_lock);
}
+static void valleyview_setup_pctx(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *pctx;
+ unsigned long pctx_paddr;
+ u32 pcbr;
+ int pctx_size = 24*1024;
+
+ pcbr = I915_READ(VLV_PCBR);
+ if (pcbr) {
+ /* BIOS set it up already, grab the pre-alloc'd space */
+ int pcbr_offset;
+
+ pcbr_offset = (pcbr & (~4095)) - dev_priv->mm.stolen_base;
+ pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv->dev,
+ pcbr_offset,
+ pcbr_offset,
+ pctx_size);
+ goto out;
+ }
+
+ /*
+ * From the Gunit register HAS:
+ * The Gfx driver is expected to program this register and ensure
+ * proper allocation within Gfx stolen memory. For example, this
+ * register should be programmed such than the PCBR range does not
+ * overlap with other ranges, such as the frame buffer, protected
+ * memory, or any other relevant ranges.
+ */
+ pctx = i915_gem_object_create_stolen(dev, pctx_size);
+ if (!pctx) {
+ DRM_DEBUG("not enough stolen space for PCTX, disabling\n");
+ return;
+ }
+
+ pctx_paddr = dev_priv->mm.stolen_base + pctx->stolen->start;
+ I915_WRITE(VLV_PCBR, pctx_paddr);
+
+out:
+ dev_priv->vlv_pctx = pctx;
+}
+
static void valleyview_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -2870,6 +2917,8 @@ static void valleyview_enable_rps(struct drm_device *dev)
I915_WRITE(GTFIFODBG, gtfifodbg);
}
+ valleyview_setup_pctx(dev);
+
gen6_gt_force_wake_get(dev_priv);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
--
1.7.10.4
next prev parent reply other threads:[~2013-05-07 21:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-07 18:50 [PATCH] drm/i915: BIOS and power context stolen mem handling for VLV v3 Jesse Barnes
2013-05-07 19:34 ` [PATCH] drm/i915: BIOS and power context stolen mem handling for VLV v4 Jesse Barnes
2013-05-07 19:50 ` Chris Wilson
2013-05-07 20:37 ` [PATCH] drm/i915: BIOS and power context stolen mem handling for VLV v5 Jesse Barnes
2013-05-07 21:34 ` Jesse Barnes [this message]
2013-05-07 21:57 ` [PATCH] drm/i915: BIOS and power context stolen mem handling for VLV v6 Chris Wilson
2013-05-07 22:08 ` Jesse Barnes
2013-05-07 22:14 ` Chris Wilson
2013-05-07 22:32 ` Jesse Barnes
2013-05-07 23:23 ` Jesse Barnes
2013-05-08 13:28 ` Chris Wilson
2013-05-07 23:18 ` Jesse Barnes
2013-05-08 2:56 ` Teres Alexis, Alan Previn
2013-05-07 19:45 ` [PATCH] drm/i915: BIOS and power context stolen mem handling for VLV v3 Chris Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367962471-3534-1-git-send-email-jbarnes@virtuousgeek.org \
--to=jbarnes@virtuousgeek.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox