[PATCH] drm/i915: Quirk the pipe A quirk in the modeset state checker

[Daniel Vetter <daniel.vetter@ffwll.ch>]

If we always force the pipe A to on we can't use the hw state to
decide whether it should be on. Hence quirk the quirk.

The problem is that crtc->active tracks the state of the entire
display pipe, i.e. including planes, encoders and all. But our hw
state readout simply looks at the pipe. But with the pipe A quirk we
force-enable that (together with it's pll). To fix that mismatch we
have two options:
- Quirk the checked state to match what our sw tracking states if the
  pipe A quirk is in effect.
- Improve the hw state readout to not get fooled by the pipe A quirk.

Since we already have similar state clamping in e.g. assert_pipe I've
opted for the first variant. Also note that we don't really loose any
state checking: Individual pieces of the abstract crtc pipe are
checked in the enable/disable functions with the various asssert_*
checks we have, and the hw state check code doesn't check anything if
the pipe is off anyway.

v2: Pimp commit message after discussion with Chris and only apply the
quirk for the quirk if we're checking pipe A. Otherwise we'll miss
state checking for pipe B on i830M ...

v3: Make the code comment consistent with the improved commit message,
too (Chris).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64764
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-Tested-by: mlsemon35@gmail.com (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d63bb3fa..09eedfa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8099,6 +8099,11 @@ intel_modeset_check_state(struct drm_device *dev)
 		pipe_config.cpu_transcoder = crtc->config.cpu_transcoder;
 		active = dev_priv->display.get_pipe_config(crtc,
 							   &pipe_config);
+
+		/* hw state is inconsistent with the pipe A quirk */
+		if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
+			active = crtc->active;
+
 		WARN(crtc->active != active,
 		     "crtc active state doesn't match with hw state "
 		     "(expected %i, found %i)\n", crtc->active, active);
-- 
1.7.10.4