Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Damien Lespiau <damien.lespiau@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 4/5] drm/i915: Add a for_each_sprite() macro
Date: Mon,  3 Mar 2014 17:31:47 +0000	[thread overview]
Message-ID: <1393867908-4604-5-git-send-email-damien.lespiau@intel.com> (raw)
In-Reply-To: <1393867908-4604-1-git-send-email-damien.lespiau@intel.com>

This macro is similar to for_each_pipe() we already have. Convert the
two call sites we have at the same time.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 16 ++++++++--------
 2 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 05cfcc1..ad51a0e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -159,6 +159,7 @@ enum hpd_pin {
 	 I915_GEM_DOMAIN_VERTEX)
 
 #define for_each_pipe(p) for ((p) = 0; (p) < INTEL_INFO(dev)->num_pipes; (p)++)
+#define for_each_sprite(p, s) for ((s) = 0; (s) < INTEL_INFO(dev)->num_sprites; (s)++)
 
 #define for_each_encoder_on_crtc(dev, __crtc, intel_encoder) \
 	list_for_each_entry((intel_encoder), &(dev)->mode_config.encoder_list, base.head) \
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 71638fd..5d8763f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1189,16 +1189,16 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
 				    enum pipe pipe)
 {
 	struct drm_device *dev = dev_priv->dev;
-	int reg, i;
+	int reg, sprite;
 	u32 val;
 
 	if (IS_VALLEYVIEW(dev)) {
-		for (i = 0; i < INTEL_INFO(dev)->num_sprites; i++) {
-			reg = SPCNTR(pipe, i);
+		for_each_sprite(pipe, sprite) {
+			reg = SPCNTR(pipe, sprite);
 			val = I915_READ(reg);
 			WARN((val & SP_ENABLE),
 			     "sprite %c assertion failure, should be off on pipe %c but is still active\n",
-			     sprite_name(pipe, i), pipe_name(pipe));
+			     sprite_name(pipe, sprite), pipe_name(pipe));
 		}
 	} else if (INTEL_INFO(dev)->gen >= 7) {
 		reg = SPRCTL(pipe);
@@ -10997,7 +10997,7 @@ void intel_modeset_suspend_hw(struct drm_device *dev)
 void intel_modeset_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int j, ret;
+	int sprite, ret;
 	enum pipe pipe;
 
 	drm_mode_config_init(dev);
@@ -11037,11 +11037,11 @@ void intel_modeset_init(struct drm_device *dev)
 
 	for_each_pipe(pipe) {
 		intel_crtc_init(dev, pipe);
-		for (j = 0; j < INTEL_INFO(dev)->num_sprites; j++) {
-			ret = intel_plane_init(dev, pipe, j);
+		for_each_sprite(pipe, sprite) {
+			ret = intel_plane_init(dev, pipe, sprite);
 			if (ret)
 				DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
-					      pipe_name(pipe), sprite_name(pipe, j), ret);
+					      pipe_name(pipe), sprite_name(pipe, sprite), ret);
 		}
 	}
 
-- 
1.8.3.1

  parent reply	other threads:[~2014-03-03 17:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-03 17:31 [PATCH 0/5] Make num_sprites a per pipe value (v3) Damien Lespiau
2014-03-03 17:31 ` [PATCH 1/5] drm/i915: Use a pipe variable to cycle through the pipes Damien Lespiau
2014-03-03 17:31 ` [PATCH 2/5] drm/i915: Don't declare unnecessary shadowing variable Damien Lespiau
2014-03-03 17:31 ` [PATCH 3/5] drm/i915: Replace a few for_each_pipe(i) by for_each_pipe(pipe) Damien Lespiau
2014-03-03 17:31 ` Damien Lespiau [this message]
2014-03-03 17:31 ` [PATCH 5/5] drm/i915: Make num_sprites a per-pipe value Damien Lespiau
2014-03-03 21:16 ` [PATCH 0/5] Make num_sprites a per pipe value (v3) Chris Wilson
2014-03-05 17:48   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393867908-4604-5-git-send-email-damien.lespiau@intel.com \
    --to=damien.lespiau@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox