public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915: move power domain init earlier during system resume
Date: Fri, 21 Mar 2014 12:10:31 +0200	[thread overview]
Message-ID: <1395396631-12243-1-git-send-email-imre.deak@intel.com> (raw)

During resume the intel hda audio driver depends on the i915 driver
reinitializing the audio power domain. Since the order of calling the
i915 resume handler wrt. that of the audio driver is not guaranteed,
move the power domain reinitialization step to the resume_early
handler. This is guaranteed to run before the resume handler of any
other driver.

The power domain initialization in turn requires us to enable the i915
pci device first, so move that part earlier too.

Accordingly disabling of the i915 pci device should happen after the
audio suspend handler ran. So move the disabling later from the i915
resume handler to the resume_late handler.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c | 68 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 57 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index fa5d0ed..696e127 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -537,6 +537,15 @@ static void intel_resume_hotplug(struct drm_device *dev)
 	drm_helper_hpd_irq_event(dev);
 }
 
+static int i915_drm_thaw_early(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	intel_power_domains_init_hw(dev_priv);
+
+	return 0;
+}
+
 static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -553,8 +562,6 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
 		mutex_unlock(&dev->struct_mutex);
 	}
 
-	intel_power_domains_init_hw(dev_priv);
-
 	i915_restore_state(dev);
 	intel_opregion_setup(dev);
 
@@ -619,11 +626,8 @@ static int i915_drm_thaw(struct drm_device *dev)
 	return __i915_drm_thaw(dev, true);
 }
 
-int i915_resume(struct drm_device *dev)
+static int i915_resume_early(struct drm_device *dev)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret;
-
 	if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
 		return 0;
 
@@ -632,6 +636,14 @@ int i915_resume(struct drm_device *dev)
 
 	pci_set_master(dev->pdev);
 
+	return i915_drm_thaw_early(dev);
+}
+
+int i915_resume(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
+
 	/*
 	 * Platforms with opregion should have sane BIOS, older ones (gen3 and
 	 * earlier) need to restore the GTT mappings since the BIOS might clear
@@ -645,6 +657,14 @@ int i915_resume(struct drm_device *dev)
 	return 0;
 }
 
+int i915_resume_legacy(struct drm_device *dev)
+{
+	i915_resume_early(dev);
+	i915_resume(dev);
+
+	return 0;
+}
+
 /**
  * i915_reset - reset chip after a hang
  * @dev: drm device to reset
@@ -776,7 +796,6 @@ static int i915_pm_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct drm_device *drm_dev = pci_get_drvdata(pdev);
-	int error;
 
 	if (!drm_dev || !drm_dev->dev_private) {
 		dev_err(dev, "DRM not initialized, aborting suspend.\n");
@@ -786,9 +805,16 @@ static int i915_pm_suspend(struct device *dev)
 	if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
 		return 0;
 
-	error = i915_drm_freeze(drm_dev);
-	if (error)
-		return error;
+	return i915_drm_freeze(drm_dev);
+}
+
+static int i915_pm_suspend_late(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+		return 0;
 
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -796,6 +822,14 @@ static int i915_pm_suspend(struct device *dev)
 	return 0;
 }
 
+static int i915_pm_resume_early(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_resume_early(drm_dev);
+}
+
 static int i915_pm_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -817,6 +851,14 @@ static int i915_pm_freeze(struct device *dev)
 	return i915_drm_freeze(drm_dev);
 }
 
+static int i915_pm_thaw_early(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_drm_thaw_early(drm_dev);
+}
+
 static int i915_pm_thaw(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -887,10 +929,14 @@ static int i915_runtime_resume(struct device *device)
 
 static const struct dev_pm_ops i915_pm_ops = {
 	.suspend = i915_pm_suspend,
+	.suspend_late = i915_pm_suspend_late,
+	.resume_early = i915_pm_resume_early,
 	.resume = i915_pm_resume,
 	.freeze = i915_pm_freeze,
+	.thaw_early = i915_pm_thaw_early,
 	.thaw = i915_pm_thaw,
 	.poweroff = i915_pm_poweroff,
+	.restore_early = i915_pm_resume_early,
 	.restore = i915_pm_resume,
 	.runtime_suspend = i915_runtime_suspend,
 	.runtime_resume = i915_runtime_resume,
@@ -933,7 +979,7 @@ static struct drm_driver driver = {
 
 	/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
 	.suspend = i915_suspend,
-	.resume = i915_resume,
+	.resume = i915_resume_legacy,
 
 	.device_is_agp = i915_driver_device_is_agp,
 	.master_create = i915_master_create,
-- 
1.8.4

             reply	other threads:[~2014-03-21 10:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-21 10:10 Imre Deak [this message]
2014-04-01 16:55 ` [PATCH v2] drm/i915: move power domain init earlier during system resume Imre Deak
2014-04-01 17:48   ` Daniel Vetter
2014-04-01 18:50     ` Imre Deak
2014-04-01 20:26       ` Daniel Vetter
2014-04-02 12:59         ` [Intel-gfx] " Takashi Iwai
2014-04-03 15:23           ` Daniel Vetter
2014-04-03 15:31             ` Takashi Iwai
2014-04-03 21:06               ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395396631-12243-1-git-send-email-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox