Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: DRI Development <dri-devel@lists.freedesktop.org>
Cc: linux-fbdev@vger.kernel.org,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Plagniol-Villard <plagnioj@jcrosoft.com>
Subject: [PATCH 1/2] video/fbdev: Always built-in video= cmdline parsing
Date: Wed,  6 Aug 2014 14:52:41 +0200	[thread overview]
Message-ID: <1407329562-10832-1-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1407312512-6533-1-git-send-email-daniel.vetter@ffwll.ch>

In drm/i915 we want to get at the video= cmdline modes even when we
don't have fbdev support enabled, so that users can always override
the kernel's initial mode selection.

But that gives us a direct depency upon the parsing code in the fbdev
subsystem. Since it's so little code just extract these 2 functions
and always build them in.

Whiel at it fix the checkpatch fail in this code.

v2: Also move fb_mode_option. Spotted by the kbuild.

v3: Review from Geert:
- Keep the old copyright notice from fb_mem.c, although I have no
idea what exactly applies.
- Only compile this when needed.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

--

I prefer if we can merge this through drm-next since we'll use it
there in follow-up patches.
-Daniel
---
 drivers/video/fbdev/Kconfig           |   4 ++
 drivers/video/fbdev/core/Makefile     |   1 +
 drivers/video/fbdev/core/fb_cmdline.c | 110 ++++++++++++++++++++++++++++++++++
 drivers/video/fbdev/core/fbmem.c      |  92 ----------------------------
 drivers/video/fbdev/core/modedb.c     |   3 -
 5 files changed, 115 insertions(+), 95 deletions(-)
 create mode 100644 drivers/video/fbdev/core/fb_cmdline.c

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 59c98bfd5a8a..f1458c95a688 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -4,6 +4,7 @@
 
 menuconfig FB
 	tristate "Support for frame buffer devices"
+	select FB_CMDLINE
 	---help---
 	  The frame buffer device provides an abstraction for the graphics
 	  hardware. It represents the frame buffer of some video hardware and
@@ -52,6 +53,9 @@ config FIRMWARE_EDID
 	 combination with certain motherboards and monitors are known to
 	 suffer from this problem.
 
+config FB_CMDLINE
+	bool
+
 config FB_DDC
        tristate
        depends on FB
diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
index fa306538dac2..67f28e20a892 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -1,4 +1,5 @@
 obj-y                             += fb_notify.o
+obj-$(CONFIG_FB_CMDLINE)          += fb_cmdline.o
 obj-$(CONFIG_FB)                  += fb.o
 fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
                                      modedb.o fbcvt.o
diff --git a/drivers/video/fbdev/core/fb_cmdline.c b/drivers/video/fbdev/core/fb_cmdline.c
new file mode 100644
index 000000000000..39509ccd92f1
--- /dev/null
+++ b/drivers/video/fbdev/core/fb_cmdline.c
@@ -0,0 +1,110 @@
+/*
+ *  linux/drivers/video/fb_cmdline.c
+ *
+ *  Copyright (C) 2014 Intel Corp
+ *  Copyright (C) 1994 Martin Schaller
+ *
+ *	2001 - Documented with DocBook
+ *	- Brad Douglas <brad@neruo.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Authors:
+ *    Vetter <danie.vetter@ffwll.ch>
+ */
+#include <linux/init.h>
+#include <linux/fb.h>
+
+static char *video_options[FB_MAX] __read_mostly;
+static int ofonly __read_mostly;
+
+const char *fb_mode_option;
+EXPORT_SYMBOL_GPL(fb_mode_option);
+
+/**
+ * fb_get_options - get kernel boot parameters
+ * @name:   framebuffer name as it would appear in
+ *          the boot parameter line
+ *          (video=<name>:<options>)
+ * @option: the option will be stored here
+ *
+ * NOTE: Needed to maintain backwards compatibility
+ */
+int fb_get_options(const char *name, char **option)
+{
+	char *opt, *options = NULL;
+	int retval = 0;
+	int name_len = strlen(name), i;
+
+	if (name_len && ofonly && strncmp(name, "offb", 4))
+		retval = 1;
+
+	if (name_len && !retval) {
+		for (i = 0; i < FB_MAX; i++) {
+			if (video_options[i] == NULL)
+				continue;
+			if (!video_options[i][0])
+				continue;
+			opt = video_options[i];
+			if (!strncmp(name, opt, name_len) &&
+			    opt[name_len] == ':')
+				options = opt + name_len + 1;
+		}
+	}
+	/* No match, pass global option */
+	if (!options && option && fb_mode_option)
+		options = kstrdup(fb_mode_option, GFP_KERNEL);
+	if (options && !strncmp(options, "off", 3))
+		retval = 1;
+
+	if (option)
+		*option = options;
+
+	return retval;
+}
+EXPORT_SYMBOL(fb_get_options);
+
+/**
+ *	video_setup - process command line options
+ *	@options: string of options
+ *
+ *	Process command line options for frame buffer subsystem.
+ *
+ *	NOTE: This function is a __setup and __init function.
+ *            It only stores the options.  Drivers have to call
+ *            fb_get_options() as necessary.
+ *
+ *	Returns zero.
+ *
+ */
+static int __init video_setup(char *options)
+{
+	int i, global = 0;
+
+	if (!options || !*options)
+		global = 1;
+
+	if (!global && !strncmp(options, "ofonly", 6)) {
+		ofonly = 1;
+		global = 1;
+	}
+
+	if (!global && !strchr(options, ':')) {
+		fb_mode_option = options;
+		global = 1;
+	}
+
+	if (!global) {
+		for (i = 0; i < FB_MAX; i++) {
+			if (video_options[i] == NULL) {
+				video_options[i] = options;
+				break;
+			}
+		}
+	}
+
+	return 1;
+}
+__setup("video=", video_setup);
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index b5e85f6c1c26..0705d8883ede 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1908,96 +1908,4 @@ int fb_new_modelist(struct fb_info *info)
 	return err;
 }
 
-static char *video_options[FB_MAX] __read_mostly;
-static int ofonly __read_mostly;
-
-/**
- * fb_get_options - get kernel boot parameters
- * @name:   framebuffer name as it would appear in
- *          the boot parameter line
- *          (video=<name>:<options>)
- * @option: the option will be stored here
- *
- * NOTE: Needed to maintain backwards compatibility
- */
-int fb_get_options(const char *name, char **option)
-{
-	char *opt, *options = NULL;
-	int retval = 0;
-	int name_len = strlen(name), i;
-
-	if (name_len && ofonly && strncmp(name, "offb", 4))
-		retval = 1;
-
-	if (name_len && !retval) {
-		for (i = 0; i < FB_MAX; i++) {
-			if (video_options[i] == NULL)
-				continue;
-			if (!video_options[i][0])
-				continue;
-			opt = video_options[i];
-			if (!strncmp(name, opt, name_len) &&
-			    opt[name_len] == ':')
-				options = opt + name_len + 1;
-		}
-	}
-	/* No match, pass global option */
-	if (!options && option && fb_mode_option)
-		options = kstrdup(fb_mode_option, GFP_KERNEL);
-	if (options && !strncmp(options, "off", 3))
-		retval = 1;
-
-	if (option)
-		*option = options;
-
-	return retval;
-}
-EXPORT_SYMBOL(fb_get_options);
-
-#ifndef MODULE
-/**
- *	video_setup - process command line options
- *	@options: string of options
- *
- *	Process command line options for frame buffer subsystem.
- *
- *	NOTE: This function is a __setup and __init function.
- *            It only stores the options.  Drivers have to call
- *            fb_get_options() as necessary.
- *
- *	Returns zero.
- *
- */
-static int __init video_setup(char *options)
-{
-	int i, global = 0;
-
-	if (!options || !*options)
- 		global = 1;
-
- 	if (!global && !strncmp(options, "ofonly", 6)) {
- 		ofonly = 1;
- 		global = 1;
- 	}
-
- 	if (!global && !strchr(options, ':')) {
- 		fb_mode_option = options;
- 		global = 1;
- 	}
-
- 	if (!global) {
- 		for (i = 0; i < FB_MAX; i++) {
- 			if (video_options[i] == NULL) {
- 				video_options[i] = options;
- 				break;
- 			}
-
-		}
-	}
-
-	return 1;
-}
-__setup("video=", video_setup);
-#endif
-
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/core/modedb.c b/drivers/video/fbdev/core/modedb.c
index a9a907c440d7..388f7971494b 100644
--- a/drivers/video/fbdev/core/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
@@ -29,9 +29,6 @@
 #define DPRINTK(fmt, args...)
 #endif
 
-const char *fb_mode_option;
-EXPORT_SYMBOL_GPL(fb_mode_option);
-
 /*
  *  Standard video mode definitions (taken from XFree86)
  */
-- 
2.0.1

  parent reply	other threads:[~2014-08-06 12:52 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-06  8:08 [PATCH] drm: Perform cmdline mode parsing during connector initialisation Daniel Vetter
2014-08-06  9:43 ` [PATCH] video/fbdev: Always built-in video= cmdline parsing Daniel Vetter
2014-08-06 10:27   ` Geert Uytterhoeven
2014-08-06 12:48     ` Daniel Vetter
2014-08-06 12:05 ` Daniel Vetter
2014-08-06 12:52 ` Daniel Vetter [this message]
2014-08-06 12:52   ` [PATCH 2/2] drm: Perform cmdline mode parsing during connector initialisation Daniel Vetter
2014-09-30 11:40   ` [PATCH 1/2] video/fbdev: Always built-in video= cmdline parsing Tomi Valkeinen
2014-09-30 11:53     ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407329562-10832-1-git-send-email-daniel.vetter@ffwll.ch \
    --to=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=plagnioj@jcrosoft.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox