[PATCH] fixing eu_mask value for BXT due to wrong bit mapping

[Dongwon Kim <dongwon.kim@intel.com>]

From: dw kim <dongwon.kim@intel.com>

Correct bit mapping of EUs in 'eu_disable' fuse register
for each subslice is (each word represents one subslice),

bit # 7   6   5   4   3   2   1   0
EU # 11  10   9   8   3   2   1   0

In BXT, each subslice has 6 EUs at most, which are EU0~EU2
and EU8~EU10 (EU11 and EU3 don't exist). Therefore, correct
eu_mask should be 0x77 to cover all EUs in each subslice that
can be possibly enabled.

Cc: Matthew D Roper <matthew.d.roper@intel.com>
Signed-off-by: dw kim <dongwon.kim@intel.com>
---
 drivers/gpu/drm/i915/i915_dma.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 066a0ef..810f148 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -633,13 +633,21 @@ static void gen9_sseu_info_init(struct drm_device *dev)
 
 	/*
 	 * BXT has a single slice. BXT also has at most 6 EU per subslice,
-	 * and therefore only the lowest 6 bits of the 8-bit EU disable
-	 * fields are valid.
+	 * and bit mappings vs EU # in eu_disable fuse value in one subslice
+         * is like this;
+         *
+         *  Bit # 7   6   5   4   3   2   1   0
+         *  EU # 11  10   9   8   3   2   1   0
+         *
+         * Since only EUs with number "0, 1, 2, 8, 9, 10" are available in
+         * each subslice in BXT, bits in eu_mask should also be set according
+         * to this mapping, therefore, eu_mask = 0x77.
 	*/
+
 	if (IS_BROXTON(dev)) {
 		s_max = 1;
 		eu_max = 6;
-		eu_mask = 0x3f;
+		eu_mask = 0x77;
 	}
 
 	info = (struct intel_device_info *)&dev_priv->info;
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx