From: Mika Kahola <mika.kahola@intel.com>
To: Lukas Wunner <lukas@wunner.de>
Cc: intel-gfx@lists.freedesktop.org,
Thierry Reding <thierry.reding@gmail.com>
Subject: Re: [PATCH v5 2/2] drm/i915: Check DP no aux transaction bit on link training
Date: Wed, 23 Dec 2015 14:30:13 +0200 [thread overview]
Message-ID: <1450873813.14874.7.camel@sorvi> (raw)
In-Reply-To: <20151222155341.GA1128@wunner.de>
On Tue, 2015-12-22 at 16:53 +0100, Lukas Wunner wrote:
> Hi Mika,
>
> On Mon, Dec 21, 2015 at 01:39:15PM +0200, Mika Kahola wrote:
> > Check if no AUX transactions are required on DP link training.
> > If this bit is set, we can reuse the known good drive current
> > and pre-emphasis level from the last "full" link training.
> >
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393
> > Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 2 +-
> > drivers/gpu/drm/i915/intel_dp_link_training.c | 19 +++++++++++++++++++
> > drivers/gpu/drm/i915/intel_drv.h | 1 +
> > 3 files changed, 21 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 6b36d82..3137187 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -3852,7 +3852,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
> > intel_dp->DP = DP;
> > }
> >
> > -static bool
> > +bool
> > intel_dp_get_dpcd(struct intel_dp *intel_dp)
> > {
> > struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> > diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > index 59d59be..5fb3f97 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > @@ -85,6 +85,25 @@ static bool
> > intel_dp_reset_link_train(struct intel_dp *intel_dp,
> > uint8_t dp_train_pat)
> > {
> > + bool has_dpcd;
> > + bool no_aux_handshake = false;
> > +
> > + has_dpcd = intel_dp_get_dpcd(intel_dp);
> > +
> > + /*
> > + * Source device can try to use drive current and pre-emphasis
> > + * parameters computed by the last "full" link training if the
> > + * DP_NO_AUX_HANDSHAKE_LINK_TRAINING bit is set to 1.
> > + */
> > + if (has_dpcd) {
> > + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
> > + no_aux_handshake = (intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
> > + DP_NO_AUX_HANDSHAKE_LINK_TRAINING);
> > + }
> > + }
> > +
> > + intel_dp->train_set_valid &= no_aux_handshake;
> > +
>
> If Thierry Reding's patches get merged (posted to dri-devel@ on Dec 14
> with <1450097764-30063-1-git-send-email-thierry.reding@gmail.com>),
> you could just use
>
> if (has_dpcd && drm_dp_fast_training_cap(intel_dp->dpcd))
> intel_dp->train_set_valid &= true;
>
> Also, if the patches get merged, the no_aux_handshake attribute in dev_priv
> can be dropped (set in intel_edp_init_connector() but never read).
>
Thank you for the tip. I have missed this Thierry's patch.
Happy Holidays!
-Mika-
> Best regards,
>
> Lukas
>
> > DRM_DEBUG_KMS("link training optimization: %s\n",
> > intel_dp->train_set_valid ? "true" : "false");
> >
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index d523ebb..c36a70c 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1239,6 +1239,7 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
> > bool intel_dp_compute_config(struct intel_encoder *encoder,
> > struct intel_crtc_state *pipe_config);
> > bool intel_dp_is_edp(struct drm_device *dev, enum port port);
> > +bool intel_dp_get_dpcd(struct intel_dp *intel_dp);
> > enum irqreturn intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port,
> > bool long_hpd);
> > void intel_edp_backlight_on(struct intel_dp *intel_dp);
> > --
> > 1.9.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-12-23 12:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-21 11:39 [PATCH v5 0/2] drm/i915: Disable link training optimization if DP config has changed Mika Kahola
2015-12-21 11:39 ` [PATCH v5 1/2] drm/i915: Disable fast link training if DP config changes Mika Kahola
2015-12-21 11:39 ` [PATCH v5 2/2] drm/i915: Check DP no aux transaction bit on link training Mika Kahola
2015-12-22 15:53 ` Lukas Wunner
2015-12-23 10:07 ` Jani Nikula
2015-12-23 12:30 ` Mika Kahola [this message]
2016-01-04 17:27 ` Thierry Reding
2016-01-05 11:45 ` Mika Kahola
2015-12-21 12:14 ` ✗ warning: Fi.CI.BAT Patchwork
2015-12-21 12:14 ` Patchwork
2015-12-21 12:20 ` Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450873813.14874.7.camel@sorvi \
--to=mika.kahola@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lukas@wunner.de \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox