From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v4 10/17] drm/i915/gen9: Drop re-allocation of DDB at atomic commit (v2)
Date: Mon, 9 May 2016 18:21:41 -0700 [thread overview]
Message-ID: <1462843308-27639-11-git-send-email-matthew.d.roper@intel.com> (raw)
In-Reply-To: <1462843308-27639-1-git-send-email-matthew.d.roper@intel.com>
Now that we're properly pre-allocating the DDB during the atomic check
phase and we trust that the allocation is appropriate, let's actually
use the allocation computed and not duplicate that work during the
commit phase.
v2:
- Significant rebasing now that we can use cached data rates and
minimum block allocations to avoid grabbing additional plane states.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 14 +--
drivers/gpu/drm/i915/intel_pm.c | 224 +++++++++++------------------------
2 files changed, 67 insertions(+), 171 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c4502fc..6996fe0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13600,6 +13600,7 @@ static int intel_atomic_commit(struct drm_device *dev,
drm_atomic_helper_swap_state(dev, state);
dev_priv->wm.config = intel_state->wm_config;
+ dev_priv->wm.skl_results.ddb = intel_state->ddb;
intel_shared_dpll_commit(state);
if (intel_state->modeset) {
@@ -13724,19 +13725,6 @@ static int intel_atomic_commit(struct drm_device *dev,
intel_modeset_verify_crtc(crtc, old_crtc_state, crtc->state);
}
- /*
- * Temporary sanity check: make sure our pre-computed DDB matches the
- * one we actually wind up programming.
- *
- * Not a great place to put this, but the easiest place we have access
- * to both the pre-computed and final DDB's; we'll be removing this
- * check in the next patch anyway.
- */
- WARN(IS_GEN9(dev) &&
- memcmp(&intel_state->ddb, &dev_priv->wm.skl_results.ddb,
- sizeof(intel_state->ddb)),
- "Pre-computed DDB does not match final DDB!\n");
-
if (intel_state->modeset)
intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ade3ee3..84c837a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2849,7 +2849,6 @@ skl_wm_plane_id(const struct intel_plane *plane)
static void
skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
const struct intel_crtc_state *cstate,
- struct intel_wm_config *config,
struct skl_ddb_entry *alloc, /* out */
int *num_active /* out */)
{
@@ -2857,24 +2856,22 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_crtc *for_crtc = cstate->base.crtc;
- struct drm_crtc *crtc;
unsigned int pipe_size, ddb_size;
int nth_active_pipe;
int pipe = to_intel_crtc(for_crtc)->pipe;
- if (intel_state && intel_state->active_pipe_changes)
- *num_active = hweight32(intel_state->active_crtcs);
- else if (intel_state)
- *num_active = hweight32(dev_priv->active_crtcs);
- else
- *num_active = config->num_pipes_active;
-
- if (!cstate->base.active) {
+ if (WARN_ON(!state) || !cstate->base.active) {
alloc->start = 0;
alloc->end = 0;
+ *num_active = hweight32(dev_priv->active_crtcs);
return;
}
+ if (intel_state->active_pipe_changes)
+ *num_active = hweight32(intel_state->active_crtcs);
+ else
+ *num_active = hweight32(dev_priv->active_crtcs);
+
if (IS_BROXTON(dev))
ddb_size = BXT_DDB_SIZE;
else
@@ -2883,50 +2880,23 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
ddb_size -= 4; /* 4 blocks for bypass path allocation */
/*
- * FIXME: At the moment we may be called on either in-flight or fully
- * committed cstate's. Once we fully move DDB allocation in the check
- * phase, we'll only be called on in-flight states and the 'else'
- * branch here will go away.
- *
- * The 'else' branch is slightly racy here, but it was racy to begin
- * with; since it's going away soon, no effort is made to address that.
+ * If the state doesn't change the active CRTC's, then there's
+ * no need to recalculate; the existing pipe allocation limits
+ * should remain unchanged. Note that we're safe from racing
+ * commits since any racing commit that changes the active CRTC
+ * list would need to grab _all_ crtc locks, including the one
+ * we currently hold.
*/
- if (state) {
- /*
- * If the state doesn't change the active CRTC's, then there's
- * no need to recalculate; the existing pipe allocation limits
- * should remain unchanged. Note that we're safe from racing
- * commits since any racing commit that changes the active CRTC
- * list would need to grab _all_ crtc locks, including the one
- * we currently hold.
- */
- if (!intel_state->active_pipe_changes) {
- *alloc = dev_priv->wm.skl_hw.ddb.pipe[pipe];
- return;
- }
-
- nth_active_pipe = hweight32(intel_state->active_crtcs &
- (drm_crtc_mask(for_crtc) - 1));
- pipe_size = ddb_size / hweight32(intel_state->active_crtcs);
- alloc->start = nth_active_pipe * ddb_size / *num_active;
- alloc->end = alloc->start + pipe_size;
- } else {
- nth_active_pipe = 0;
- for_each_crtc(dev, crtc) {
- if (!to_intel_crtc(crtc)->active)
- continue;
-
- if (crtc == for_crtc)
- break;
-
- nth_active_pipe++;
- }
-
- pipe_size = ddb_size / config->num_pipes_active;
- alloc->start = nth_active_pipe * ddb_size /
- config->num_pipes_active;
- alloc->end = alloc->start + pipe_size;
+ if (!intel_state->active_pipe_changes) {
+ *alloc = dev_priv->wm.skl_hw.ddb.pipe[pipe];
+ return;
}
+
+ nth_active_pipe = hweight32(intel_state->active_crtcs &
+ (drm_crtc_mask(for_crtc) - 1));
+ pipe_size = ddb_size / hweight32(intel_state->active_crtcs);
+ alloc->start = nth_active_pipe * ddb_size / *num_active;
+ alloc->end = alloc->start + pipe_size;
}
static unsigned int skl_cursor_allocation(int num_active)
@@ -3025,62 +2995,33 @@ skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate)
struct drm_crtc *crtc = cstate->crtc;
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ const struct drm_plane *plane;
const struct intel_plane *intel_plane;
+ struct drm_plane_state *pstate;
unsigned int rate, total_data_rate = 0;
int id;
+ int i;
+
+ if (WARN_ON(!state))
+ return 0;
/* Calculate and cache data rate for each plane */
- /*
- * FIXME: At the moment this function can be called on either an
- * in-flight or a committed state object. If it's in-flight then we
- * only want to re-calculate the plane data rate for planes that are
- * part of the transaction (i.e., we don't want to grab any additional
- * plane states if we don't have to). If we're operating on committed
- * state, we'll just go ahead and recalculate the plane data rate for
- * all planes.
- *
- * Once we finish moving our DDB allocation to the atomic check phase,
- * we'll only be calling this function on in-flight state objects, so
- * the 'else' branch here will go away.
- */
- if (state) {
- struct drm_plane *plane;
- struct drm_plane_state *pstate;
- int i;
-
- for_each_plane_in_state(state, plane, pstate, i) {
- intel_plane = to_intel_plane(plane);
- id = skl_wm_plane_id(intel_plane);
-
- if (intel_plane->pipe != intel_crtc->pipe)
- continue;
-
- /* packed/uv */
- rate = skl_plane_relative_data_rate(intel_cstate,
- pstate, 0);
- intel_cstate->wm.skl.plane_data_rate[id] = rate;
-
- /* y-plane */
- rate = skl_plane_relative_data_rate(intel_cstate,
- pstate, 1);
- intel_cstate->wm.skl.plane_y_data_rate[id] = rate;
- }
- } else {
- for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
- const struct drm_plane_state *pstate =
- intel_plane->base.state;
- int id = skl_wm_plane_id(intel_plane);
+ for_each_plane_in_state(state, plane, pstate, i) {
+ id = skl_wm_plane_id(to_intel_plane(plane));
+ intel_plane = to_intel_plane(plane);
- /* packed/uv */
- rate = skl_plane_relative_data_rate(intel_cstate,
- pstate, 0);
- intel_cstate->wm.skl.plane_data_rate[id] = rate;
+ if (intel_plane->pipe != intel_crtc->pipe)
+ continue;
- /* y-plane */
- rate = skl_plane_relative_data_rate(intel_cstate,
- pstate, 1);
- intel_cstate->wm.skl.plane_y_data_rate[id] = rate;
- }
+ /* packed/uv */
+ rate = skl_plane_relative_data_rate(intel_cstate,
+ pstate, 0);
+ intel_cstate->wm.skl.plane_data_rate[id] = rate;
+
+ /* y-plane */
+ rate = skl_plane_relative_data_rate(intel_cstate,
+ pstate, 1);
+ intel_cstate->wm.skl.plane_y_data_rate[id] = rate;
}
/* Calculate CRTC's total data rate from cached values */
@@ -3104,8 +3045,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
struct drm_atomic_state *state = cstate->base.state;
struct drm_crtc *crtc = cstate->base.crtc;
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_wm_config *config = &dev_priv->wm.config;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane;
struct drm_plane *plane;
@@ -3119,6 +3058,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
int num_active;
int id, i;
+ if (WARN_ON(!state))
+ return 0;
+
if (!cstate->base.active) {
ddb->pipe[pipe].start = ddb->pipe[pipe].end = 0;
memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe]));
@@ -3126,8 +3068,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
return 0;
}
- skl_ddb_get_pipe_allocation_limits(dev, cstate, config, alloc,
- &num_active);
+ skl_ddb_get_pipe_allocation_limits(dev, cstate, alloc, &num_active);
alloc_size = skl_ddb_entry_size(alloc);
if (alloc_size == 0) {
memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe]));
@@ -3139,53 +3080,31 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
ddb->plane[pipe][PLANE_CURSOR].end = alloc->end;
alloc_size -= cursor_blocks;
- alloc->end -= cursor_blocks;
/* 1. Allocate the mininum required blocks for each active plane */
- /*
- * TODO: Remove support for already-committed state once we
- * only allocate DDB on in-flight states.
- */
- if (state) {
- for_each_plane_in_state(state, plane, pstate, i) {
- intel_plane = to_intel_plane(plane);
- id = skl_wm_plane_id(intel_plane);
-
- if (intel_plane->pipe != pipe)
- continue;
-
- if (!to_intel_plane_state(pstate)->visible) {
- minimum[id] = 0;
- y_minimum[id] = 0;
- continue;
- }
- if (plane->type == DRM_PLANE_TYPE_CURSOR) {
- minimum[id] = 0;
- y_minimum[id] = 0;
- continue;
- }
-
- minimum[id] = 8;
- if (pstate->fb->pixel_format == DRM_FORMAT_NV12)
- y_minimum[id] = 8;
- else
- y_minimum[id] = 0;
- }
- } else {
- for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
- struct drm_plane *plane = &intel_plane->base;
- struct drm_framebuffer *fb = plane->state->fb;
- int id = skl_wm_plane_id(intel_plane);
-
- if (!to_intel_plane_state(plane->state)->visible)
- continue;
+ for_each_plane_in_state(state, plane, pstate, i) {
+ intel_plane = to_intel_plane(plane);
+ id = skl_wm_plane_id(intel_plane);
- if (plane->type == DRM_PLANE_TYPE_CURSOR)
- continue;
+ if (intel_plane->pipe != pipe)
+ continue;
- minimum[id] = 8;
- y_minimum[id] = (fb->pixel_format == DRM_FORMAT_NV12) ? 8 : 0;
+ if (!to_intel_plane_state(pstate)->visible) {
+ minimum[id] = 0;
+ y_minimum[id] = 0;
+ continue;
+ }
+ if (plane->type == DRM_PLANE_TYPE_CURSOR) {
+ minimum[id] = 0;
+ y_minimum[id] = 0;
+ continue;
}
+
+ minimum[id] = 8;
+ if (pstate->fb->pixel_format == DRM_FORMAT_NV12)
+ y_minimum[id] = 8;
+ else
+ y_minimum[id] = 0;
}
for (i = 0; i < PLANE_CURSOR; i++) {
@@ -3736,7 +3655,6 @@ static bool skl_update_pipe_wm(struct drm_crtc *crtc,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
- WARN_ON(skl_allocate_pipe_ddb(cstate, ddb) != 0);
skl_build_pipe_wm(cstate, ddb, pipe_wm);
if (!memcmp(&intel_crtc->wm.active.skl, pipe_wm, sizeof(*pipe_wm)))
@@ -3800,16 +3718,6 @@ static void skl_clear_wm(struct skl_wm_values *watermarks, enum pipe pipe)
memset(watermarks->plane_trans[pipe],
0, sizeof(uint32_t) * I915_MAX_PLANES);
watermarks->plane_trans[pipe][PLANE_CURSOR] = 0;
-
- /* Clear ddb entries for pipe */
- memset(&watermarks->ddb.pipe[pipe], 0, sizeof(struct skl_ddb_entry));
- memset(&watermarks->ddb.plane[pipe], 0,
- sizeof(struct skl_ddb_entry) * I915_MAX_PLANES);
- memset(&watermarks->ddb.y_plane[pipe], 0,
- sizeof(struct skl_ddb_entry) * I915_MAX_PLANES);
- memset(&watermarks->ddb.plane[pipe][PLANE_CURSOR], 0,
- sizeof(struct skl_ddb_entry));
-
}
static int
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-05-10 1:24 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-10 1:21 [PATCH v4 00/17] Pre-calculate SKL-style atomicwatermarks Matt Roper
2016-05-10 1:21 ` [PATCH v4 01/17] drm/i915: Reorganize WM structs/unions in CRTC state Matt Roper
2016-05-10 1:21 ` [PATCH v4 02/17] drm/i915: Rename s/skl_compute_pipe_wm/skl_build_pipe_wm/ Matt Roper
2016-05-10 1:21 ` [PATCH v4 03/17] drm/i915/gen9: Cache plane data rates in CRTC state Matt Roper
2016-05-10 1:21 ` [PATCH v4 04/17] drm/i915/gen9: Allow calculation of data rate for in-flight state (v2) Matt Roper
2016-05-10 1:21 ` [PATCH v4 05/17] drm/i915/gen9: Store plane minimum blocks in CRTC wm " Matt Roper
2016-05-10 1:21 ` [PATCH v4 06/17] drm/i915: Track whether an atomic transaction changes the active CRTC's Matt Roper
2016-05-10 1:21 ` [PATCH v4 07/17] drm/i915/gen9: Allow skl_allocate_pipe_ddb() to operate on in-flight state (v3) Matt Roper
2016-05-10 1:21 ` [PATCH v4 08/17] drm/i915: Add distrust_bios_wm flag to dev_priv Matt Roper
2016-05-11 10:38 ` Maarten Lankhorst
2016-05-11 15:48 ` Matt Roper
2016-05-11 16:02 ` [PATCH v4 08/17] drm/i915: Add distrust_bios_wm flag to dev_priv (v2) Matt Roper
2016-05-12 10:09 ` Maarten Lankhorst
2016-05-10 1:21 ` [PATCH v4 09/17] drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Matt Roper
2016-05-10 1:21 ` Matt Roper [this message]
2016-05-10 1:21 ` [PATCH v4 11/17] drm/i915/gen9: Calculate plane WM's from state Matt Roper
2016-05-10 1:21 ` [PATCH v4 12/17] drm/i915/gen9: Allow watermark calculation on in-flight atomic state (v3) Matt Roper
2016-05-10 1:21 ` [PATCH v4 13/17] drm/i915/gen9: Use a bitmask to track dirty pipe watermarks Matt Roper
2016-05-10 1:21 ` [PATCH v4 14/17] drm/i915/gen9: Propagate watermark calculation failures up the call chain Matt Roper
2016-05-10 1:21 ` [PATCH v4 15/17] drm/i915/gen9: Calculate watermarks during atomic 'check' Matt Roper
2016-05-10 1:21 ` [PATCH v4 16/17] drm/i915/gen9: Reject display updates that exceed wm limitations (v2) Matt Roper
2016-05-10 1:21 ` [PATCH v4 17/17] drm/i915: Remove wm_config from dev_priv/intel_atomic_state Matt Roper
2016-05-11 16:30 ` ✗ Ro.CI.BAT: failure for Pre-calculate SKL-style atomicwatermarks (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462843308-27639-11-git-send-email-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox