From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>,
Daniel Vetter <daniel.vetter@intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH 5/6] drm/i915/cnp: add CNP gmbus support
Date: Tue, 30 May 2017 15:11:07 -0700 [thread overview]
Message-ID: <1496182268-23560-5-git-send-email-rodrigo.vivi@intel.com> (raw)
In-Reply-To: <1496182268-23560-1-git-send-email-rodrigo.vivi@intel.com>
On CNP PCH based platforms the gmbus is on the south display that
is on PCH. The existing implementation for previous platforms
already covers the need for CNP expect for the pin pair configuration
that follows similar definitions that we had on BXT.
v2: Don't drop "_BXT" as the indicator of the first platform
supporting this pin numbers. Suggested by Daniel.
v3: Add missing else and fix register table since CNP GPIO_CTL
starts on 0xC5014.
v4: Fix pin number and map according to the current available VBT.
Re-add pin 4 for port D. Lost during some rebase.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 3 ++-
drivers/gpu/drm/i915/intel_hdmi.c | 8 +++++---
drivers/gpu/drm/i915/intel_i2c.c | 20 ++++++++++++++++++--
3 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index cb83fb7..1329420 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2626,9 +2626,10 @@ enum skl_disp_power_wells {
#define GMBUS_PIN_DPB 5 /* SDVO, HDMIB */
#define GMBUS_PIN_DPD 6 /* HDMID */
#define GMBUS_PIN_RESERVED 7 /* 7 reserved */
-#define GMBUS_PIN_1_BXT 1
+#define GMBUS_PIN_1_BXT 1 /* BXT+ (atom) and CNP+ (big core) */
#define GMBUS_PIN_2_BXT 2
#define GMBUS_PIN_3_BXT 3
+#define GMBUS_PIN_4_CNP 4
#define GMBUS_NUM_PINS 7 /* including 0 */
#define GMBUS1 _MMIO(dev_priv->gpio_mmio_base + 0x5104) /* command/status */
#define GMBUS_SW_CLR_INT (1<<31)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 41267ff..ec0779a 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1802,19 +1802,21 @@ static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv,
switch (port) {
case PORT_B:
- if (IS_GEN9_LP(dev_priv))
+ if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
ddc_pin = GMBUS_PIN_1_BXT;
else
ddc_pin = GMBUS_PIN_DPB;
break;
case PORT_C:
- if (IS_GEN9_LP(dev_priv))
+ if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
ddc_pin = GMBUS_PIN_2_BXT;
else
ddc_pin = GMBUS_PIN_DPC;
break;
case PORT_D:
- if (IS_CHERRYVIEW(dev_priv))
+ if (HAS_PCH_CNP(dev_priv))
+ ddc_pin = GMBUS_PIN_4_CNP;
+ else if (IS_CHERRYVIEW(dev_priv))
ddc_pin = GMBUS_PIN_DPD_CHV;
else
ddc_pin = GMBUS_PIN_DPD;
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index b6401e8..3eb4a91 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -68,11 +68,25 @@ struct gmbus_pin {
[GMBUS_PIN_3_BXT] = { "misc", GPIOD },
};
+/*
+ * FIXME: Spec maps 3-misc-0xc541c and 4-portd-0xc5420.
+ * However, current available pre-prod VBT maps:
+ * portD to pin 3 using 0xc5420.
+ */
+static const struct gmbus_pin gmbus_pins_cnp[] = {
+ [GMBUS_PIN_1_BXT] = { "dpb", GPIOB },
+ [GMBUS_PIN_2_BXT] = { "dpc", GPIOC },
+ [GMBUS_PIN_3_BXT] = { "misc", GPIOE },
+ [GMBUS_PIN_4_CNP] = { "dpd", GPIOD },
+};
+
/* pin is expected to be valid */
static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv,
unsigned int pin)
{
- if (IS_GEN9_LP(dev_priv))
+ if (HAS_PCH_CNP(dev_priv))
+ return &gmbus_pins_cnp[pin];
+ else if (IS_GEN9_LP(dev_priv))
return &gmbus_pins_bxt[pin];
else if (IS_GEN9_BC(dev_priv))
return &gmbus_pins_skl[pin];
@@ -87,7 +101,9 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
{
unsigned int size;
- if (IS_GEN9_LP(dev_priv))
+ if (HAS_PCH_CNP(dev_priv))
+ size = ARRAY_SIZE(gmbus_pins_cnp);
+ else if (IS_GEN9_LP(dev_priv))
size = ARRAY_SIZE(gmbus_pins_bxt);
else if (IS_GEN9_BC(dev_priv))
size = ARRAY_SIZE(gmbus_pins_skl);
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-05-30 22:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-30 22:11 [PATCH 1/6] drm/i915/cnp: Introduce Cannonpoint PCH Rodrigo Vivi
2017-05-30 22:11 ` [PATCH 2/6] drm/i915/cnp: Add PCI ID for Cannonpoint LP PCH Rodrigo Vivi
2017-05-30 22:11 ` [PATCH 3/6] drm/i915/cnp: Get/set proper Raw clock frequency on CNP Rodrigo Vivi
2017-05-30 22:11 ` [PATCH 4/6] drm/i915/cnp: Backlight support for CNP Rodrigo Vivi
2017-05-30 22:11 ` Rodrigo Vivi [this message]
2017-05-30 22:11 ` [PATCH 6/6] drm/i915/cnp: Panel Power sequence changes for CNP PCH Rodrigo Vivi
2017-05-30 22:27 ` ✓ Fi.CI.BAT: success for series starting with [1/6] drm/i915/cnp: Introduce Cannonpoint PCH Patchwork
-- strict thread matches above, loose matches on Subject: below --
2017-06-02 20:06 [PATCH 1/6] " Rodrigo Vivi
2017-06-02 20:06 ` [PATCH 5/6] drm/i915/cnp: add CNP gmbus support Rodrigo Vivi
2017-06-01 22:33 [PATCH 1/6] drm/i915/cnp: Introduce Cannonpoint PCH Rodrigo Vivi
2017-06-01 22:33 ` [PATCH 5/6] drm/i915/cnp: add CNP gmbus support Rodrigo Vivi
2017-06-01 0:23 [PATCH 1/6] drm/i915/cnp: Introduce Cannonpoint PCH Rodrigo Vivi
2017-06-01 0:23 ` [PATCH 5/6] drm/i915/cnp: add CNP gmbus support Rodrigo Vivi
2017-05-30 21:53 [PATCH 1/6] drm/i915/cnp: Introduce Cannonpoint PCH Rodrigo Vivi
2017-05-30 21:53 ` [PATCH 5/6] drm/i915/cnp: add CNP gmbus support Rodrigo Vivi
2017-05-09 19:16 [PATCH 0/6] Cannonpoint Enabling Patches Anusha Srivatsa
2017-05-09 19:16 ` [PATCH 5/6] drm/i915/cnp: add CNP gmbus support Anusha Srivatsa
2017-05-23 19:26 ` Vivi, Rodrigo
2017-05-08 23:44 [PATCH 0/6] Cannonpoint Enabling Patches Anusha Srivatsa
2017-05-08 23:45 ` [PATCH 5/6] drm/i915/cnp: add CNP gmbus support Anusha Srivatsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496182268-23560-5-git-send-email-rodrigo.vivi@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).