Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ramalingam C <ramalingam.c@intel.com>
To: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	daniel.vetter@intel.com
Subject: [RFC v1 15/20] drm/hdcp2.2: Display driver service functions
Date: Wed, 12 Jul 2017 13:58:59 +0530	[thread overview]
Message-ID: <1499848144-8456-16-git-send-email-ramalingam.c@intel.com> (raw)
In-Reply-To: <1499848144-8456-1-git-send-email-ramalingam.c@intel.com>

DRM HDCP2.2 service function interface is defiend.
This will be initialized from display driver.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
---
 include/drm/drm_hdcp.h | 207 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 207 insertions(+)

diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
index 1f9a04d..94acd8d 100644
--- a/include/drm/drm_hdcp.h
+++ b/include/drm/drm_hdcp.h
@@ -30,6 +30,18 @@
 struct drm_connector;
 struct drm_hdcp;
 
+struct wired_ake_init;
+struct wired_ake_send_cert;
+struct wired_ake_no_stored_km;
+struct wired_ake_send_hprime;
+struct wired_ake_send_pairing_info;
+struct wired_lc_init;
+struct wired_lc_send_lprime;
+struct wired_ske_send_eks;
+struct wired_rep_send_receiverid_list;
+struct wired_rep_send_ack;
+struct wired_rep_stream_ready;
+
 /**
  * HDCP Software stack specific
  */
@@ -71,6 +83,200 @@ enum wired_protocol {
 	WIRED_PROTOCOL_DP
 };
 
+struct drm_hdcp2_funcs {
+
+	/* Authencation and Key Exchange related */
+	/**
+	 * @prepare_ake_init:
+	 *
+	 * Function to prepare the complete ake_init message and
+	 * pass it onto DRM.
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*prepare_ake_init)(struct drm_hdcp *hdcp,
+			struct wired_ake_init *ake_data, size_t buf_sz,
+			size_t *msg_sz);
+
+	/**
+	 * @verify_rx_cert:
+	 *
+	 * Service Function for verifying the DCP signature of rx
+	 * certificate received from HDCP sink and prepare the msg with km as
+	 * AKE_No_Stored_km or AKE_Stored_km.
+	 *
+	 *	Involves:
+	 *	  DCP signature verification.
+	 *	  Receiver ID check against the SRM table's revocation list.
+	 *	  For Non-Paired receiver
+	 *	    Generate a pseudo-random 128-bit Master Key Km
+	 *	    Encrypt km with kpub_rx
+	 *	    Form AKE_No_Stored_km msg
+	 *	  For Paired Device
+	 *	    Forms AKE_Stored_km with stored Ekh(km) and m
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*verify_rx_cert_prepare_km)(struct drm_hdcp *hdcp,
+			struct wired_ake_send_cert *rx_cert,
+			size_t rx_cert_sz, bool *paired,
+			struct wired_ake_no_stored_km *ek_pub_km,
+			size_t buf_sz, size_t *msg_sz);
+
+	/**
+	 * @verify_hprime:
+	 *
+	 * Service Function for verifying the hprime received from receiver.
+	 *	Involves:
+	 *	  Prepare hprime and compare with received hprime
+	 *		hprime = HMAC_SHA256(r_tx || RxCaps || TxCaps, kd)
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*verify_hprime)(struct drm_hdcp *hdcp,
+			struct wired_ake_send_hprime *rx_hprime,
+			size_t hprime_sz);
+
+	/**
+	 * @store_paring_info:
+	 *
+	 * Service Function to store the Ekh(km) along with m in
+	 * non-volatile memory. This is just to fast track the authentication
+	 * of same receiver from next time onwards.
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*store_paring_info)(struct drm_hdcp *hdcp,
+			struct wired_ake_send_pairing_info *pairing_info,
+			size_t pairing_info_sz);
+
+	/* Locality check related services */
+	/**
+	 * @prepare_lc_init:
+	 *
+	 * Service Function to prepare LC_INIT
+	 *	Involves:
+	 *	  Generation of 64bit pseudo aandom nonce rn
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*prepare_lc_init)(struct drm_hdcp *hdcp,
+			struct wired_lc_init *lc_init_data, size_t buf_sz,
+			size_t *msg_sz);
+
+	/**
+	 * @verify_lprime:
+	 *
+	 * Service Function to verify the lprime received from receiver
+	 *	Involves
+	 *	  Calculate L = HMAC-SHA256(rn, kd XOR rrx)
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*verify_lprime)(struct drm_hdcp *hdcp,
+			struct wired_lc_send_lprime *rx_lprime,
+			size_t lprime_sz);
+
+	/* SKE related services */
+	/**
+	 * @prepare_skey:
+	 *
+	 * Service Function to prepare SKE_Send_Eks msg
+	 *	Involves
+	 *	  Generation of Edkey(ks) and riv
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*prepare_skey)(struct drm_hdcp *hdcp,
+			struct wired_ske_send_eks *ske_data,
+			size_t buf_sz, size_t *msg_sz);
+
+	/* Repeater Support services */
+	/**
+	 * @verify_rep_topology:
+	 *
+	 * Service Function to validate the downstream topology and to prepare
+	 * repeater_auth_ack message.
+	 *	Involves
+	 *	  Validate the devcie count and Depth
+	 *	  Look out for HDCP1.x devices or HDCP2.0 devices
+	 *	  Check receiver ID list against revocation list
+	 *	  Check for roll over of seq_num_V
+	 *	  validate the vprime with Most Significant 128bits of V
+	 *	  V’ = HMAC-SHA256(ReceiverID list || RxInfo || seq_num_V, kd)
+	 *	  Least Significant 128bits of V is formed as ack msg.
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*verify_rep_topology_prepare_ack)(
+			struct drm_hdcp *hdcp,
+			struct wired_rep_send_receiverid_list *rep_topology,
+			size_t receiverid_list_sz,
+			struct wired_rep_send_ack *rep_send_ack, size_t buf_sz,
+			size_t *msg_sz);
+
+	/**
+	 * @verify_mprime:
+	 *
+	 * Service Function to verify the MPrime received
+	 *	M’(or M) = HMAC-SHA256(StreamID_Type || seq_num_M, SHA256(kd))
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*verify_mprime)(struct drm_hdcp *hdcp,
+			struct wired_rep_stream_ready *stream_ready,
+			size_t stream_ready_sz);
+
+	/**
+	 * @authenticate:
+	 *
+	 * Service Function to configure HW as Authenticated
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*authenticate)(struct drm_hdcp *hdcp);
+
+	/**
+	 * @deauthenticate:
+	 *
+	 * Service Function to configure HW as deauthenticated
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*deauthenticate)(struct drm_hdcp *hdcp);
+
+	/**
+	 * @enable_encryption:
+	 *
+	 * Service Function to enable encryption at platform level.
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*enable_encryption)(struct drm_hdcp *hdcp);
+
+	/**
+	 * @disable_encryption:
+	 *
+	 * Service function to disable encryption at platform level.
+	 *
+	 * returns HDCP_STATUS_SUCCESS on success
+	 *		else non-zero HDCP error states
+	 **/
+	enum hdcp_status (*disable_encryption)(struct drm_hdcp *hdcp);
+};
+
 struct drm_hdcp_funcs {
 
 	/**
@@ -125,6 +331,7 @@ struct drm_hdcp {
 	enum wired_protocol protocol;
 
 	const struct drm_hdcp_funcs *hdcp_funcs;
+	const struct drm_hdcp2_funcs *hdcp2_funcs;
 
 	struct mutex mutex;
 };
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-07-12  8:28 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-12  8:28 [RFC v1 00/20] DRM Interfaces for HDCP support Ramalingam C
2017-07-12  8:28 ` [RFC v1 01/20] drm/hdcp: HDCP bitmask property for connectors Ramalingam C
2017-07-12  9:54   ` Daniel Vetter
2017-07-12 14:56     ` [Intel-gfx] " Ramalingam C
2017-07-12 19:10       ` Sean Paul
2017-07-13  6:09         ` Daniel Vetter
2017-07-13  6:54           ` Ramalingam C
2017-07-13  8:45             ` Daniel Vetter
2017-07-13 10:15               ` [Intel-gfx] " Ramalingam C
2017-07-13 10:36                 ` Daniel Vetter
2017-07-13 12:59                   ` Ramalingam C
2017-07-13 19:02                     ` [Intel-gfx] " Daniel Vetter
2017-07-14 10:40                       ` Ramalingam C
2017-07-14 11:21                         ` [RFC v2] drm/hdcp: drm enum property for HDCP State Ramalingam C
2017-07-14 13:55                           ` Sean Paul
2017-07-21 13:02                             ` Ramalingam C
2017-07-24 13:23                               ` Sean Paul
2017-07-24 13:34                                 ` Ramalingam C
2017-07-24 18:12                                 ` [RFC v3] drm/hdcp: drm enum property for CP State Ramalingam C
2017-07-25 12:34                                   ` Sean Paul
2017-07-26  9:54                                     ` Ramalingam C
2017-07-26 14:52                                       ` Sean Paul
2017-07-26 16:51                                         ` C, Ramalingam
2017-07-26 17:54                                           ` Sean Paul
2017-08-02 15:32                                             ` Ramalingam C
2017-08-02 15:53                                               ` [RFC v4] " Ramalingam C
2017-08-05 15:51                                                 ` Ramalingam C
2017-08-07  5:32                                                   ` Ramalingam C
2017-07-13  6:36         ` [Intel-gfx] [RFC v1 01/20] drm/hdcp: HDCP bitmask property for connectors Ramalingam C
2017-07-12  8:28 ` [RFC v1 02/20] drm/hdcp: HDCP SRM blob " Ramalingam C
2017-07-12  8:28 ` [RFC v1 03/20] drm/sysfs: Generate drm uevent with custom string Ramalingam C
2017-07-12  8:28 ` [RFC v1 04/20] drm/hdcp: Struct drm_hdcp for connector's hdcp state Ramalingam C
2017-07-12  8:28 ` [RFC v1 05/20] drm/hdcp: HDCP status code for DRM HDCP stack Ramalingam C
2017-07-12  8:28 ` [RFC v1 06/20] drm/hdcp: display driver callback funcs defined Ramalingam C
2017-07-12  8:28 ` [RFC v1 07/20] drm/hdcp: Initialization of DRM hdcp stack Ramalingam C
2017-07-12  8:28 ` [RFC v1 08/20] drm/hdcp: Add KBuild for DRM HDCP support Ramalingam C
2017-07-12  8:28 ` [RFC v1 09/20] drm/hdcp: Generic enable, disable and late_init Ramalingam C
2017-07-12  8:28 ` [RFC v1 10/20] drm/hdcp: Handler for connector state change Ramalingam C
2017-07-12  8:28 ` [RFC v1 11/20] drm/hdcp: Registering " Ramalingam C
2017-07-12  8:28 ` [RFC v1 12/20] drm/hdcp: Atomic set and get property for hdcp Ramalingam C
2017-07-12  8:28 ` [RFC v1 13/20] drm/hdcp: Updating DRM Property val with HDCP state Ramalingam C
2017-07-12  8:28 ` [RFC v1 14/20] drm/hdcp2.2: HDCP2.2 protocol msg definitions Ramalingam C
2017-07-12  8:28 ` Ramalingam C [this message]
2017-07-12  8:29 ` [RFC v1 16/20] drm/hdcp2.2: HDCP2.2 Initialization Ramalingam C
2017-07-12  8:29 ` [RFC v1 17/20] drm/hdcp2.2: Definitions of HDMI HDCP2.2 registers Ramalingam C
2017-07-12  8:29 ` [RFC v1 18/20] drm/hdcp2.2: Late_init: Capability probing on panel Ramalingam C
2017-07-12  8:29 ` [RFC v1 19/20] drm/hdcp2.2: HDCP2.2 enable as a asynchronous work Ramalingam C
2017-07-12  8:29 ` [RFC v1 20/20] drm/hdcp2.2: HDCP2.2 disable " Ramalingam C
2017-07-12  8:35 ` ✗ Fi.CI.BAT: failure for DRM Interfaces for HDCP support Patchwork
2017-07-14 11:26 ` ✗ Fi.CI.BAT: failure for DRM Interfaces for HDCP support (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499848144-8456-16-git-send-email-ramalingam.c@intel.com \
    --to=ramalingam.c@intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox