Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: John Spotswood <john.a.spotswood@intel.com>
To: Oscar Mateo <oscar.mateo@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 4/5] drm/i915/icl/huc: Correctly authenticate the HuC for Icelake
Date: Tue, 08 May 2018 16:22:54 -0700	[thread overview]
Message-ID: <1525821774.3618.17.camel@intel.com> (raw)
In-Reply-To: <1525287804-2071-5-git-send-email-oscar.mateo@intel.com>

On Wed, 2018-05-02 at 12:03 -0700, Oscar Mateo wrote:
> The register to check for correct HuC authentication by the GuC
> has changed in Icelake. Look into the right register & bit.
> 
> v2: rebased.
> v3: rebased.
> v4: Fix I915_PARAM_HUC_STATUS as well (Tony)
> v5: Fix duplicate Cc
> 
> BSpec: 19686
> 
> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
> Cc: Tony Ye <tony.ye@intel.com>
> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
> Cc: Michel Thierry <michel.thierry@intel.com>
> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
> Cc: John Spotswood <john.a.spotswood@intel.com>

Reviewed-by: John Spotswood <john.a.spotswood@intel.com>

> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_guc_reg.h |  3 +++
>  drivers/gpu/drm/i915/intel_huc.c     | 23 +++++++++++++++++++----
>  2 files changed, 22 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_guc_reg.h
> b/drivers/gpu/drm/i915/intel_guc_reg.h
> index d860847..9f14f9f 100644
> --- a/drivers/gpu/drm/i915/intel_guc_reg.h
> +++ b/drivers/gpu/drm/i915/intel_guc_reg.h
> @@ -76,6 +76,9 @@
>  #define HUC_STATUS2             _MMIO(0xD3B0)
>  #define   HUC_FW_VERIFIED       (1<<7)
>  
> +#define HUC_KERNEL_LOAD_INFO	_MMIO(0xC1DC)
> +#define   HUC_LOAD_SUCCESSFUL	(1 << 0)
> +
>  #define GUC_WOPCM_SIZE			_MMIO(0xc050)
>  #define   GUC_WOPCM_SIZE_LOCKED		  (1<<0)
>  #define   GUC_WOPCM_SIZE_SHIFT		12
> diff --git a/drivers/gpu/drm/i915/intel_huc.c
> b/drivers/gpu/drm/i915/intel_huc.c
> index 2912852..b509756 100644
> --- a/drivers/gpu/drm/i915/intel_huc.c
> +++ b/drivers/gpu/drm/i915/intel_huc.c
> @@ -48,9 +48,19 @@ int intel_huc_auth(struct intel_huc *huc)
>  	struct drm_i915_private *i915 = huc_to_i915(huc);
>  	struct intel_guc *guc = &i915->guc;
>  	struct i915_vma *vma;
> +	i915_reg_t status_reg;
>  	u32 status;
> +	u32 status_ok;
>  	int ret;
>  
> +	if (INTEL_GEN(i915) >= 11) {
> +		status_reg = HUC_KERNEL_LOAD_INFO;
> +		status_ok = HUC_LOAD_SUCCESSFUL;
> +	} else {
> +		status_reg = HUC_STATUS2;
> +		status_ok = HUC_FW_VERIFIED;
> +	}
> +
>  	if (huc->fw.load_status != INTEL_UC_FIRMWARE_SUCCESS)
>  		return -ENOEXEC;
>  
> @@ -72,9 +82,9 @@ int intel_huc_auth(struct intel_huc *huc)
>  
>  	/* Check authentication status, it should be done by now */
>  	ret = __intel_wait_for_register(i915,
> -					HUC_STATUS2,
> -					HUC_FW_VERIFIED,
> -					HUC_FW_VERIFIED,
> +					status_reg,
> +					status_ok,
> +					status_ok,
>  					2, 50, &status);
>  	if (ret) {
>  		DRM_ERROR("HuC: Firmware not verified %#x\n",
> status);
> @@ -112,7 +122,12 @@ int intel_huc_check_status(struct intel_huc
> *huc)
>  		return -ENODEV;
>  
>  	intel_runtime_pm_get(dev_priv);
> -	status = I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED;
> +
> +	if (INTEL_GEN(dev_priv) >= 11)
> +		status = I915_READ(HUC_KERNEL_LOAD_INFO) &
> HUC_LOAD_SUCCESSFUL;
> +	else
> +		status = I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED;
> +
>  	intel_runtime_pm_put(dev_priv);
>  
>  	return status;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-05-08 23:22 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-02 19:03 [PATCH v2 0/8] Enable HuC authentication in Icelake Oscar Mateo
2018-05-02 19:03 ` [PATCH 1/5] drm/i915/icl/guc: Do not allow GuC submission on Icelake for now Oscar Mateo
2018-05-08 23:21   ` John Spotswood
2018-05-02 19:03 ` [PATCH 2/5] drm/i915/icl/guc: Pass the bare minimum GuC init parameters for Icelake Oscar Mateo
2018-05-08 23:22   ` John Spotswood
2018-05-02 19:03 ` [PATCH 3/5] drm/i915/icl/guc: Define the GuC firmware version " Oscar Mateo
2018-05-08 23:22   ` John Spotswood
2018-05-02 19:03 ` [PATCH 4/5] drm/i915/icl/huc: Correctly authenticate the HuC " Oscar Mateo
2018-05-04 22:26   ` John Spotswood
2018-05-08 21:36     ` Oscar Mateo
2018-05-08 23:22   ` John Spotswood [this message]
2018-05-02 19:03 ` [PATCH 5/5] drm/i915/icl/huc: Define the HuC firmware version " Oscar Mateo
2018-05-08 23:23   ` John Spotswood
2018-05-02 19:34 ` ✓ Fi.CI.BAT: success for Enable HuC authentication in Icelake (rev2) Patchwork
2018-05-02 19:44 ` [PATCH v2 0/8] Enable HuC authentication in Icelake Oscar Mateo Lozano
2018-05-03  2:13 ` ✗ Fi.CI.IGT: failure for Enable HuC authentication in Icelake (rev2) Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2018-04-27 21:31 [PATCH 0/5] Enable HuC authentication in Icelake Oscar Mateo
2018-04-27 21:31 ` [PATCH 4/5] drm/i915/icl/huc: Correctly authenticate the HuC for Icelake Oscar Mateo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525821774.3618.17.camel@intel.com \
    --to=john.a.spotswood@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=oscar.mateo@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox