From: Ramalingam C <ramalingam.c@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
daniel@ffwll.ch, seanpaul@chromium.org, tomas.winkler@intel.com,
alexander.usyskin@intel.com, uma.shankar@intel.com
Subject: [PATCH v6 00/35] drm/i915: Implement HDCP2.2
Date: Sat, 14 Jul 2018 08:44:42 +0530 [thread overview]
Message-ID: <1531538117-1606-1-git-send-email-ramalingam.c@intel.com> (raw)
The sequence for HDCP2.2 authentication and encryption is implemented
in I915. Encoder specific implementations are moved into hdcp_shim.
Intel HWs supports HDCP2.2 through ME FW. Hence this series
introduces a client driver for mei bus, so that for HDCP2.2
authentication, HDCP2.2 stack in I915 can avail the services from
ME FW.
DRM_I915 selects INTEL_MEI_HDCP, which selects INTEL_MEI_ME and
INTEL_MEI. If we are interested in disabling the MEI_HDCP and MEI Bus
then we need an option to disable the HDCP2.2 in I915
(like DRM_I915_HDCP2.2!?). Till then they are binded.
Userspace interface remains unchanged as version agnostic. When
userspace request for HDCP enable, Kernel will detect the HDCP source
and sink's HDCP version(1.4/2.2)capability and enable the best capable
version for that combination.
This series enables the HDCP2.2 for Type0 content streams.
Thanks a lot for Daniel Vetter and Sean Paul for reviewing v5.
Major Changes in v6:
- Component master is added in I915_load [Daniel].
- I915 load will wait until all associated components are loaded.
[Daniel]
- Many review comments from Sean Paul and Daniel Vetter are addressed.
- Few patches are merged together. [Sean Paul]
- Gmbus changes for burst read is already merged.
Complete series is hosted at
https://github.com/ramalingampc2008/drm-tip.git hdcp2_2_v6
Ramalingam C (34):
drm: hdcp2.2 authentication msg definitions
drm: HDMI and DP specific HDCP2.2 defines
linux/mei: Header for mei_hdcp driver interface
drm/i915: wrapping all hdcp var into intel_hdcp
drm/i915: Define Intel HDCP2.2 registers
component: alloc component_match without any comp to match
drm/i915: component master at i915 driver load
drm/i915: Initialize HDCP2.2 and its MEI interface
drm/i915: Pullout the bksv read and validation
drm/i915: Enable and Disable of HDCP2.2
drm/i915: Implement HDCP2.2 receiver authentication
drm/i915: Implement HDCP2.2 repeater authentication
drm/i915: Implement HDCP2.2 link integrity check
drm/i915: Handle HDCP2.2 downstream topology change
drm/i915: hdcp_check_link only on CP_IRQ
drm/i915: Check HDCP 1.4 and 2.2 link on CP_IRQ
drm/i915: Implement the HDCP2.2 support for DP
drm/i915: Implement the HDCP2.2 support for HDMI
drm/i915: Add HDCP2.2 support for DP connectors
drm/i915: Add HDCP2.2 support for HDMI connectors
misc/mei/hdcp: Client driver for HDCP application
misc/mei/hdcp: Component framework for I915 Interface
misc/mei/hdcp: Define ME FW interface for HDCP2.2
misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session
misc/mei/hdcp: Verify Receiver Cert and prepare km
misc/mei/hdcp: Verify H_prime
misc/mei/hdcp: Store the HDCP Pairing info
misc/mei/hdcp: Initiate Locality check
misc/mei/hdcp: Verify L_prime
misc/mei/hdcp: Prepare Session Key
misc/mei/hdcp: Repeater topology verification and ack
misc/mei/hdcp: Verify M_prime
misc/mei/hdcp: Enabling the HDCP authentication
misc/mei/hdcp: Closing wired HDCP2.2 Tx Session
Tomas Winkler (1):
mei: bus: whitelist hdcp client
drivers/base/component.c | 30 +
drivers/gpu/drm/i915/i915_drv.c | 87 ++-
drivers/gpu/drm/i915/i915_drv.h | 3 +
drivers/gpu/drm/i915/i915_reg.h | 32 +
drivers/gpu/drm/i915/intel_display.c | 6 +-
drivers/gpu/drm/i915/intel_dp.c | 345 ++++++++++-
drivers/gpu/drm/i915/intel_drv.h | 92 ++-
drivers/gpu/drm/i915/intel_hdcp.c | 1107 +++++++++++++++++++++++++++++++---
drivers/gpu/drm/i915/intel_hdmi.c | 192 +++++-
drivers/misc/mei/Kconfig | 7 +
drivers/misc/mei/Makefile | 2 +
drivers/misc/mei/bus-fixup.c | 16 +
drivers/misc/mei/hdcp/Makefile | 6 +
drivers/misc/mei/hdcp/mei_hdcp.c | 857 ++++++++++++++++++++++++++
drivers/misc/mei/hdcp/mei_hdcp.h | 408 +++++++++++++
include/drm/drm_dp_helper.h | 51 ++
include/drm/drm_hdcp.h | 237 ++++++++
include/drm/i915_component.h | 76 +++
include/linux/component.h | 2 +
include/linux/mei_hdcp.h | 100 +++
20 files changed, 3559 insertions(+), 97 deletions(-)
create mode 100644 drivers/misc/mei/hdcp/Makefile
create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.c
create mode 100644 drivers/misc/mei/hdcp/mei_hdcp.h
create mode 100644 include/linux/mei_hdcp.h
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2018-07-14 3:14 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-14 3:14 Ramalingam C [this message]
2018-07-14 3:14 ` [PATCH v6 01/35] drm: hdcp2.2 authentication msg definitions Ramalingam C
2018-07-31 6:21 ` Shankar, Uma
2018-08-01 11:14 ` Ramalingam C
2018-07-14 3:14 ` [PATCH v6 02/35] drm: HDMI and DP specific HDCP2.2 defines Ramalingam C
2018-07-31 8:25 ` Shankar, Uma
2018-08-01 11:34 ` Ramalingam C
2018-07-14 3:14 ` [PATCH v6 03/35] mei: bus: whitelist hdcp client Ramalingam C
2018-07-14 3:14 ` [PATCH v6 04/35] linux/mei: Header for mei_hdcp driver interface Ramalingam C
2018-07-31 8:39 ` Shankar, Uma
2018-07-14 3:14 ` [PATCH v6 05/35] drm/i915: wrapping all hdcp var into intel_hdcp Ramalingam C
2018-07-31 8:53 ` Shankar, Uma
2018-07-14 3:14 ` [PATCH v6 06/35] drm/i915: Define Intel HDCP2.2 registers Ramalingam C
2018-07-31 8:59 ` Shankar, Uma
2018-07-14 3:14 ` [PATCH v6 07/35] component: alloc component_match without any comp to match Ramalingam C
2018-07-14 3:14 ` [PATCH v6 08/35] drm/i915: component master at i915 driver load Ramalingam C
2018-07-14 3:14 ` [PATCH v6 09/35] drm/i915: Initialize HDCP2.2 and its MEI interface Ramalingam C
2018-07-17 1:29 ` kbuild test robot
2018-07-31 19:41 ` Shankar, Uma
2018-08-01 11:42 ` Ramalingam C
2018-07-14 3:14 ` [PATCH v6 10/35] drm/i915: Pullout the bksv read and validation Ramalingam C
2018-07-14 3:14 ` [PATCH v6 11/35] drm/i915: Enable and Disable of HDCP2.2 Ramalingam C
2018-07-31 20:49 ` Shankar, Uma
2018-07-14 3:14 ` [PATCH v6 12/35] drm/i915: Implement HDCP2.2 receiver authentication Ramalingam C
2018-08-01 9:41 ` Shankar, Uma
2018-08-30 6:34 ` Ramalingam C
2018-07-14 3:14 ` [PATCH v6 13/35] drm/i915: Implement HDCP2.2 repeater authentication Ramalingam C
2018-08-01 10:30 ` Shankar, Uma
2018-08-30 6:49 ` Ramalingam C
2018-07-14 3:14 ` [PATCH v6 14/35] drm/i915: Implement HDCP2.2 link integrity check Ramalingam C
2018-08-01 10:45 ` Shankar, Uma
2018-08-30 6:57 ` Ramalingam C
2018-07-14 3:14 ` [PATCH v6 15/35] drm/i915: Handle HDCP2.2 downstream topology change Ramalingam C
2018-07-14 3:14 ` [PATCH v6 16/35] drm/i915: hdcp_check_link only on CP_IRQ Ramalingam C
2018-07-14 3:14 ` [PATCH v6 17/35] drm/i915: Check HDCP 1.4 and 2.2 link " Ramalingam C
2018-08-01 11:02 ` Shankar, Uma
2018-08-30 7:24 ` Ramalingam C
2018-07-14 3:15 ` [PATCH v6 18/35] drm/i915: Implement the HDCP2.2 support for DP Ramalingam C
2018-08-01 11:31 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 19/35] drm/i915: Implement the HDCP2.2 support for HDMI Ramalingam C
2018-08-01 11:38 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 20/35] drm/i915: Add HDCP2.2 support for DP connectors Ramalingam C
2018-07-14 3:15 ` [PATCH v6 21/35] drm/i915: Add HDCP2.2 support for HDMI connectors Ramalingam C
2018-07-14 3:15 ` [PATCH v6 22/35] misc/mei/hdcp: Client driver for HDCP application Ramalingam C
2018-07-14 3:15 ` [PATCH v6 23/35] misc/mei/hdcp: Component framework for I915 Interface Ramalingam C
2018-08-01 13:06 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 24/35] misc/mei/hdcp: Define ME FW interface for HDCP2.2 Ramalingam C
2018-07-14 3:15 ` [PATCH v6 25/35] misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session Ramalingam C
2018-08-01 13:13 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 26/35] misc/mei/hdcp: Verify Receiver Cert and prepare km Ramalingam C
2018-08-01 13:18 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 27/35] misc/mei/hdcp: Verify H_prime Ramalingam C
2018-08-01 13:21 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 28/35] misc/mei/hdcp: Store the HDCP Pairing info Ramalingam C
2018-08-01 13:23 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 29/35] misc/mei/hdcp: Initiate Locality check Ramalingam C
2018-08-01 13:24 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 30/35] misc/mei/hdcp: Verify L_prime Ramalingam C
2018-08-01 13:26 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 31/35] misc/mei/hdcp: Prepare Session Key Ramalingam C
2018-08-01 13:29 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 32/35] misc/mei/hdcp: Repeater topology verification and ack Ramalingam C
2018-08-01 13:31 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 33/35] misc/mei/hdcp: Verify M_prime Ramalingam C
2018-08-01 13:33 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 34/35] misc/mei/hdcp: Enabling the HDCP authentication Ramalingam C
2018-08-01 13:36 ` Shankar, Uma
2018-07-14 3:15 ` [PATCH v6 35/35] misc/mei/hdcp: Closing wired HDCP2.2 Tx Session Ramalingam C
2018-08-01 13:38 ` Shankar, Uma
2018-07-14 3:39 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement HDCP2.2 (rev8) Patchwork
2018-07-14 3:49 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-07-14 3:55 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-07-30 9:09 ` [PATCH v6 00/35] drm/i915: Implement HDCP2.2 Shankar, Uma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531538117-1606-1-git-send-email-ramalingam.c@intel.com \
--to=ramalingam.c@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=seanpaul@chromium.org \
--cc=tomas.winkler@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox