public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: clinton.a.taylor@intel.com
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915/hdmi: Detect HDMI 2.0 monitors using multiple EDID capabilities
Date: Wed, 17 Oct 2018 16:10:34 -0700	[thread overview]
Message-ID: <1539817834-23408-1-git-send-email-clinton.a.taylor@intel.com> (raw)

From: Clint Taylor <clinton.a.taylor@intel.com>

HDMI 2.0 monitors may not support SCDC and still be able to accept VICs
above 63. Use multiple EDID capbilities to determine if the SINK is
actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique
EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is
not used during the test. The current HDMI AVI infoframe code only uses the
SCDC supported information in the HDMI Forum VSDB to determine if the sink
is HDMI 2.0. This patch adds checks for YCbCr420 Deep Color, YCbCR420 VDB,
YCBCR420 CMDB capabilities, and pipe is YCbCr420 to the existing SCDC
supported check to Infer SINK is HDMI 2.0.

HDMI 2.0 CTS HF1-51 test fails on the QD980B.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>

Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2c53efc..6913806 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -458,6 +458,34 @@ static void intel_write_infoframe(struct intel_encoder *encoder,
 					frame->any.type, buffer, len);
 }
 
+static bool is_hdmi2(const struct drm_connector *connector,
+			const struct intel_crtc_state *crtc_state)
+{
+	bool hdmi2 = false;
+	bool vdb_mode = false;
+	bool cmdb_mode = false;
+	int i = 0;
+
+	/* check VDB bits for HDMI 2.0 mode */
+	for (i = 0; i < BITS_TO_LONGS(128); i++)
+		if (connector->display_info.hdmi.y420_vdb_modes[i])
+			vdb_mode = true;
+
+	/* check CMDB bits for HDMI 2.0 mode */
+	for (i = 0; i < BITS_TO_LONGS(128); i++)
+		if (connector->display_info.hdmi.y420_cmdb_modes[i])
+			cmdb_mode = true;
+
+	if (connector->display_info.hdmi.scdc.supported ||
+	    connector->display_info.hdmi.y420_dc_modes ||
+	    crtc_state->ycbcr420 || vdb_mode || cmdb_mode) {
+		DRM_DEBUG_KMS("Inferred HDMI2 sink present\n");
+		hdmi2 = true;
+	}
+
+	return hdmi2;
+}
+
 static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder,
 					 const struct intel_crtc_state *crtc_state,
 					 const struct drm_connector_state *conn_state)
@@ -466,10 +494,12 @@ static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder,
 	const struct drm_display_mode *adjusted_mode =
 		&crtc_state->base.adjusted_mode;
 	struct drm_connector *connector = &intel_hdmi->attached_connector->base;
-	bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
+	bool is_hdmi2_sink = false;
 	union hdmi_infoframe frame;
 	int ret;
 
+	is_hdmi2_sink = is_hdmi2(connector, crtc_state);
+
 	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
 						       adjusted_mode,
 						       is_hdmi2_sink);
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2018-10-17 23:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-17 23:10 clinton.a.taylor [this message]
2018-10-17 23:22 ` ✗ Fi.CI.BAT: failure for drm/i915/hdmi: Detect HDMI 2.0 monitors using multiple EDID capabilities Patchwork
2018-10-18 10:23 ` [PATCH] " Ville Syrjälä
2018-10-24 21:04 ` [PATCH v2] " clinton.a.taylor
2018-10-26 16:26   ` Ville Syrjälä
2018-10-24 22:10 ` ✓ Fi.CI.BAT: success for drm/i915/hdmi: Detect HDMI 2.0 monitors using multiple EDID capabilities (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539817834-23408-1-git-send-email-clinton.a.taylor@intel.com \
    --to=clinton.a.taylor@intel.com \
    --cc=Intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox