From: Simon Farnsworth <simon.farnsworth@onelan.com>
To: intel-gfx@lists.freedesktop.org
Subject: Page flipping not working as expected for compositing - engineering resource available to help fix it
Date: Fri, 7 May 2010 14:07:47 +0100 [thread overview]
Message-ID: <201005071407.48208.simon.farnsworth@onelan.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 3554 bytes --]
Hello,
We're using Intel GPUs and Linux in our digital signage players, and hitting
problems with getting OpenGL compositing to be tear-free. My understanding is
that we need to be fairly close to the bleeding edge to get this working, and
that the Fedora 12 packages aren't good enough.
I've therefore built a kernel and X stack from git, using the following
components on top of a Fedora 12 installation, but I'm not getting the
behaviour I'd expect:
* drm-intel-next kernel from
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel.git branch drm-
intel-next
as of e15831656778d032f3c7655949f8cc3997f2b04a
* util-macros-1.7.0 from the tarball at
http://ftp.x.org/pub/individual/util/util-macros-1.7.0.tar.bz2
* dri2proto from
git://anongit.freedesktop.org/xorg/proto/dri2proto branch master
as of c34ce137fdb21fc9a52bb8d5a0c25e3c5d79e687
* libdrm from
git://anongit.freedesktop.org/mesa/drm branch master
as of 6293152eb065016a2e5e4fcd047c2db5c2fb0f36
* mesa from
git://anongit.freedesktop.org/mesa/mesa branch master
as of f58d780b08a7059b82707291ad163cf6590134df
* xserver from
git://anongit.freedesktop.org/xorg/xserver branch master
as of 72758287f79a4f1aa8fa388f20947042e3e14693
* xf86-video-intel from
git://anongit.freedesktop.org/xorg/driver/xf86-video-intel branch master
as of 8562b7bc6740eef2602af76b8685388efd2d4d37
The kernel appears to induce out of range signals on my display, which is one
bug - am I using the correct kernel tree here? I can, however, test the
userspace stack against the F12 kernel, which appears to have enough
pageflipping support to tell me that I'm on the right lines.
When I run my test program in direct rendering mode, I see a steady 60 fps;
unfortunately, it appears that I can't use that for my compositing, as
GLX_EXT_texture_from_pixmap doesn't function when I'm direct rendering (the
resulting textures have no contents, so my compositing code draws white
rectangles).
I've attached my test program (it's based on our C++ OpenGL compositor, but
cut down to just test OpenGL pageflipping) as performance.c, and my test X
stack's Xorg.0.log after one run of "performance -indirect" (which ran for 573
frames). I'm using a 32-bit PAE kernel - I can add information as required,
and I'm happy to run tests or experiments for people.
I therefore have two questions:
1) Am I using the right kernel tree for page flipping? If not, what should I
use? I'm quite git-happy, so if the answer is "this tree with these bits
merged in and these patches on top", that's fine.
2) How should I go about fixing compositing? Should I fix indirect rendering to
use pageflipping (and if so, where do I start looking for the code that's
getting it wrong), or should I make TFP work when direct rendering (and again,
where should I start looking)?
I have a mild personal preference for making TFP work when direct rendering -
but this is because perf on my test program suggests that I gain from using
vertex buffers objects (it appears that i965_dri.so implements glDrawArrays
with a temporary VBO if I'm not using VBOs), and AIGLX doesn't support VBOs.
Our management sees this as a high priority, so both myself and my colleagues
are able to drop what we're doing to work on this during office hours (10am to
6pm BST); we have C coding experience, and have contributed patches before, so
we're happy to dive into the code and debug if that's what's needed - some
idea of where to start looking would be really helpful.
Any advice will be gratefully received.
[-- Attachment #2: performance.c --]
[-- Type: text/x-csrc, Size: 4975 bytes --]
/* I've been compiling this with:
gcc -Wall -Werror -g -Os performance.c -lX11 -lGL -lGLU -lXcomposite -lglut -lGLEW -o performance
*/
#include <stdlib.h>
#include <stdio.h>
#include <GL/glew.h>
#include <GL/glut.h>
#include <GL/glxew.h>
#include <sys/time.h>
/* Remove the #undef if you wish to use VBOs - these don't work
for indirect rendering, as the xserver only exposes OpenGL 1.4, not 1.5
*/
#define USE_VBO 1
#undef USE_VBO
static const GLfloat m_vertexes[] = { 0.0f, 1.0f,
0.0f, 0.0f,
1.0f, 1.0f,
1.0f, 0.0f };
static const GLfloat m_texcoords[] = { 0.0f, 1.0f,
0.0f, 0.0f,
1.0f, 1.0f,
1.0f, 0.0f };
#ifdef USE_VBO
static const size_t vertex = 0;
static const size_t texcoord = 1;
static GLuint m_buffers[2];
#endif
static GLuint m_textures[2];
static double start_time;
static unsigned frames = 0;
#ifdef USE_VBO
static void setupBuffers( void )
{
glGenBuffers( 2, m_buffers );
glBindBuffer( GL_ARRAY_BUFFER, m_buffers[vertex] );
glBufferData( GL_ARRAY_BUFFER, sizeof( GLfloat ) * 8, m_vertexes, GL_STATIC_DRAW );
glVertexPointer( 2, GL_FLOAT, sizeof(GLfloat) * 2, 0 );
glBindBuffer( GL_ARRAY_BUFFER, m_buffers[texcoord] );
glBufferData( GL_ARRAY_BUFFER, sizeof( GLfloat ) * 8, m_texcoords, GL_STATIC_DRAW );
glTexCoordPointer( 2, GL_FLOAT, sizeof(GLfloat) * 2, 0 );
}
#endif
static void setupTextures( void )
{
glGenTextures( 2, m_textures );
int texno;
for( texno = 0; texno < 2; ++texno )
{
GLubyte data[ 256 * 256 * 4];
size_t i;
for( i = 0; i < 256 * 256 * 4; ++i )
{
if( i % 4 == texno )
{
data[i] = 0;
}
else
{
data[i] = -1;
}
}
glBindTexture( GL_TEXTURE_2D, m_textures[texno] );
glPixelTransferf( GL_ALPHA_BIAS, 1.0 );
glTexImage2D( GL_TEXTURE_2D, 0, GL_RGB,
256, 256, 0,
GL_BGRA,
GL_UNSIGNED_BYTE, data);
glPixelTransferf( GL_ALPHA_BIAS, 0.0 );
glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST );
glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST );
glTexEnvi( GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE );
}
}
static double timeOfDay()
{
struct timeval t;
gettimeofday( &t, NULL );
return ((double)(t.tv_sec) + (double)( t.tv_usec )/1000000.0);
}
static void renderScene( void )
{
static int texno = 0;
static double last_frame_time = 0;
double current_frame_time;
double frame_time;
glColor4f( 1.0, 1.0, 1.0, 1.0 );
glBindTexture( GL_TEXTURE_2D, m_textures[texno] );
#ifdef USE_VBO
glDrawArrays( GL_TRIANGLE_STRIP, 0, 4 );
#else
glVertexPointer( 2, GL_FLOAT, sizeof(GLfloat) * 2, m_vertexes );
glTexCoordPointer( 2, GL_FLOAT, sizeof(GLfloat) * 2, m_texcoords );
glDrawArrays( GL_TRIANGLE_STRIP, 0, 4 );
#endif
glutSwapBuffers();
current_frame_time = timeOfDay();
texno = (texno + 1) % 2;
++frames;
if( (frames % 60) == 0 )
{
double now = timeOfDay();
printf( "Last 60 frames rate %f fps\n", 60 / (now - start_time) );
start_time = now;
}
frame_time = current_frame_time - last_frame_time;
if( frame_time * 60.0 < 0.9 )
{
printf( "Frames too fast at frame %d\n", frames );
printf( "%lf frames per second\n" , 1.0 / frame_time );
}
if( frame_time * 60.0 > 1.1 )
{
printf( "Frames too slow at frame %d\n", frames );
printf( "%lf frames per second\n" , 1.0 / frame_time );
}
last_frame_time = current_frame_time;
}
int main( int argc, char *argv[] )
{
glutInit( &argc, argv );
glutInitDisplayMode( GLUT_DOUBLE | GLUT_RGBA );
glutInitWindowPosition( 0, 0 );
glutInitWindowSize( 1024, 768 );
glutCreateWindow( "3D performance test" );
glutFullScreen();
glewExperimental = GL_TRUE;
GLenum err = glewInit();
if( err != GLEW_OK )
{
fprintf( stderr, "GLEW init: %s\n", glewGetErrorString( err ) );
exit(1);
}
glMatrixMode( GL_PROJECTION );
glLoadIdentity();
/* left, right, bottom, top - gets 0,0 at top, left */
gluOrtho2D( 0, 1, 1, 0 );
glutDisplayFunc( renderScene );
glutIdleFunc( renderScene );
glEnable( GL_TEXTURE_2D );
glEnable( GL_BLEND );
glEnableClientState( GL_VERTEX_ARRAY );
glEnableClientState( GL_TEXTURE_COORD_ARRAY );
setupTextures();
#ifdef USE_VBO
setupBuffers();
#endif
if( glXSwapIntervalSGI( 1 ) != 0 )
{
fprintf( stderr, "Could not set swap interval\n" );
}
start_time = timeOfDay();
glutMainLoop();
return 0;
}
[-- Attachment #3: Xorg.0.log --]
[-- Type: text/x-log, Size: 27670 bytes --]
[ 9284.903]
X.Org X Server 1.8.99
Release Date: unreleased
[ 9284.904] X Protocol Version 11, Revision 0
[ 9284.904] Build Operating System: Linux 2.6.32.11-99.fc12.x86_64 i686
[ 9284.904] Current Operating System: Linux ntb9191.office.onelan.co.uk 2.6.32.11-99.fc12.i686.PAE #1 SMP Mon Apr 5 16:15:03 EDT 2010 i686
[ 9284.904] Kernel command line: ro root=/dev/NTBgroup/System2 quiet pci=nommconf
[ 9284.904] Build Date: 06 May 2010 06:32:43PM
[ 9284.904]
[ 9284.904] Current version of pixman: 0.16.6
[ 9284.904] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9284.904] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9284.904] (==) Log file: "/usr/local/x11test/var/log/Xorg.0.log", Time: Fri May 7 14:06:30 2010
[ 9284.904] (II) Loader magic: 0x81e3ea0
[ 9284.904] (II) Module ABI versions:
[ 9284.904] X.Org ANSI C Emulation: 0.4
[ 9284.904] X.Org Video Driver: 8.0
[ 9284.904] X.Org XInput driver : 10.0
[ 9284.904] X.Org Server Extension : 4.0
[ 9284.914] (--) PCI:*(0:0:2:0) 8086:2992:103c:2803 Intel Corporation 82Q963/Q965 Integrated Graphics Controller rev 2, Mem @ 0xf0400000/1048576, 0xe0000000/268435456, I/O @ 0x00001100/8, BIOS @ 0x????????/131072
[ 9284.914] (==) Using default built-in configuration (30 lines)
[ 9284.914] (==) --- Start of built-in configuration ---
[ 9284.914] Section "Device"
[ 9284.914] Identifier "Builtin Default intel Device 0"
[ 9284.914] Driver "intel"
[ 9284.914] EndSection
[ 9284.914] Section "Screen"
[ 9284.914] Identifier "Builtin Default intel Screen 0"
[ 9284.914] Device "Builtin Default intel Device 0"
[ 9284.915] EndSection
[ 9284.915] Section "Device"
[ 9284.915] Identifier "Builtin Default vesa Device 0"
[ 9284.915] Driver "vesa"
[ 9284.915] EndSection
[ 9284.915] Section "Screen"
[ 9284.915] Identifier "Builtin Default vesa Screen 0"
[ 9284.915] Device "Builtin Default vesa Device 0"
[ 9284.915] EndSection
[ 9284.915] Section "Device"
[ 9284.915] Identifier "Builtin Default fbdev Device 0"
[ 9284.915] Driver "fbdev"
[ 9284.915] EndSection
[ 9284.915] Section "Screen"
[ 9284.915] Identifier "Builtin Default fbdev Screen 0"
[ 9284.915] Device "Builtin Default fbdev Device 0"
[ 9284.915] EndSection
[ 9284.915] Section "ServerLayout"
[ 9284.915] Identifier "Builtin Default Layout"
[ 9284.915] Screen "Builtin Default intel Screen 0"
[ 9284.915] Screen "Builtin Default vesa Screen 0"
[ 9284.915] Screen "Builtin Default fbdev Screen 0"
[ 9284.915] EndSection
[ 9284.915] (==) --- End of built-in configuration ---
[ 9284.915] (==) ServerLayout "Builtin Default Layout"
[ 9284.915] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 9284.915] (**) | |-->Monitor "<default monitor>"
[ 9284.915] (**) | |-->Device "Builtin Default intel Device 0"
[ 9284.915] (==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
[ 9284.915] (**) |-->Screen "Builtin Default vesa Screen 0" (1)
[ 9284.915] (**) | |-->Monitor "<default monitor>"
[ 9284.915] (**) | |-->Device "Builtin Default vesa Device 0"
[ 9284.915] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
[ 9284.915] (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
[ 9284.915] (**) | |-->Monitor "<default monitor>"
[ 9284.915] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 9284.915] (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
[ 9284.915] (==) Automatically adding devices
[ 9284.915] (==) Automatically enabling devices
[ 9284.915] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[ 9284.915] Entry deleted from font path.
[ 9284.915] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[ 9284.915] Entry deleted from font path.
[ 9284.915] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[ 9284.915] Entry deleted from font path.
[ 9284.916] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[ 9284.916] Entry deleted from font path.
[ 9284.916] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 9284.916] Entry deleted from font path.
[ 9284.916] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 9284.916] Entry deleted from font path.
[ 9284.916] (==) FontPath set to:
[ 9284.916] (++) ModulePath set to "/usr/local/x11test/lib/xorg/modules/,/usr/lib/xorg/modules/"
[ 9284.916] (II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
[ 9284.916] (II) Open ACPI successful (/var/run/acpid.socket)
[ 9284.916] (II) LoadModule: "extmod"
[ 9284.916] (II) Loading /usr/local/x11test/lib/xorg/modules/extensions/libextmod.so
[ 9284.916] (II) Module extmod: vendor="X.Org Foundation"
[ 9284.916] compiled for 1.8.99, module version = 1.0.0
[ 9284.916] Module class: X.Org Server Extension
[ 9284.916] ABI class: X.Org Server Extension, version 4.0
[ 9284.916] (II) Loading extension MIT-SCREEN-SAVER
[ 9284.916] (II) Loading extension XFree86-VidModeExtension
[ 9284.916] (II) Loading extension XFree86-DGA
[ 9284.916] (II) Loading extension DPMS
[ 9284.916] (II) Loading extension XVideo
[ 9284.916] (II) Loading extension XVideo-MotionCompensation
[ 9284.916] (II) Loading extension X-Resource
[ 9284.916] (II) LoadModule: "dbe"
[ 9284.916] (II) Loading /usr/local/x11test/lib/xorg/modules/extensions/libdbe.so
[ 9284.916] (II) Module dbe: vendor="X.Org Foundation"
[ 9284.916] compiled for 1.8.99, module version = 1.0.0
[ 9284.916] Module class: X.Org Server Extension
[ 9284.916] ABI class: X.Org Server Extension, version 4.0
[ 9284.916] (II) Loading extension DOUBLE-BUFFER
[ 9284.916] (II) LoadModule: "glx"
[ 9284.917] (II) Loading /usr/local/x11test/lib/xorg/modules/extensions/libglx.so
[ 9284.917] (II) Module glx: vendor="X.Org Foundation"
[ 9284.917] compiled for 1.8.99, module version = 1.0.0
[ 9284.917] ABI class: X.Org Server Extension, version 4.0
[ 9284.917] (==) AIGLX enabled
[ 9284.917] (II) Loading extension GLX
[ 9284.917] (II) LoadModule: "record"
[ 9284.917] (II) Loading /usr/local/x11test/lib/xorg/modules/extensions/librecord.so
[ 9284.917] (II) Module record: vendor="X.Org Foundation"
[ 9284.917] compiled for 1.8.99, module version = 1.13.0
[ 9284.917] Module class: X.Org Server Extension
[ 9284.917] ABI class: X.Org Server Extension, version 4.0
[ 9284.917] (II) Loading extension RECORD
[ 9284.917] (II) LoadModule: "dri"
[ 9284.917] (II) Loading /usr/local/x11test/lib/xorg/modules/extensions/libdri.so
[ 9284.917] (II) Module dri: vendor="X.Org Foundation"
[ 9284.917] compiled for 1.8.99, module version = 1.0.0
[ 9284.917] ABI class: X.Org Server Extension, version 4.0
[ 9284.917] (II) Loading extension XFree86-DRI
[ 9284.917] (II) LoadModule: "dri2"
[ 9284.918] (II) Loading /usr/local/x11test/lib/xorg/modules/extensions/libdri2.so
[ 9284.918] (II) Module dri2: vendor="X.Org Foundation"
[ 9284.918] compiled for 1.8.99, module version = 1.2.0
[ 9284.918] ABI class: X.Org Server Extension, version 4.0
[ 9284.918] (II) Loading extension DRI2
[ 9284.918] (II) LoadModule: "intel"
[ 9284.918] (II) Loading /usr/local/x11test/lib/xorg/modules/drivers/intel_drv.so
[ 9284.918] (II) Module intel: vendor="X.Org Foundation"
[ 9284.918] compiled for 1.8.99, module version = 2.11.0
[ 9284.918] Module class: X.Org Video Driver
[ 9284.918] ABI class: X.Org Video Driver, version 8.0
[ 9284.918] (II) LoadModule: "vesa"
[ 9284.919] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9284.919] (II) Module vesa: vendor="X.Org Foundation"
[ 9284.919] compiled for 1.7.1, module version = 2.3.0
[ 9284.919] Module class: X.Org Video Driver
[ 9284.919] ABI class: X.Org Video Driver, version 6.0
[ 9284.919] (EE) module ABI major version (6) doesn't match the server's version (8)
[ 9284.919] (II) UnloadModule: "vesa"
[ 9284.919] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9284.919] (EE) Failed to load module "vesa" (module requirement mismatch, 0)
[ 9284.919] (II) LoadModule: "fbdev"
[ 9284.920] (WW) Warning, couldn't open module fbdev
[ 9284.920] (II) UnloadModule: "fbdev"
[ 9284.920] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9284.920] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 9284.920] (--) using VT number 7
[ 9285.030] (II) Primary Device is: PCI 00@00:02:0
[ 9285.032] drmOpenDevice: node name is /dev/dri/card0
[ 9285.032] drmOpenDevice: open result is 12, (OK)
[ 9285.179] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 9285.179] drmOpenDevice: node name is /dev/dri/card0
[ 9285.179] drmOpenDevice: open result is 12, (OK)
[ 9285.179] drmOpenByBusid: drmOpenMinor returns 12
[ 9285.179] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 9285.179] (II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 9285.179] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 9285.179] (==) intel(0): RGB weight 888
[ 9285.179] (==) intel(0): Default visual is TrueColor
[ 9285.179] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965Q
[ 9285.179] (--) intel(0): Chipset: "965Q"
[ 9285.179] (==) intel(0): video overlay key set to 0x101fe
[ 9285.286] (II) intel(0): Output VGA1 has no monitor section
[ 9285.393] (II) intel(0): EDID for output VGA1
[ 9285.393] (II) intel(0): Manufacturer: TEO Model: 6770 Serial#: 13585
[ 9285.393] (II) intel(0): Year: 2005 Week: 31
[ 9285.393] (II) intel(0): EDID Version: 1.3
[ 9285.393] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 9285.393] (II) intel(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[ 9285.393] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 9285.393] (II) intel(0): Gamma: 2.20
[ 9285.393] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 9285.393] (II) intel(0): First detailed timing is preferred mode
[ 9285.393] (II) intel(0): redX: 0.652 redY: 0.333 greenX: 0.277 greenY: 0.629
[ 9285.393] (II) intel(0): blueX: 0.141 blueY: 0.054 whiteX: 0.310 whiteY: 0.330
[ 9285.393] (II) intel(0): Supported established timings:
[ 9285.393] (II) intel(0): 720x400@70Hz
[ 9285.393] (II) intel(0): 640x480@60Hz
[ 9285.393] (II) intel(0): 640x480@67Hz
[ 9285.393] (II) intel(0): 640x480@72Hz
[ 9285.393] (II) intel(0): 640x480@75Hz
[ 9285.393] (II) intel(0): 800x600@56Hz
[ 9285.393] (II) intel(0): 800x600@60Hz
[ 9285.393] (II) intel(0): 800x600@72Hz
[ 9285.393] (II) intel(0): 800x600@75Hz
[ 9285.393] (II) intel(0): 832x624@75Hz
[ 9285.393] (II) intel(0): 1024x768@60Hz
[ 9285.393] (II) intel(0): 1024x768@70Hz
[ 9285.393] (II) intel(0): 1024x768@75Hz
[ 9285.393] (II) intel(0): 1280x1024@75Hz
[ 9285.393] (II) intel(0): Manufacturer's mask: 0
[ 9285.393] (II) intel(0): Supported standard timings:
[ 9285.393] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 9285.393] (II) intel(0): #1: hsize: 1152 vsize 864 refresh: 70 vid: 19057
[ 9285.393] (II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 9285.393] (II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 9285.393] (II) intel(0): #4: hsize: 1280 vsize 960 refresh: 70 vid: 19073
[ 9285.394] (II) intel(0): #5: hsize: 1280 vsize 960 refresh: 75 vid: 20353
[ 9285.394] (II) intel(0): #6: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 9285.394] (II) intel(0): Supported detailed timing:
[ 9285.394] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 9285.394] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 9285.394] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 9285.394] (II) intel(0): Ranges: V min: 49 V max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
[ 9285.394] (II) intel(0): Monitor name: TECO TL766
[ 9285.394] (II) intel(0): Serial No: R75CP13585
[ 9285.394] (II) intel(0): EDID (in hex):
[ 9285.394] (II) intel(0): 00ffffffffffff0050af706711350000
[ 9285.394] (II) intel(0): 1f0f01036d221b78ea1036a75547a124
[ 9285.394] (II) intel(0): 0d4f54bfef007140714a714f8140814a
[ 9285.394] (II) intel(0): 814f81800101302a009851002a403070
[ 9285.394] (II) intel(0): 1300520e1100001e000000fd00314b18
[ 9285.394] (II) intel(0): 500e000a202020202020000000fc0054
[ 9285.394] (II) intel(0): 45434f20544c3736360a2020000000ff
[ 9285.394] (II) intel(0): 00523735435031333538350a20200059
[ 9285.394] (II) intel(0): EDID vendor "TEO", prod id 26480
[ 9285.394] (II) intel(0): Using EDID range info for horizontal sync
[ 9285.394] (II) intel(0): Using EDID range info for vertical refresh
[ 9285.394] (II) intel(0): Printing DDC gathered Modelines:
[ 9285.394] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 9285.394] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 9285.394] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 9285.394] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 9285.394] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 9285.394] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 9285.394] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 9285.394] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 9285.394] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 9285.394] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 9285.394] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 9285.394] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 9285.394] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 9285.394] (II) intel(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x960"x70.0 120.84 1280 1368 1504 1728 960 961 964 999 -hsync +vsync (69.9 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.2 kHz)
[ 9285.394] (II) intel(0): Printing probed modes for output VGA1
[ 9285.394] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x960"x75.0 129.94 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.2 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x960"x70.0 120.90 1280 1368 1504 1728 960 961 964 999 -hsync +vsync (70.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 9285.394] (II) intel(0): Modeline "1152x864"x70.0 96.73 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz)
[ 9285.394] (II) intel(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 9285.394] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 9285.394] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 9285.394] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 9285.394] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 9285.394] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 9285.395] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 9285.395] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 9285.395] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 9285.395] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 9285.395] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 9285.395] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 9285.395] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 9285.395] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 9285.395] (II) intel(0): Output VGA1 connected
[ 9285.395] (II) intel(0): Using exact sizes for initial modes
[ 9285.395] (II) intel(0): Output VGA1 using initial mode 1280x1024
[ 9285.395] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9285.395] (II) intel(0): Kernel page flipping support detected, enabling
[ 9285.395] (**) intel(0): Display dimensions: (340, 270) mm
[ 9285.395] (**) intel(0): DPI set to (95, 96)
[ 9285.395] (II) Loading sub module "fb"
[ 9285.395] (II) LoadModule: "fb"
[ 9285.395] (II) Loading /usr/local/x11test/lib/xorg/modules/libfb.so
[ 9285.395] (II) Module fb: vendor="X.Org Foundation"
[ 9285.395] compiled for 1.8.99, module version = 1.0.0
[ 9285.395] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9285.395] (==) Depth 24 pixmap format is 32 bpp
[ 9285.395] (II) intel(0): [DRI2] Setup complete
[ 9285.395] (II) intel(0): [DRI2] DRI driver: i965
[ 9285.395] (**) intel(0): Tiling enabled
[ 9285.395] (**) intel(0): SwapBuffers wait enabled
[ 9285.396] (==) intel(0): VideoRam: 262144 KB
[ 9285.396] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 9285.396] (II) intel(0): Tiled allocation successful.
[ 9285.407] (II) UXA(0): Driver registered support for the following operations:
[ 9285.407] (II) solid
[ 9285.407] (II) copy
[ 9285.407] (II) composite (RENDER acceleration)
[ 9285.407] (II) put_image
[ 9285.407] (==) intel(0): Backing store disabled
[ 9285.407] (==) intel(0): Silken mouse enabled
[ 9285.407] (II) intel(0): Initializing HW Cursor
[ 9285.501] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9285.501] (==) intel(0): DPMS enabled
[ 9285.501] (II) intel(0): Set up textured video
[ 9285.501] (II) intel(0): Set up overlay video
[ 9285.501] (II) intel(0): direct rendering: DRI2 Enabled
[ 9285.501] (--) RandR disabled
[ 9285.501] (II) Initializing built-in extension Generic Event Extension
[ 9285.501] (II) Initializing built-in extension SHAPE
[ 9285.501] (II) Initializing built-in extension MIT-SHM
[ 9285.501] (II) Initializing built-in extension XInputExtension
[ 9285.501] (II) Initializing built-in extension XTEST
[ 9285.501] (II) Initializing built-in extension BIG-REQUESTS
[ 9285.501] (II) Initializing built-in extension SYNC
[ 9285.501] (II) Initializing built-in extension XKEYBOARD
[ 9285.501] (II) Initializing built-in extension XC-MISC
[ 9285.501] (II) Initializing built-in extension XINERAMA
[ 9285.501] (II) Initializing built-in extension XFIXES
[ 9285.501] (II) Initializing built-in extension RENDER
[ 9285.501] (II) Initializing built-in extension RANDR
[ 9285.501] (II) Initializing built-in extension COMPOSITE
[ 9285.501] (II) Initializing built-in extension DAMAGE
[ 9285.512] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 9285.512] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 9285.512] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 9285.512] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 9285.512] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 9285.512] (II) AIGLX: Loaded and initialized /usr/local/x11test/lib/dri/i965_dri.so
[ 9285.512] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9285.513] (II) intel(0): Setting screen physical size to 338 x 270
[ 9285.567] (II) config/hal: Adding input device AT Translated Set 2 keyboard
[ 9285.567] (II) LoadModule: "evdev"
[ 9285.568] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.575] (II) Module evdev: vendor="X.Org Foundation"
[ 9285.575] compiled for 1.7.1, module version = 2.3.2
[ 9285.575] Module class: X.Org XInput Driver
[ 9285.575] ABI class: X.Org XInput driver, version 7.0
[ 9285.575] (EE) module ABI major version (7) doesn't match the server's version (10)
[ 9285.575] (II) UnloadModule: "evdev"
[ 9285.575] (II) Unloading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.575] (EE) Failed to load module "evdev" (module requirement mismatch, 0)
[ 9285.575] (EE) No input driver matching `evdev'
[ 9285.575] (EE) config/hal: NewInputDeviceRequest failed (15)
[ 9285.579] (II) config/hal: Adding input device HP WMI hotkeys
[ 9285.579] (II) LoadModule: "evdev"
[ 9285.580] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.580] (II) Module evdev: vendor="X.Org Foundation"
[ 9285.580] compiled for 1.7.1, module version = 2.3.2
[ 9285.580] Module class: X.Org XInput Driver
[ 9285.580] ABI class: X.Org XInput driver, version 7.0
[ 9285.580] (EE) module ABI major version (7) doesn't match the server's version (10)
[ 9285.580] (II) UnloadModule: "evdev"
[ 9285.580] (II) Unloading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.580] (EE) Failed to load module "evdev" (module requirement mismatch, 0)
[ 9285.580] (EE) No input driver matching `evdev'
[ 9285.580] (EE) config/hal: NewInputDeviceRequest failed (15)
[ 9285.582] (II) config/hal: Adding input device Macintosh mouse button emulation
[ 9285.582] (II) LoadModule: "evdev"
[ 9285.583] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.583] (II) Module evdev: vendor="X.Org Foundation"
[ 9285.583] compiled for 1.7.1, module version = 2.3.2
[ 9285.583] Module class: X.Org XInput Driver
[ 9285.583] ABI class: X.Org XInput driver, version 7.0
[ 9285.583] (EE) module ABI major version (7) doesn't match the server's version (10)
[ 9285.583] (II) UnloadModule: "evdev"
[ 9285.583] (II) Unloading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.583] (EE) Failed to load module "evdev" (module requirement mismatch, 0)
[ 9285.583] (EE) No input driver matching `evdev'
[ 9285.583] (EE) config/hal: NewInputDeviceRequest failed (15)
[ 9285.587] (II) config/hal: Adding input device Power Button
[ 9285.587] (II) LoadModule: "evdev"
[ 9285.588] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.588] (II) Module evdev: vendor="X.Org Foundation"
[ 9285.588] compiled for 1.7.1, module version = 2.3.2
[ 9285.588] Module class: X.Org XInput Driver
[ 9285.588] ABI class: X.Org XInput driver, version 7.0
[ 9285.588] (EE) module ABI major version (7) doesn't match the server's version (10)
[ 9285.588] (II) UnloadModule: "evdev"
[ 9285.588] (II) Unloading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.588] (EE) Failed to load module "evdev" (module requirement mismatch, 0)
[ 9285.588] (EE) No input driver matching `evdev'
[ 9285.588] (EE) config/hal: NewInputDeviceRequest failed (15)
[ 9285.592] (II) config/hal: Adding input device Power Button
[ 9285.592] (II) LoadModule: "evdev"
[ 9285.593] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.593] (II) Module evdev: vendor="X.Org Foundation"
[ 9285.593] compiled for 1.7.1, module version = 2.3.2
[ 9285.593] Module class: X.Org XInput Driver
[ 9285.593] ABI class: X.Org XInput driver, version 7.0
[ 9285.593] (EE) module ABI major version (7) doesn't match the server's version (10)
[ 9285.593] (II) UnloadModule: "evdev"
[ 9285.593] (II) Unloading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9285.593] (EE) Failed to load module "evdev" (module requirement mismatch, 0)
[ 9285.593] (EE) No input driver matching `evdev'
[ 9285.593] (EE) config/hal: NewInputDeviceRequest failed (15)
[ 9309.282] (II) Open ACPI successful (/var/run/acpid.socket)
[ 9309.282] (II) APM registered successfully
[ 9309.282] (II) intel(0): [DRI2] Setup complete
[ 9309.282] (II) intel(0): [DRI2] DRI driver: i965
[ 9309.282] (**) intel(0): Tiling enabled
[ 9309.282] (**) intel(0): SwapBuffers wait enabled
[ 9309.282] (==) intel(0): VideoRam: 262144 KB
[ 9309.282] (II) intel(0): Attempting memory allocation with tiled buffers.
[ 9309.282] (II) intel(0): Tiled allocation successful.
[ 9309.293] (II) UXA(0): Driver registered support for the following operations:
[ 9309.293] (II) solid
[ 9309.293] (II) copy
[ 9309.293] (II) composite (RENDER acceleration)
[ 9309.293] (II) put_image
[ 9309.293] (II) intel(0): Initializing HW Cursor
[ 9309.324] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9309.324] (==) intel(0): DPMS enabled
[ 9309.324] (II) intel(0): Set up textured video
[ 9309.324] (II) intel(0): Set up overlay video
[ 9309.324] (II) intel(0): direct rendering: DRI2 Enabled
[ 9309.324] (--) RandR disabled
[ 9309.335] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 9309.335] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 9309.335] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 9309.335] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 9309.335] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 9309.335] (II) AIGLX: Loaded and initialized /usr/local/x11test/lib/dri/i965_dri.so
[ 9309.335] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9309.335] (II) intel(0): Setting screen physical size to 338 x 270
[-- Attachment #4: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2010-05-07 13:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-07 13:07 Simon Farnsworth [this message]
2010-05-10 11:04 ` Page flipping not working as expected for compositing - engineering resource available to help fix it Simon Farnsworth
2010-05-10 16:59 ` Simon Farnsworth
2010-05-10 17:57 ` Andrew Lutomirski
2010-05-10 18:00 ` Jesse Barnes
2010-05-11 8:40 ` Simon Farnsworth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201005071407.48208.simon.farnsworth@onelan.com \
--to=simon.farnsworth@onelan.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox