public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Zhenyu Wang <zhenyuw@linux.intel.com>
To: Wu Fengguang <fengguang.wu@intel.com>
Cc: "intel-gfx@lists.freedesktop..." <intel-gfx@lists.freedesktop.org>
Subject: Re: HDMI monitor hot remove handling
Date: Mon, 14 Nov 2011 10:05:05 +0800	[thread overview]
Message-ID: <20111114020505.GN22336@zhen-devel.sh.intel.com> (raw)
In-Reply-To: <20111111085041.GA4934@localhost>


[-- Attachment #1.1: Type: text/plain, Size: 6146 bytes --]

On 2011.11.11 16:50:41 +0800, Wu Fengguang wrote:
> > > > I still think you should do those in hot_plug(), to call detect() for current
> > > > status, write eld and set specific audio enable/disable bit for all audio stuff.
> > > > Just my sense, you may send RFC patch for other's comment. 
> 
> > yeah, mode_set() will only be in normal mode setting path and taking current
> > monitor's audio capability, but not on hot removal path. And if connector's DPMS off,
> > does audio need to care? I think no, as user might still like to hear sound, right? ;)
> > 
> > So looks currently nobody cares for hot removal, you need to set that by
> > yourself somewhere.
> 
> Zhenyu, according to your comments, here is the patch, tested OK on
> HDMI :)  DP not tested yet.

Well, I don't think I suggested a new hook for hot removal. ;)

You know that hot_plug() hook is intel encoder thing, which is the place
I think you can do audio config stuff. 

> 
> This notifies the audio driver of the HDMI/DP monitor hot removal
> event.
> 
> - clear SDVO_AUDIO_ENABLE/DP_AUDIO_OUTPUT_ENABLE
> - clear ELD Valid bit
> 
> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
> ---
>  drivers/gpu/drm/drm_crtc_helper.c |    4 ++++
>  drivers/gpu/drm/i915/intel_dp.c   |   19 +++++++++++++++++++
>  drivers/gpu/drm/i915/intel_drv.h  |    4 ++++
>  drivers/gpu/drm/i915/intel_hdmi.c |   17 +++++++++++++++++
>  include/drm/drm_crtc.h            |    1 +
>  5 files changed, 45 insertions(+)
> 
> --- linux.orig/drivers/gpu/drm/i915/intel_dp.c	2011-11-11 16:42:58.000000000 +0800
> +++ linux/drivers/gpu/drm/i915/intel_dp.c	2011-11-11 16:42:59.000000000 +0800
> @@ -1984,6 +1984,24 @@ intel_dp_detect(struct drm_connector *co
>  	return connector_status_connected;
>  }
>  
> +static void intel_dp_hot_remove(struct drm_connector *connector)
> +{
> +	struct intel_dp *intel_dp = intel_attached_dp(connector);
> +	struct drm_device *dev = intel_dp->base.base.dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	struct drm_crtc *crtc = intel_dp->base.base.crtc;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +
> +	intel_dp->DP &= ~DP_AUDIO_OUTPUT_ENABLE;
> +	I915_WRITE(intel_dp->output_reg, intel_dp->DP);
> +	POSTING_READ(intel_dp->output_reg);
> +	intel_wait_for_vblank(dev, intel_crtc->pipe);
> +
> +	connector->eld[0] = 0;
> +	if (dev_priv->display.write_eld)
> +		dev_priv->display.write_eld(connector, crtc);
> +}
> +
>  static int intel_dp_get_modes(struct drm_connector *connector)
>  {
>  	struct intel_dp *intel_dp = intel_attached_dp(connector);
> @@ -2143,6 +2161,7 @@ static const struct drm_connector_funcs 
>  	.detect = intel_dp_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
>  	.set_property = intel_dp_set_property,
> +	.hot_remove = intel_dp_hot_remove,
>  	.destroy = intel_dp_destroy,
>  };
>  
> --- linux.orig/drivers/gpu/drm/i915/intel_drv.h	2011-11-11 16:42:58.000000000 +0800
> +++ linux/drivers/gpu/drm/i915/intel_drv.h	2011-11-11 16:42:59.000000000 +0800
> @@ -382,6 +382,10 @@ extern void intel_fb_restore_mode(struct
>  extern void intel_init_clock_gating(struct drm_device *dev);
>  extern void intel_write_eld(struct drm_encoder *encoder,
>  			    struct drm_display_mode *mode);
> +extern void intel_hotplug_status(struct drm_device *dev,
> +			  struct drm_connector *connector,
> +			  struct drm_crtc *crtc,
> +			  enum drm_connector_status status);
>  extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe);
>  
>  #endif /* __INTEL_DRV_H__ */
> --- linux.orig/drivers/gpu/drm/i915/intel_hdmi.c	2011-11-11 16:42:58.000000000 +0800
> +++ linux/drivers/gpu/drm/i915/intel_hdmi.c	2011-11-11 16:42:59.000000000 +0800
> @@ -352,6 +352,22 @@ intel_hdmi_detect(struct drm_connector *
>  	return status;
>  }
>  
> +static void intel_hdmi_hot_remove(struct drm_connector *connector)
> +{
> +	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
> +	struct drm_i915_private *dev_priv = connector->dev->dev_private;
> +	u32 temp;
> +
> +	temp = I915_READ(intel_hdmi->sdvox_reg);
> +	I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_AUDIO_ENABLE);
> +	POSTING_READ(intel_hdmi->sdvox_reg);
> +
> +	connector->eld[0] = 0;
> +	if (dev_priv->display.write_eld)
> +		dev_priv->display.write_eld(connector,
> +					    intel_hdmi->base.base.crtc);
> +}
> +
>  static int intel_hdmi_get_modes(struct drm_connector *connector)
>  {
>  	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
> @@ -461,6 +477,7 @@ static const struct drm_connector_funcs 
>  	.detect = intel_hdmi_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
>  	.set_property = intel_hdmi_set_property,
> +	.hot_remove = intel_hdmi_hot_remove,
>  	.destroy = intel_hdmi_destroy,
>  };
>  
> --- linux.orig/drivers/gpu/drm/drm_crtc_helper.c	2011-11-11 16:42:58.000000000 +0800
> +++ linux/drivers/gpu/drm/drm_crtc_helper.c	2011-11-11 16:42:59.000000000 +0800
> @@ -907,6 +907,10 @@ static void output_poll_execute(struct w
>  			      old_status, connector->status);
>  		if (old_status != connector->status)
>  			changed = true;
> +		if (old_status == connector_status_connected &&
> +		    connector->status == connector_status_disconnected)
> +			connector->funcs->hot_remove(connector);
> +
>  	}
>  
>  	mutex_unlock(&dev->mode_config.mutex);
> --- linux.orig/include/drm/drm_crtc.h	2011-11-11 16:42:58.000000000 +0800
> +++ linux/include/drm/drm_crtc.h	2011-11-11 16:42:59.000000000 +0800
> @@ -419,6 +419,7 @@ struct drm_connector_funcs {
>  	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
>  	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
>  			     uint64_t val);
> +	void (*hot_remove)(struct drm_connector *connector);
>  	void (*destroy)(struct drm_connector *connector);
>  	void (*force)(struct drm_connector *connector);
>  };

-- 
Open Source Technology Center, Intel ltd.

$gpg --keyserver wwwkeys.pgp.net --recv-keys 4D781827

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2011-11-14  2:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20111111050131.GA7073@localhost>
     [not found] ` <20111111051524.GA8882@localhost>
     [not found]   ` <20111111052630.GG22336@zhen-devel.sh.intel.com>
     [not found]     ` <20111111054038.GA11861@localhost>
     [not found]       ` <20111111055703.GH22336@zhen-devel.sh.intel.com>
     [not found]         ` <20111111063439.GA19914@localhost>
     [not found]           ` <20111111064222.GJ22336@zhen-devel.sh.intel.com>
     [not found]             ` <20111111070554.GA22299@localhost>
     [not found]               ` <20111111071549.GL22336@zhen-devel.sh.intel.com>
2011-11-11  8:50                 ` HDMI monitor hot remove handling Wu Fengguang
2011-11-14  2:05                   ` Zhenyu Wang [this message]
2011-11-14  2:54                     ` Wu Fengguang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111114020505.GN22336@zhen-devel.sh.intel.com \
    --to=zhenyuw@linux.intel.com \
    --cc=fengguang.wu@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox