From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Chon Ming Lee <chon.ming.lee@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Move some hdmi enable function name to vlv specific.
Date: Wed, 16 Oct 2013 12:53:34 +0300 [thread overview]
Message-ID: <20131016095334.GT13047@intel.com> (raw)
In-Reply-To: <1381914461-23125-1-git-send-email-chon.ming.lee@intel.com>
On Wed, Oct 16, 2013 at 05:07:41PM +0800, Chon Ming Lee wrote:
> There is no functional change on this patch. Only rename several
> hdmi encoder function name which suppose to use only by valleyview from
> intel_hdmi_pre_pll_enable to vlv_hdmi_pre_pll_enable, and etc.
>
> Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
As a followup you could also remove the pointless IS_VALLEYVIEW() checks
from pre_enable and pre_pll_enable.
> ---
> drivers/gpu/drm/i915/intel_hdmi.c | 12 ++++++------
> 1 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 4f4d346..51a8336 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1074,7 +1074,7 @@ done:
> return 0;
> }
>
> -static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
> +static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
> {
> struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> struct drm_device *dev = encoder->base.dev;
> @@ -1127,7 +1127,7 @@ static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
> vlv_wait_port_ready(dev_priv, port);
> }
>
> -static void intel_hdmi_pre_pll_enable(struct intel_encoder *encoder)
> +static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
> {
> struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> struct drm_device *dev = encoder->base.dev;
> @@ -1163,7 +1163,7 @@ static void intel_hdmi_pre_pll_enable(struct intel_encoder *encoder)
> mutex_unlock(&dev_priv->dpio_lock);
> }
>
> -static void intel_hdmi_post_disable(struct intel_encoder *encoder)
> +static void vlv_hdmi_post_disable(struct intel_encoder *encoder)
> {
> struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> @@ -1313,10 +1313,10 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
> intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
> intel_encoder->get_config = intel_hdmi_get_config;
> if (IS_VALLEYVIEW(dev)) {
> - intel_encoder->pre_pll_enable = intel_hdmi_pre_pll_enable;
> - intel_encoder->pre_enable = intel_hdmi_pre_enable;
> + intel_encoder->pre_pll_enable = vlv_hdmi_pre_pll_enable;
> + intel_encoder->pre_enable = vlv_hdmi_pre_enable;
> intel_encoder->enable = vlv_enable_hdmi;
> - intel_encoder->post_disable = intel_hdmi_post_disable;
> + intel_encoder->post_disable = vlv_hdmi_post_disable;
> } else {
> intel_encoder->enable = intel_enable_hdmi;
> }
> --
> 1.7.7.6
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
next prev parent reply other threads:[~2013-10-16 9:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 9:07 [PATCH] drm/i915: Move some hdmi enable function name to vlv specific Chon Ming Lee
2013-10-16 9:53 ` Ville Syrjälä [this message]
2013-10-16 10:17 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131016095334.GT13047@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=chon.ming.lee@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox