Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Damien Lespiau <damien.lespiau@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/6] drm/i915: Move num_plane to the intel_device_info structure
Date: Thu, 12 Dec 2013 13:40:32 +0200	[thread overview]
Message-ID: <20131212114032.GW10036@intel.com> (raw)
In-Reply-To: <1386847263-2885-3-git-send-email-damien.lespiau@intel.com>

On Thu, Dec 12, 2013 at 11:20:59AM +0000, Damien Lespiau wrote:
> And rename it to num_planes to match num_pipes.

It should really be num_sprites, or even more accurately
num_sprites_per_pipe but that's a bit of a mouthful.

> 
> This limit lives with num_pipes really, and now that dev_priv->info is
> writable we can put it there instead.
> 
> While at it, introduce a intel_device_info_runtime_init() where we'll be
> able to gather the device info fields at run-time.
> 
> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_dma.c      | 21 ++++++++++++++++++---
>  drivers/gpu/drm/i915/i915_drv.h      |  5 ++---
>  drivers/gpu/drm/i915/intel_display.c |  4 ++--
>  3 files changed, 22 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 332d5b6..0f75d5c7 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -1459,6 +1459,23 @@ static void i915_dump_device_info(struct drm_i915_private *dev_priv)
>  #undef SEP_COMMA
>  }
>  
> +/*
> + * Determine various intel_device_info fields at runtime.
> + *
> + * Use it when either:
> + *   - it's judged too laborious to fill n static structures with the limit
> + *     when a simple if statement does the job,
> + *   - run-time checks (eg read fuse/strap registers) are needed.
> + */
> +static void intel_device_info_runtime_init(struct drm_device *dev)
> +{
> +	struct intel_device_info *info = INTEL_INFO(dev);
> +
> +	info->num_planes = 1;
> +	if (IS_VALLEYVIEW(dev))
> +		info->num_planes = 2;
> +}

It's constant so you could just initialize it in the struct
initialization.

> +
>  /**
>   * i915_driver_load - setup chip and create an initial config
>   * @dev: DRM device
> @@ -1631,9 +1648,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
>  	if (!IS_I945G(dev) && !IS_I945GM(dev))
>  		pci_enable_msi(dev->pdev);
>  
> -	dev_priv->num_plane = 1;
> -	if (IS_VALLEYVIEW(dev))
> -		dev_priv->num_plane = 2;
> +	intel_device_info_runtime_init(dev);
>  
>  	if (INTEL_INFO(dev)->num_pipes) {
>  		ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 6a7844c..704dc7d 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -77,7 +77,7 @@ enum plane {
>  };
>  #define plane_name(p) ((p) + 'A')
>  
> -#define sprite_name(p, s) ((p) * dev_priv->num_plane + (s) + 'A')
> +#define sprite_name(p, s) ((p) * INTEL_INFO(dev)->num_planes + (s) + 'A')
>  
>  enum port {
>  	PORT_A = 0,
> @@ -503,6 +503,7 @@ struct intel_uncore {
>  struct intel_device_info {
>  	u32 display_mmio_offset;
>  	u8 num_pipes:3;
> +	u8 num_planes:2;
>  	u8 gen;
>  	u8 ring_mask; /* Rings supported by the HW */
>  	DEV_INFO_FOR_EACH_FLAG(DEFINE_FLAG, SEP_SEMICOLON);
> @@ -1389,8 +1390,6 @@ typedef struct drm_i915_private {
>  	u32 hpd_event_bits;
>  	struct timer_list hotplug_reenable_timer;
>  
> -	int num_plane;
> -
>  	struct i915_fbc fbc;
>  	struct intel_opregion opregion;
>  	struct intel_vbt_data vbt;
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 71876d9..25cbe36 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1189,7 +1189,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
>  	u32 val;
>  
>  	if (IS_VALLEYVIEW(dev)) {
> -		for (i = 0; i < dev_priv->num_plane; i++) {
> +		for (i = 0; i < INTEL_INFO(dev)->num_planes; i++) {
>  			reg = SPCNTR(pipe, i);
>  			val = I915_READ(reg);
>  			WARN((val & SP_ENABLE),
> @@ -10862,7 +10862,7 @@ void intel_modeset_init(struct drm_device *dev)
>  
>  	for_each_pipe(i) {
>  		intel_crtc_init(dev, i);
> -		for (j = 0; j < dev_priv->num_plane; j++) {
> +		for (j = 0; j < INTEL_INFO(dev)->num_planes; j++) {
>  			ret = intel_plane_init(dev, i, j);
>  			if (ret)
>  				DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n",
> -- 
> 1.8.3.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC

  reply	other threads:[~2013-12-12 11:40 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-12 11:20 Supporting fused display configurations v2 Damien Lespiau
2013-12-12 11:20 ` [PATCH 1/6] drm/i915: Make the intel_device_info structure kept in dev_priv writable Damien Lespiau
2013-12-12 11:42   ` Ville Syrjälä
2013-12-12 11:20 ` [PATCH 2/6] drm/i915: Move num_plane to the intel_device_info structure Damien Lespiau
2013-12-12 11:40   ` Ville Syrjälä [this message]
2013-12-12 11:21 ` [PATCH 3/6] drm/i915: Consolidate FUSE_STRAP in one set of defines Damien Lespiau
2013-12-12 11:21 ` [PATCH 4/6] drm/i915: Disable display when fused off Damien Lespiau
2013-12-12 11:21 ` [PATCH 5/6] drm/i915: Remove the Quanta special case Damien Lespiau
2013-12-12 11:21 ` [PATCH 6/6] drm/i915: Use I915_MAX_PIPES in the pipe/plane_to_crtc_mapping definitions Damien Lespiau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131212114032.GW10036@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=damien.lespiau@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox