From: Daniel Vetter <daniel@ffwll.ch>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: make fbdev initialization asynchronous v2
Date: Wed, 28 May 2014 23:40:47 +0200 [thread overview]
Message-ID: <20140528214047.GB14841@phenom.ffwll.local> (raw)
In-Reply-To: <1401313143-3175-1-git-send-email-jbarnes@virtuousgeek.org>
On Wed, May 28, 2014 at 02:39:03PM -0700, Jesse Barnes wrote:
> This gets us out of our init code and out to userspace quite a bit
> faster, but does open us up to some bugs given the state of our init
> time locking.
>
> v2: switch to async_schedule (Chris)
> check with lockdep, seems happy (Jesse)
> move hotplug enable flag set to fbdev_initial_config (Jesse)
>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
FBDEV=n and let userspace deal with probing?
-Daniel
> ---
> drivers/gpu/drm/i915/i915_dma.c | 6 ++----
> drivers/gpu/drm/i915/intel_drv.h | 9 +++++++--
> drivers/gpu/drm/i915/intel_fbdev.c | 9 +++++++--
> 3 files changed, 16 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index eedb023..8bbc289 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -28,6 +28,7 @@
>
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>
> +#include <linux/async.h>
> #include <drm/drmP.h>
> #include <drm/drm_crtc_helper.h>
> #include <drm/drm_fb_helper.h>
> @@ -1367,10 +1368,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
> * scanning against hotplug events. Hence do this first and ignore the
> * tiny window where we will loose hotplug notifactions.
> */
> - intel_fbdev_initial_config(dev);
> -
> - /* Only enable hotplug handling once the fbdev is fully set up. */
> - dev_priv->enable_hotplug_processing = true;
> + async_schedule(intel_fbdev_initial_config, dev_priv);
>
> drm_kms_helper_poll_init(dev);
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 328b1a7..a563a83 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -25,6 +25,7 @@
> #ifndef __INTEL_DRV_H__
> #define __INTEL_DRV_H__
>
> +#include <linux/async.h>
> #include <linux/i2c.h>
> #include <linux/hdmi.h>
> #include <drm/i915_drm.h>
> @@ -787,7 +788,7 @@ void intel_dvo_init(struct drm_device *dev);
> /* legacy fbdev emulation in intel_fbdev.c */
> #ifdef CONFIG_DRM_I915_FBDEV
> extern int intel_fbdev_init(struct drm_device *dev);
> -extern void intel_fbdev_initial_config(struct drm_device *dev);
> +extern void intel_fbdev_initial_config(void *data, async_cookie_t cookie);
> extern void intel_fbdev_fini(struct drm_device *dev);
> extern void intel_fbdev_set_suspend(struct drm_device *dev, int state);
> extern void intel_fbdev_output_poll_changed(struct drm_device *dev);
> @@ -798,8 +799,12 @@ static inline int intel_fbdev_init(struct drm_device *dev)
> return 0;
> }
>
> -static inline void intel_fbdev_initial_config(struct drm_device *dev)
> +static inline void intel_fbdev_initial_config(void *data, async_cookie_t cookie)
> {
> + struct drm_i915_private *dev_priv = data;
> +
> + /* Only enable hotplug handling once the fbdev is fully set up. */
> + dev_priv->enable_hotplug_processing = true;
> }
>
> static inline void intel_fbdev_fini(struct drm_device *dev)
> diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
> index f73ba5e..9e7e45b 100644
> --- a/drivers/gpu/drm/i915/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/intel_fbdev.c
> @@ -24,6 +24,7 @@
> * David Airlie
> */
>
> +#include <linux/async.h>
> #include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/errno.h>
> @@ -636,13 +637,16 @@ int intel_fbdev_init(struct drm_device *dev)
> return 0;
> }
>
> -void intel_fbdev_initial_config(struct drm_device *dev)
> +void intel_fbdev_initial_config(void *data, async_cookie_t cookie)
> {
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_private *dev_priv = data;
> struct intel_fbdev *ifbdev = dev_priv->fbdev;
>
> /* Due to peculiar init order wrt to hpd handling this is separate. */
> drm_fb_helper_initial_config(&ifbdev->helper, ifbdev->preferred_bpp);
> +
> + /* Only enable hotplug handling once the fbdev is fully set up. */
> + dev_priv->enable_hotplug_processing = true;
> }
>
> void intel_fbdev_fini(struct drm_device *dev)
> @@ -651,6 +655,7 @@ void intel_fbdev_fini(struct drm_device *dev)
> if (!dev_priv->fbdev)
> return;
>
> + async_synchronize_full();
> intel_fbdev_destroy(dev, dev_priv->fbdev);
> kfree(dev_priv->fbdev);
> dev_priv->fbdev = NULL;
> --
> 1.8.4.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
next prev parent reply other threads:[~2014-05-28 21:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-28 21:39 [PATCH] drm/i915: make fbdev initialization asynchronous v2 Jesse Barnes
2014-05-28 21:40 ` Daniel Vetter [this message]
2014-05-28 21:53 ` Jesse Barnes
2014-08-29 18:52 ` Chris Wilson
2014-08-29 19:35 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140528214047.GB14841@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).