[PATCH v6 02/12] drm/atomic: Add support for custom scaling mode properties, v2

[Maarten Lankhorst <maarten.lankhorst@linux.intel.com>]

Some connectors may not allow all scaling mode properties, this function will allow
creating the scaling mode property with only the supported subset. It also wires up
this state for atomic.

This will make it possible to convert i915 connectors to atomic.

Changes since v1:
 - Add DRM_MODE_PROP_ENUM flag to drm_property_create
 - Use the correct index in drm_property_add_enum.
 - Add DocBook for function (Sean Paul).
 - Warn if less than 2 valid scaling modes are passed.
 - Remove level of indent. (Sean Paul)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/drm_atomic.c    |  4 +++
 drivers/gpu/drm/drm_connector.c | 58 +++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h     | 10 +++++++
 3 files changed, 72 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 77bb36e956db..c7f91dcebbe9 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1125,6 +1125,8 @@ int drm_atomic_connector_set_property(struct drm_connector *connector,
 			state->link_status = val;
 	} else if (property == config->aspect_ratio_property) {
 		state->picture_aspect_ratio = val;
+	} else if (property == connector->scaling_mode_property) {
+		state->scaling_mode = val;
 	} else if (connector->funcs->atomic_set_property) {
 		return connector->funcs->atomic_set_property(connector,
 				state, property, val);
@@ -1203,6 +1205,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = state->link_status;
 	} else if (property == config->aspect_ratio_property) {
 		*val = state->picture_aspect_ratio;
+	} else if (property == connector->scaling_mode_property) {
+		*val = state->scaling_mode;
 	} else if (connector->funcs->atomic_get_property) {
 		return connector->funcs->atomic_get_property(connector,
 				state, property, val);
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 9f847615ac74..b3912f2e48c6 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -961,6 +961,64 @@ int drm_mode_create_scaling_mode_property(struct drm_device *dev)
 EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
 
 /**
+ * drm_mode_connector_attach_scaling_mode_property - attach atomic scaling mode property
+ * @connector: connector to attach scaling mode property on.
+ * @scaling_mode_mask: or'ed mask of BIT(DRM_MODE_SCALE_\*).
+ *
+ * This is used to add support for scaling mode to atomic drivers.
+ * The scaling mode will be set to &struct drm_connector_state->picture_aspect_ratio
+ * and can be used from &struct drm_connector_helper_funcs->atomic_check for validation.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_connector_attach_scaling_mode_property(struct drm_connector *connector,
+						    u32 scaling_mode_mask)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *scaling_mode_property;
+	int i, j = 0;
+	const unsigned valid_scaling_mode_mask =
+		(1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1;
+
+	if (WARN_ON(hweight32(scaling_mode_mask) < 2 ||
+	            scaling_mode_mask & ~valid_scaling_mode_mask))
+		return -EINVAL;
+
+	scaling_mode_property =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode",
+				    hweight32(scaling_mode_mask));
+
+	if (!scaling_mode_property)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++) {
+		int ret;
+
+		if (!(BIT(i) & scaling_mode_mask))
+			continue;
+
+		ret = drm_property_add_enum(scaling_mode_property, j++,
+					    drm_scaling_mode_enum_list[i].type,
+					    drm_scaling_mode_enum_list[i].name);
+
+		if (ret) {
+			drm_property_destroy(dev, scaling_mode_property);
+
+			return ret;
+		}
+	}
+
+	drm_object_attach_property(&connector->base,
+				   scaling_mode_property, 0);
+
+	connector->scaling_mode_property = scaling_mode_property;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_connector_attach_scaling_mode_property);
+
+/**
  * drm_mode_create_aspect_ratio_property - create aspect ratio property
  * @dev: DRM device
  *
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1ecf5f2619c0..e71b8959c15f 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -336,6 +336,12 @@ struct drm_connector_state {
 	 * values for &enum hdmi_picture_aspect
 	 */
 	enum hdmi_picture_aspect picture_aspect_ratio;
+
+	/**
+	 * @scaling_mode: Connector property to control the
+	 * upscaling, mostly used for built-in panels.
+	 */
+	unsigned int scaling_mode;
 };
 
 /**
@@ -764,6 +770,8 @@ struct drm_connector {
 	struct drm_property_blob *edid_blob_ptr;
 	struct drm_object_properties properties;
 
+	struct drm_property *scaling_mode_property;
+
 	/**
 	 * @path_blob_ptr:
 	 *
@@ -963,6 +971,8 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 				  unsigned int num_modes,
 				  const char * const modes[]);
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
+int drm_mode_connector_attach_scaling_mode_property(struct drm_connector *connector,
+						    u32 scaling_mode_mask);
 int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
 int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
 
-- 
2.9.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx