From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 4/4] drm/i915: Calculate vlv/chv intermediate watermarks correctly, v2.
Date: Wed, 3 May 2017 17:11:59 +0300 [thread overview]
Message-ID: <20170503141159.GM12629@intel.com> (raw)
In-Reply-To: <587a919a-52a9-ed40-9e18-e6da724be1b0@linux.intel.com>
On Wed, May 03, 2017 at 04:06:37PM +0200, Maarten Lankhorst wrote:
> Op 03-05-17 om 15:45 schreef Ville Syrjälä:
> > On Mon, May 01, 2017 at 03:34:34PM +0200, Maarten Lankhorst wrote:
> >> The watermarks it should calculate against are the old optimal watermarks.
> >> The currently active crtc watermarks are pure fiction, and are invalid in
> >> case of a nonblocking modeset, page flip enabling/disabling planes or any
> >> other reason.
> >>
> >> When the crtc is disabled or during a modeset the intermediate watermarks
> >> don't need to be programmed separately, and could be directly assigned
> >> to the optimal watermarks.
> >>
> >> Also rename crtc_state to new_crtc_state, to distinguish it from the old state.
> >>
> >> Changes since v1:
> >> - Use intel_atomic_get_old_crtc_state. (ville)
> >>
> >> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> >> ---
> >> drivers/gpu/drm/i915/intel_pm.c | 20 ++++++++++++++------
> >> 1 file changed, 14 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> >> index 0f344b1fff45..a09396ee1f3d 100644
> >> --- a/drivers/gpu/drm/i915/intel_pm.c
> >> +++ b/drivers/gpu/drm/i915/intel_pm.c
> >> @@ -1458,16 +1458,24 @@ static void vlv_atomic_update_fifo(struct intel_atomic_state *state,
> >>
> >> static int vlv_compute_intermediate_wm(struct drm_device *dev,
> >> struct intel_crtc *crtc,
> >> - struct intel_crtc_state *crtc_state)
> >> + struct intel_crtc_state *new_crtc_state)
> >> {
> >> - struct vlv_wm_state *intermediate = &crtc_state->wm.vlv.intermediate;
> >> - const struct vlv_wm_state *optimal = &crtc_state->wm.vlv.optimal;
> >> - const struct vlv_wm_state *active = &crtc->wm.active.vlv;
> >> + struct vlv_wm_state *intermediate = &new_crtc_state->wm.vlv.intermediate;
> >> + const struct vlv_wm_state *optimal = &new_crtc_state->wm.vlv.optimal;
> >> + const struct intel_crtc_state *old_crtc_state =
> >> + intel_atomic_get_old_crtc_state(new_crtc_state->base.state, crtc);
> >> + const struct vlv_wm_state *active = &old_crtc_state->wm.vlv.optimal;
> >> int level;
> >>
> >> + if (!new_crtc_state->base.active || drm_atomic_crtc_needs_modeset(&new_crtc_state->base)) {
> >> + *intermediate = *optimal;
> >> +
> >> + return 0;
> >> + }
> >> +
> >> intermediate->num_levels = min(optimal->num_levels, active->num_levels);
> >> intermediate->cxsr = optimal->cxsr && active->cxsr &&
> >> - !crtc_state->disable_cxsr;
> >> + !new_crtc_state->disable_cxsr;
> > We need to consider disable_cxsr even in the modeset case.
> Why is this? crtc_state->disable_cxsr is set if any plane is part of the crtc during modeset, so it's disabled during modeset already.
It's set if any plane is enabling/disabling, which should be quite
typical during a modeset.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-05-03 14:12 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-01 13:34 [PATCH v2 0/4] drm/i915: Calculate intermediate watermarks correctly Maarten Lankhorst
2017-05-01 13:34 ` [PATCH v2 1/4] drm/i915: Change use get_new_plane_state instead of existing plane state Maarten Lankhorst
2017-05-03 13:45 ` Ville Syrjälä
2017-05-01 13:34 ` [PATCH v2 2/4] drm/i915: Change get_existing_crtc_state to old state Maarten Lankhorst
2017-05-03 13:46 ` Ville Syrjälä
2017-05-01 13:34 ` [PATCH v2 3/4] drm/i915: Calculate ironlake intermediate watermarks correctly, v2 Maarten Lankhorst
2017-05-03 13:48 ` Ville Syrjälä
2017-05-01 13:34 ` [PATCH v2 4/4] drm/i915: Calculate vlv/chv " Maarten Lankhorst
2017-05-03 13:45 ` Ville Syrjälä
2017-05-03 14:06 ` Maarten Lankhorst
2017-05-03 14:11 ` Ville Syrjälä [this message]
2017-05-03 15:53 ` Maarten Lankhorst
2017-05-03 16:07 ` Ville Syrjälä
2017-05-03 16:18 ` Maarten Lankhorst
2017-05-03 18:03 ` Ville Syrjälä
2017-05-03 20:28 ` Maarten Lankhorst
2017-05-04 8:12 ` Maarten Lankhorst
2017-05-04 10:56 ` Ville Syrjälä
2017-05-01 13:53 ` ✓ Fi.CI.BAT: success for drm/i915: Calculate intermediate watermarks correctly Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170503141159.GM12629@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox