Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Display WA #1185 WaDisableDARBFClkGating:cnl, glk
Date: Fri, 10 Nov 2017 23:11:01 +0200	[thread overview]
Message-ID: <20171110211101.GK10981@intel.com> (raw)
In-Reply-To: <20171110205850.10793-1-rodrigo.vivi@intel.com>

On Fri, Nov 10, 2017 at 12:58:50PM -0800, Rodrigo Vivi wrote:
> Display is not sending a PMRsp when a PMReq is received
> at the same time that all planes are turned off.
> State machine in the dcprunit is stuck in the WAIT4DONE
> state which means that there is no fill_done.
> 
> WA: disable arbiter clock gating, set bit [27] of 0x46530
> 
> v2: As Ville pointed out, based on the description the issue
>     can happen when disabling the planes, similar to
>     WaRsPkgCStateDisplayPMReq:hsw
>     Also description of the issue was updated on commit
>     message to make it more clear that we need this
>     earlier.
> v3: Restore comment about possibility to system hang
>     to where we are sure about it, without speculation. (Ville).
> 
> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

^ double sob

The dangers of adding tags below your sob line and using -s...

> ---
>  drivers/gpu/drm/i915/i915_reg.h      |  1 +
>  drivers/gpu/drm/i915/intel_display.c | 24 +++++++++++++++---------
>  2 files changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 6ef33422f762..fc8c5f8260f6 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3819,6 +3819,7 @@ enum {
>   * GEN9 clock gating regs
>   */
>  #define GEN9_CLKGATE_DIS_0		_MMIO(0x46530)
> +#define   DARBF_GATING_DIS		(1 << 27)
>  #define   PWM2_GATING_DIS		(1 << 14)
>  #define   PWM1_GATING_DIS		(1 << 13)
>  
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 5c7540f3f5dc..282a4664a517 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -15081,6 +15081,20 @@ get_encoder_power_domains(struct drm_i915_private *dev_priv)
>  	}
>  }
>  
> +/* System hang if this isn't done before disabling all planes! */
> +static void intel_early_display_was(struct drm_i915_private *dev_priv)
> +{
> +	/* Display WA #1185 WaDisableDARBFClkGating:cnl,glk */
> +	if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
> +		I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
> +			   DARBF_GATING_DIS);
> +
> +	/* WaRsPkgCStateDisplayPMReq:hsw */
> +	if (IS_HASWELL(dev_priv))
> +		I915_WRITE(CHICKEN_PAR1_1,
> +			   I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
> +}
> +
>  /* Scan out the current hw modeset state,
>   * and sanitizes it to the current state
>   */
> @@ -15094,15 +15108,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev,
>  	struct intel_encoder *encoder;
>  	int i;
>  
> -	if (IS_HASWELL(dev_priv)) {
> -		/*
> -		 * WaRsPkgCStateDisplayPMReq:hsw
> -		 * System hang if this isn't done before disabling all planes!
> -		 */
> -		I915_WRITE(CHICKEN_PAR1_1,
> -			   I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
> -	}
> -
> +	intel_early_display_was(dev_priv);
>  	intel_modeset_readout_hw_state(dev);
>  
>  	/* HW state is read out, now we need to sanitize this mess. */
> -- 
> 2.13.6

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-11-10 21:11 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-08 23:30 [PATCH] drm/i915: Display WA #1185 WaDisableDARBFClkGating:cnl, glk Rodrigo Vivi
2017-11-08 23:48 ` ✗ Fi.CI.BAT: warning for " Patchwork
2017-11-09  0:31 ` ✗ Fi.CI.IGT: failure " Patchwork
2017-11-09  0:55 ` ✓ Fi.CI.BAT: success " Patchwork
2017-11-09  1:31 ` ✗ Fi.CI.BAT: warning " Patchwork
2017-11-09 13:20 ` [PATCH] " Imre Deak
2017-11-09 13:45 ` Ville Syrjälä
2017-11-09 17:58   ` Rodrigo Vivi
2017-11-09 18:05     ` Chris Wilson
2017-11-09 22:26   ` Rodrigo Vivi
2017-11-10 20:13     ` Ville Syrjälä
2017-11-10 20:24       ` Rodrigo Vivi
2017-11-10 20:44         ` Ville Syrjälä
2017-11-10 20:58           ` Rodrigo Vivi
2017-11-10 21:11             ` Ville Syrjälä [this message]
2017-11-10 21:17               ` Rodrigo Vivi
2017-11-11  0:03               ` Rodrigo Vivi
2017-11-09 22:43 ` ✓ Fi.CI.BAT: success for drm/i915: Display WA #1185 WaDisableDARBFClkGating:cnl, glk (rev2) Patchwork
2017-11-09 23:25 ` ✗ Fi.CI.IGT: failure " Patchwork
2017-11-10 21:18 ` ✓ Fi.CI.BAT: success for drm/i915: Display WA #1185 WaDisableDARBFClkGating:cnl, glk (rev3) Patchwork
2017-11-10 23:00 ` ✓ Fi.CI.IGT: " Patchwork
2017-11-11  0:22 ` ✗ Fi.CI.BAT: warning for drm/i915: Display WA #1185 WaDisableDARBFClkGating:cnl, glk (rev4) Patchwork
2017-11-13 23:01 ` ✗ Fi.CI.BAT: failure " Patchwork
2017-11-14  0:38 ` ✓ Fi.CI.BAT: success " Patchwork
2017-11-14  1:31 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171110211101.GK10981@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox