Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Subject: [PATCH i-g-t v2][CI] tests/psr: Test vblank continuity with PSR enabled
Date: Wed, 13 Dec 2017 11:23:45 -0800	[thread overview]
Message-ID: <20171213192345.5558-1-dhinakaran.pandiyan@intel.com> (raw)

PSR allows DMC to put the system to low power states when active, but
this can reset the frame counter on some platforms. The frame counter reset
leads to a negative diff applied to vblank count. This subtest checks
for that.

v2: Some optimizations and data type changes.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
---
 tests/intel-ci/fast-feedback.testlist |  1 +
 tests/kms_psr_sink_crc.c              | 66 +++++++++++++++++++++++++++++++++++
 2 files changed, 67 insertions(+)

diff --git a/tests/intel-ci/fast-feedback.testlist b/tests/intel-ci/fast-feedback.testlist
index f71a16bc..72338b72 100644
--- a/tests/intel-ci/fast-feedback.testlist
+++ b/tests/intel-ci/fast-feedback.testlist
@@ -247,6 +247,7 @@ igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a
 igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b
 igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c
 igt@kms_psr_sink_crc@psr_basic
+igt@kms_psr_sink_crc@vblank
 igt@kms_setmode@basic-clone-single-crtc
 igt@kms_sink_crc_basic
 igt@pm_backlight@basic-brightness
diff --git a/tests/kms_psr_sink_crc.c b/tests/kms_psr_sink_crc.c
index 83a69f0b..831368b2 100644
--- a/tests/kms_psr_sink_crc.c
+++ b/tests/kms_psr_sink_crc.c
@@ -69,6 +69,7 @@ typedef struct {
 	enum operations op;
 	uint32_t devid;
 	uint32_t crtc_id;
+	enum pipe pipe;
 	igt_display_t display;
 	drm_intel_bufmgr *bufmgr;
 	struct igt_fb fb_green, fb_white;
@@ -107,6 +108,7 @@ static void setup_output(data_t *data)
 		if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
 			continue;
 
+		data->pipe = pipe;
 		igt_output_set_pipe(output, pipe);
 		data->crtc_id = output->config.crtc->crtc_id;
 		data->output = output;
@@ -285,6 +287,63 @@ static void assert_or_manual(bool condition, const char *expected)
 	igt_assert(igt_interactive_debug || condition);
 }
 
+static unsigned int get_vblank(int fd, unsigned int pipe)
+{
+	union drm_wait_vblank vbl;
+
+	memset(&vbl, 0, sizeof(vbl));
+	vbl.request.type = DRM_VBLANK_RELATIVE | kmstest_get_vbl_flag(pipe);
+	igt_ioctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl);
+
+	return vbl.reply.sequence;
+}
+
+static void dmc_read_counts(unsigned int fd, unsigned int *count)
+{
+	char buf[512];
+
+	igt_debugfs_read(fd, "i915_dmc_info", buf);
+	igt_assert_eq(sscanf(strstr(buf, "DC3 -> DC5"), "DC3 -> DC5 count: %u", &count[0]),
+		      1);
+	igt_assert_eq(sscanf(strstr(buf, "DC5 -> DC6"), "DC5 -> DC6 count: %u", &count[1]),
+		      1);
+	igt_debug("DC3->DC5 count=%u, DC5->DC6 count=%u\n", count[0], count[1]);
+}
+
+static void check_vblanks(data_t *data)
+{
+	unsigned int first_vbl, second_vbl;
+	int wait = 30; /* Takes about 2.5 seconds for DC_OFF disable */
+	char buf[512];
+	bool has_dmc;
+
+	first_vbl = get_vblank(data->drm_fd, data->pipe);
+
+	igt_debugfs_read(data->drm_fd, "i915_dmc_info", buf);
+	has_dmc = strstr(buf, "fw loaded: yes");
+
+	if (has_dmc) {
+		unsigned int new_dc[2], old_dc[2];
+
+		dmc_read_counts(data->drm_fd, new_dc);
+		do {
+			memcpy(old_dc, new_dc, sizeof(new_dc));
+			usleep(100 * 1000);
+			dmc_read_counts(data->drm_fd, new_dc);
+		} while (!memcmp(old_dc, new_dc, sizeof(new_dc)) && --wait);
+
+		igt_assert_f(wait, "Timed out waiting for DC state transition 3s.\n");
+	} else {
+		sleep(3);
+	}
+
+	second_vbl = get_vblank(data->drm_fd, data->pipe);
+	igt_debug("vblank count went from %u to %u in %d ms.\n",
+		  first_vbl, second_vbl, has_dmc ? (30 - wait) * 100 : 3000);
+
+	igt_assert_lt(first_vbl, second_vbl);
+}
+
 static bool drrs_disabled(data_t *data)
 {
 	char buf[512];
@@ -572,6 +631,13 @@ int main(int argc, char *argv[])
 		}
 	}
 
+	igt_subtest("vblank") {
+		setup_test_plane(&data);
+		igt_assert(wait_psr_entry(&data));
+		check_vblanks(&data);
+		test_cleanup(&data);
+	}
+
 	igt_subtest_f("dpms_off_psr_active") {
 		data.test_plane = DRM_PLANE_TYPE_PRIMARY;
 		data.op = RENDER;
-- 
2.11.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2017-12-13 19:23 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-13 19:23 Dhinakaran Pandiyan [this message]
2017-12-13 19:56 ` ✗ Fi.CI.BAT: failure for tests/psr: Test vblank continuity with PSR enabled Patchwork
2017-12-19 21:54 ` [PATCH i-g-t v2][CI] " Rodrigo Vivi
2017-12-19 22:02   ` Pandiyan, Dhinakaran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171213192345.5558-1-dhinakaran.pandiyan@intel.com \
    --to=dhinakaran.pandiyan@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox