From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 4/4] drm/i915: Enable display workaround 827 for all planes.
Date: Mon, 9 Apr 2018 16:11:11 +0300 [thread overview]
Message-ID: <20180409131111.GI17795@intel.com> (raw)
In-Reply-To: <20180409124656.39886-4-maarten.lankhorst@linux.intel.com>
On Mon, Apr 09, 2018 at 02:46:56PM +0200, Maarten Lankhorst wrote:
> The workaround was applied only to the primary plane, but is required
> on all planes. Iterate over all planes in the crtc atomic check to see
> if the workaround is enabled, and only perform the actual toggling in
> the pre/post plane update functions.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 40 +++++++++++++++++++++---------------
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> 2 files changed, 24 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 487a6e235222..829b593a3cee 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5162,7 +5162,6 @@ static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
> if (old_primary_state) {
> struct drm_plane_state *new_primary_state =
> drm_atomic_get_new_plane_state(old_state, primary);
> - struct drm_framebuffer *fb = new_primary_state->fb;
>
> intel_fbc_post_update(crtc);
>
> @@ -5170,15 +5169,11 @@ static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
> (needs_modeset(&pipe_config->base) ||
> !old_primary_state->visible))
> intel_post_enable_primary(&crtc->base, pipe_config);
> -
> - /* Display WA 827 */
> - if ((INTEL_GEN(dev_priv) == 9 && !IS_GEMINILAKE(dev_priv)) ||
> - IS_CANNONLAKE(dev_priv)) {
> - if (fb && fb->format->format == DRM_FORMAT_NV12)
> - skl_wa_clkgate(dev_priv, crtc->pipe, false);
> - }
> -
> }
> +
> + /* Display WA 827 */
> + if (old_crtc_state->nv12_wa && !pipe_config->nv12_wa)
> + skl_wa_clkgate(dev_priv, crtc->pipe, false);
> }
>
> static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
> @@ -5202,14 +5197,6 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
> struct intel_plane_state *new_primary_state =
> intel_atomic_get_new_plane_state(old_intel_state,
> to_intel_plane(primary));
> - struct drm_framebuffer *fb = new_primary_state->base.fb;
> -
> - /* Display WA 827 */
> - if ((INTEL_GEN(dev_priv) == 9 && !IS_GEMINILAKE(dev_priv)) ||
> - IS_CANNONLAKE(dev_priv)) {
> - if (fb && fb->format->format == DRM_FORMAT_NV12)
> - skl_wa_clkgate(dev_priv, crtc->pipe, true);
> - }
>
> intel_fbc_pre_update(crtc, pipe_config, new_primary_state);
> /*
> @@ -5221,6 +5208,10 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
> intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);
> }
>
> + /* Display WA 827 */
> + if (!old_crtc_state->nv12_wa && pipe_config->nv12_wa)
> + skl_wa_clkgate(dev_priv, crtc->pipe, true);
> +
> /*
> * Vblank time updates from the shadow to live plane control register
> * are blocked if the memory self-refresh mode is active at that
> @@ -10485,6 +10476,21 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
> return ret;
> }
>
> + pipe_config->nv12_wa = false;
> +
> + /* Apply display WA 827 if required. */
> + if (crtc_state->active &&
> + ((INTEL_GEN(dev_priv) == 9 && !IS_GEMINILAKE(dev_priv)) ||
> + IS_CANNONLAKE(dev_priv))) {
GLK doesn't need this? That seems odd to say the least.
> + struct drm_plane *plane;
> + const struct drm_plane_state *plane_state;
> +
> + drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, crtc_state)
I'd prefer a bitmask instead of that sneaky peeking of the plane states.
It should also avoid polluting this sort of central/generic piece of
code with platform specific w/as.
> + if (plane_state->fb &&
> + plane_state->fb->format->format == DRM_FORMAT_NV12)
> + pipe_config->nv12_wa = true;
> + }
> +
> if (crtc_state->color_mgmt_changed) {
> ret = intel_color_check(crtc, crtc_state);
> if (ret)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 9969309132d0..9c2b7f78d5dd 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -723,6 +723,7 @@ struct intel_crtc_state {
> bool update_wm_pre, update_wm_post; /* watermarks are updated */
> bool fb_changed; /* fb on any of the planes is changed */
> bool fifo_changed; /* FIFO split is changed */
> + bool nv12_wa; /* Whether display WA 827 needs to be enabled. */
>
> /* Pipe source size (ie. panel fitter input size)
> * All planes will be positioned inside this space,
> --
> 2.16.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-04-09 13:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-09 12:46 [PATCH 1/4] drm/i915: Change use get_new_plane_state instead of existing plane state Maarten Lankhorst
2018-04-09 12:46 ` [PATCH 2/4] drm/i915: Remove get_existing_crtc_state Maarten Lankhorst
2018-04-09 12:57 ` Ville Syrjälä
2018-04-09 12:46 ` [PATCH 3/4] drm/i915: Remove last references to drm_atomic_get_existing* macros Maarten Lankhorst
2018-04-09 13:04 ` Ville Syrjälä
2018-04-09 14:04 ` Maarten Lankhorst
2018-04-09 12:46 ` [PATCH 4/4] drm/i915: Enable display workaround 827 for all planes Maarten Lankhorst
2018-04-09 13:11 ` Ville Syrjälä [this message]
2018-04-09 12:57 ` [PATCH 1/4] drm/i915: Change use get_new_plane_state instead of existing plane state Ville Syrjälä
2018-04-09 14:01 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/4] " Patchwork
2018-04-09 14:16 ` ✓ Fi.CI.BAT: success " Patchwork
2018-04-09 17:30 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180409131111.GI17795@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox