From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: remove check for aux irq
Date: Wed, 25 Apr 2018 16:24:42 -0700 [thread overview]
Message-ID: <20180425232442.GD3617@intel.com> (raw)
In-Reply-To: <20180425215524.27613-1-lucas.demarchi@intel.com>
On Wed, Apr 25, 2018 at 02:55:24PM -0700, Lucas De Marchi wrote:
> This became dead code with commit 309bd8ed464f ("drm/i915: Reinstate
> GMBUS and AUX interrupts on gen4/g4x").
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 3 +--
> drivers/gpu/drm/i915/intel_dp.c | 22 +++++++---------------
> drivers/gpu/drm/i915/intel_drv.h | 1 -
> drivers/gpu/drm/i915/intel_psr.c | 2 +-
> 4 files changed, 9 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 8444ca8d5aa3..09e1c2289ea1 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2545,7 +2545,7 @@ intel_info(const struct drm_i915_private *dev_priv)
> IS_SKL_GT3(dev_priv) || IS_SKL_GT4(dev_priv))
>
> /*
> - * dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts
> + * gmbus irq on gen4 seems to be able to generate legacy interrupts
> * even when in MSI mode. This results in spurious interrupt warnings if the
> * legacy irq no. is shared with another device. The kernel then disables that
> * interrupt source and so prevents the other device from working properly.
> @@ -2553,7 +2553,6 @@ intel_info(const struct drm_i915_private *dev_priv)
> * Since we don't enable MSI anymore on gen4, we can always use GMBUS/AUX
> * interrupts.
> */
> -#define HAS_AUX_IRQ(dev_priv) true
> #define HAS_GMBUS_IRQ(dev_priv) (INTEL_GEN(dev_priv) >= 4)
>
> /* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 62f82c4298ac..fd417473b6a9 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -936,7 +936,7 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
> }
>
> static uint32_t
> -intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
> +intel_dp_aux_wait_done(struct intel_dp *intel_dp)
> {
> struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp));
> i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp);
> @@ -944,14 +944,10 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
> bool done;
>
> #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
> - if (has_aux_irq)
> - done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
> - msecs_to_jiffies_timeout(10));
> - else
> - done = wait_for(C, 10) == 0;
> + done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
> + msecs_to_jiffies_timeout(10));
> if (!done)
> - DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
> - has_aux_irq);
> + DRM_ERROR("dp aux hw did not signal timeout!\n");
> #undef C
>
> return status;
> @@ -1016,7 +1012,6 @@ static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
> }
>
> static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
> - bool has_aux_irq,
> int send_bytes,
> uint32_t aux_clock_divider)
> {
> @@ -1037,7 +1032,7 @@ static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
>
> return DP_AUX_CH_CTL_SEND_BUSY |
> DP_AUX_CH_CTL_DONE |
> - (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
> + DP_AUX_CH_CTL_INTERRUPT |
> DP_AUX_CH_CTL_TIME_OUT_ERROR |
> timeout |
> DP_AUX_CH_CTL_RECEIVE_ERROR |
> @@ -1047,13 +1042,12 @@ static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
> }
>
> static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
> - bool has_aux_irq,
> int send_bytes,
> uint32_t unused)
> {
> return DP_AUX_CH_CTL_SEND_BUSY |
> DP_AUX_CH_CTL_DONE |
> - (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
> + DP_AUX_CH_CTL_INTERRUPT |
> DP_AUX_CH_CTL_TIME_OUT_ERROR |
> DP_AUX_CH_CTL_TIME_OUT_MAX |
> DP_AUX_CH_CTL_RECEIVE_ERROR |
> @@ -1076,7 +1070,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> int i, ret, recv_bytes;
> uint32_t status;
> int try, clock = 0;
> - bool has_aux_irq = HAS_AUX_IRQ(dev_priv);
> bool vdd;
>
> ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp);
> @@ -1131,7 +1124,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
>
> while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
> u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
> - has_aux_irq,
> send_bytes,
> aux_clock_divider);
>
> @@ -1148,7 +1140,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
> /* Send the command and wait for it to complete */
> I915_WRITE(ch_ctl, send_ctl);
>
> - status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
> + status = intel_dp_aux_wait_done(intel_dp);
>
> /* Clear done status and any errors */
> I915_WRITE(ch_ctl,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 9bba0354ccd3..7cc5deed9511 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1135,7 +1135,6 @@ struct intel_dp {
> * register with to kick off an AUX transaction.
> */
> uint32_t (*get_aux_send_ctl)(struct intel_dp *dp,
> - bool has_aux_irq,
> int send_bytes,
> uint32_t aux_clock_divider);
>
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index 0d548292dd09..fd348f1b53ef 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -328,7 +328,7 @@ static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
> aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
>
> /* Start with bits set for DDI_AUX_CTL register */
> - aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, 0, sizeof(aux_msg),
> + aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, sizeof(aux_msg),
> aux_clock_divider);
>
> /* Select only valid bits for SRD_AUX_CTL */
> --
> 2.14.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-04-25 23:24 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-25 21:55 [PATCH] drm/i915: remove check for aux irq Lucas De Marchi
2018-04-25 22:11 ` ✗ Fi.CI.SPARSE: warning for " Patchwork
2018-04-25 22:28 ` ✓ Fi.CI.BAT: success " Patchwork
2018-04-25 23:24 ` Rodrigo Vivi [this message]
2018-04-26 2:45 ` ✓ Fi.CI.IGT: " Patchwork
2018-04-26 13:43 ` [PATCH] " Ville Syrjälä
2018-04-26 15:22 ` Lucas De Marchi
2018-04-26 15:27 ` Ville Syrjälä
2018-04-26 15:42 ` Lucas De Marchi
2018-04-26 15:50 ` Ville Syrjälä
2018-04-30 22:05 ` Lucas De Marchi
2018-05-02 12:07 ` Ville Syrjälä
2018-05-23 18:04 ` [PATCH v2] " Lucas De Marchi
2018-06-15 17:58 ` Ville Syrjälä
2018-06-15 21:51 ` Lucas De Marchi
2018-06-19 14:02 ` Ville Syrjälä
2018-06-19 15:24 ` Lucas De Marchi
2018-06-19 20:17 ` Dhinakaran Pandiyan
2018-06-21 17:04 ` Lucas De Marchi
2018-06-21 19:37 ` Dhinakaran Pandiyan
2018-06-21 16:01 ` Ville Syrjälä
2018-04-30 22:17 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: remove check for aux irq (rev2) Patchwork
2018-04-30 22:18 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-04-30 22:35 ` ✓ Fi.CI.BAT: success " Patchwork
2018-05-01 0:54 ` ✓ Fi.CI.IGT: " Patchwork
2018-05-23 18:13 ` ✗ Fi.CI.SPARSE: warning for drm/i915: remove check for aux irq (rev3) Patchwork
2018-05-23 18:28 ` ✓ Fi.CI.BAT: success " Patchwork
2018-05-23 22:38 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180425232442.GD3617@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lucas.demarchi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox