Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Fritz Koenig <frkoenig@google.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Reject NV12 planes with odd width/start position
Date: Fri, 18 May 2018 17:15:18 +0300	[thread overview]
Message-ID: <20180518141518.GA23723@intel.com> (raw)
In-Reply-To: <20180518122526.GS23723@intel.com>

On Fri, May 18, 2018 at 03:25:26PM +0300, Ville Syrjälä wrote:
> On Thu, May 17, 2018 at 12:07:14PM -0700, Fritz Koenig wrote:
> > Planes with an odd width will appear to have an incorrect
> > stride. When the start position is odd the controller
> > can lock up.
> 
> Just remove the strange NV12 check from the %2 checks in
> intel_check_sprite_plane()?

Hmm. Actually that wouldn't help the "primary" plane. I guess we want to
put this check into skl_check_nv12_surface() until we have a better
place for it, or until someone fixes the initial phase stuff to actually
handle this correctly.

> 
> > 
> > Signed-off-by: Fritz Koenig <frkoenig@google.com>
> > ---
> > 
> > Hi,
> > 
> > This appears to be a limitation of the hardware that is not being
> > checked. Is this supported and am I not enabling it correctly?
> > 
> > 
> >  drivers/gpu/drm/i915/intel_atomic_plane.c | 15 +++++++++++++++
> >  1 file changed, 15 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
> > index 7481ce85746b..ca4553592ab9 100644
> > --- a/drivers/gpu/drm/i915/intel_atomic_plane.c
> > +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
> > @@ -188,6 +188,21 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_
> >  	else
> >  		crtc_state->active_planes &= ~BIT(intel_plane->id);
> >  
> > +	/*
> > +	 * NV12 plane is not allowed to start from an odd position or
> > +	 * end on an odd position.
> > +	 */
> > +	if (state->fb && (DRM_FORMAT_NV12 == state->fb->format->format)) {
> > +		if ((intel_state->base.src_w >> 16) & 1) {
> > +			DRM_DEBUG_KMS("Invalid Source: Yuv format does not support odd width\n");
> > +			return -EINVAL;
> > +		}
> > +		if ((intel_state->base.src_x >> 16) & 1) {
> > +			DRM_DEBUG_KMS("Invalid Source: Yuv format does not support odd x pos\n");
> > +			return -EINVAL;
> > +		}
> > +	}
> > +
> >  	return intel_plane_atomic_calc_changes(old_crtc_state,
> >  					       &crtc_state->base,
> >  					       old_plane_state,
> > -- 
> > 2.17.0.441.gb46fe60e1d-goog
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-05-18 14:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-17 19:07 [PATCH] drm/i915: Reject NV12 planes with odd width/start position Fritz Koenig
2018-05-18 10:32 ` ✗ Fi.CI.BAT: failure for " Patchwork
2018-05-18 12:25 ` [PATCH] " Ville Syrjälä
2018-05-18 14:15   ` Ville Syrjälä [this message]
2018-05-18 17:10     ` Fritz Koenig
2018-05-18 14:20 ` Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180518141518.GA23723@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=frkoenig@google.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox