From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v6 5/5] drm/i915/psr: Enable CRC check in the static frame on the sink side
Date: Thu, 21 Jun 2018 14:39:46 -0700 [thread overview]
Message-ID: <20180621213946.22870-5-jose.souza@intel.com> (raw)
In-Reply-To: <20180621213946.22870-1-jose.souza@intel.com>
Sink can be configured to calculate the CRC over the static frame and
compare with the CRC calculated and transmited in the VSC SDP by
source, if there is a mismatch sink will do a short pulse in HPD
and set DP_PSR_LINK_CRC_ERROR in DP_PSR_ERROR_STATUS.
Spec: 7723
v6:
andling DP_PSR_LINK_CRC_ERROR here and remove "bdw+" from commit
message
v4:
patch moved to after 'drm/i915/psr: Avoid PSR exit max time timeout'
to avoid touch in 2 patches EDP_PSR_DEBUG.
v3:
disabling PSR instead of exiting on error
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_psr.c | 10 +++++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index caad19f5f557..43db91c19f52 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4044,6 +4044,7 @@ enum {
#define EDP_PSR_SKIP_AUX_EXIT (1 << 12)
#define EDP_PSR_TP1_TP2_SEL (0 << 11)
#define EDP_PSR_TP1_TP3_SEL (1 << 11)
+#define EDP_PSR_CRC_ENABLE (1 << 10) /* BDW+ */
#define EDP_PSR_TP2_TP3_TIME_500us (0 << 8)
#define EDP_PSR_TP2_TP3_TIME_100us (1 << 8)
#define EDP_PSR_TP2_TP3_TIME_2500us (2 << 8)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 11d728770196..bdb644268edb 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -360,6 +360,8 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
if (dev_priv->psr.link_standby)
dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
+ if (!dev_priv->psr.psr2_enabled && INTEL_GEN(dev_priv) >= 8)
+ dpcd_val |= DP_PSR_CRC_VERIFICATION;
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
@@ -415,6 +417,9 @@ static void hsw_activate_psr1(struct intel_dp *intel_dp)
else
val |= EDP_PSR_TP1_TP2_SEL;
+ if (INTEL_GEN(dev_priv) >= 8)
+ val |= EDP_PSR_CRC_ENABLE;
+
val |= I915_READ(EDP_PSR_CTL) & EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK;
I915_WRITE(EDP_PSR_CTL, val);
}
@@ -1012,7 +1017,8 @@ void intel_psr_short_pulse(struct intel_dp *intel_dp)
struct i915_psr *psr = &dev_priv->psr;
u8 val;
const u8 errors = DP_PSR_RFB_STORAGE_ERROR |
- DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR;
+ DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR |
+ DP_PSR_LINK_CRC_ERROR;
if (!CAN_PSR(dev_priv) || !intel_dp_is_edp(intel_dp))
return;
@@ -1041,6 +1047,8 @@ void intel_psr_short_pulse(struct intel_dp *intel_dp)
DRM_DEBUG_KMS("PSR RFB storage error, disabling PSR\n");
if (val & DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR)
DRM_DEBUG_KMS("PSR VSC SDP uncorrectable error, disabling PSR\n");
+ if (val & DP_PSR_LINK_CRC_ERROR)
+ DRM_ERROR("PSR Link CRC error, disabling PSR\n");
if (val & ~errors)
DRM_ERROR("PSR_ERROR_STATUS unhandled errors %x\n",
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-06-21 21:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-21 21:39 [PATCH v6 1/5] drm/i915/psr: Remove intel_crtc_state parameter from disable() José Roberto de Souza
2018-06-21 21:39 ` [PATCH v6 2/5] drm/i915/psr: Begin to handle PSR/PSR2 errors set by sink José Roberto de Souza
2018-06-21 21:39 ` [PATCH v6 3/5] drm/i915/psr: Handle PSR errors José Roberto de Souza
2018-06-21 21:39 ` [PATCH v6 4/5] drm/i915/psr: Avoid PSR exit max time timeout José Roberto de Souza
2018-06-21 21:39 ` José Roberto de Souza [this message]
2018-06-21 21:51 ` ✗ Fi.CI.SPARSE: warning for series starting with [v6,1/5] drm/i915/psr: Remove intel_crtc_state parameter from disable() Patchwork
2018-06-21 22:03 ` ✓ Fi.CI.BAT: success " Patchwork
2018-06-22 8:37 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180621213946.22870-5-jose.souza@intel.com \
--to=jose.souza@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox