From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 02/12] drm/i915: Use the spr/cur latencies on vlv/chv/g4x
Date: Wed, 10 Oct 2018 16:04:44 +0300 [thread overview]
Message-ID: <20181010130454.28557-3-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20181010130454.28557-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reduce the differences between the platforms by using the spr/cur
watermark latency values on gmch platforms as well. We'll also
print the wm latencies the same way as we do for ilk+.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 4 +-
drivers/gpu/drm/i915/intel_pm.c | 63 ++++++++++++++++++-----------
2 files changed, 41 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9e0cb995801f..35b4c49c9bca 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3873,7 +3873,7 @@ static int spr_wm_latency_open(struct inode *inode, struct file *file)
{
struct drm_i915_private *dev_priv = inode->i_private;
- if (HAS_GMCH_DISPLAY(dev_priv))
+ if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
return -ENODEV;
return single_open(file, spr_wm_latency_show, dev_priv);
@@ -3883,7 +3883,7 @@ static int cur_wm_latency_open(struct inode *inode, struct file *file)
{
struct drm_i915_private *dev_priv = inode->i_private;
- if (HAS_GMCH_DISPLAY(dev_priv))
+ if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
return -ENODEV;
return single_open(file, cur_wm_latency_show, dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f871a6f152c3..fe522ceae97a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -801,6 +801,27 @@ static int intel_wm_num_levels(struct drm_i915_private *dev_priv)
return dev_priv->wm.max_level + 1;
}
+static void intel_print_wm_latency(struct drm_i915_private *dev_priv,
+ const char *name,
+ const uint16_t wm[8])
+{
+ int level, max_level = ilk_wm_max_level(dev_priv);
+
+ for (level = 0; level <= max_level; level++) {
+ unsigned int latency = wm[level];
+
+ if (latency == 0) {
+ DRM_DEBUG_KMS("%s WM%d latency not provided\n",
+ name, level);
+ continue;
+ }
+
+ DRM_DEBUG_KMS("%s WM%d latency %u (%u.%u usec)\n",
+ name, level, wm[level],
+ latency / 10, latency % 10);
+ }
+}
+
static int intel_plane_wm_latency(struct intel_plane *plane,
int level)
{
@@ -809,9 +830,6 @@ static int intel_plane_wm_latency(struct intel_plane *plane,
if (INTEL_GEN(dev_priv) >= 9)
return dev_priv->wm.skl_latency[level];
- if (HAS_GMCH_DISPLAY(dev_priv))
- return dev_priv->wm.pri_latency[level];
-
switch (plane->id) {
case PLANE_PRIMARY:
return dev_priv->wm.pri_latency[level];
@@ -1066,6 +1084,15 @@ static void g4x_setup_wm_latency(struct drm_i915_private *dev_priv)
dev_priv->wm.pri_latency[G4X_WM_LEVEL_HPLL] = 350;
dev_priv->wm.max_level = G4X_WM_LEVEL_HPLL;
+
+ memcpy(dev_priv->wm.spr_latency, dev_priv->wm.pri_latency,
+ sizeof(dev_priv->wm.pri_latency));
+ memcpy(dev_priv->wm.cur_latency, dev_priv->wm.pri_latency,
+ sizeof(dev_priv->wm.pri_latency));
+
+ intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
+ intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
+ intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
}
static int g4x_plane_fifo_size(enum plane_id plane_id, int level)
@@ -1618,6 +1645,15 @@ static void vlv_setup_wm_latency(struct drm_i915_private *dev_priv)
dev_priv->wm.max_level = VLV_WM_LEVEL_DDR_DVFS;
}
+
+ memcpy(dev_priv->wm.spr_latency, dev_priv->wm.pri_latency,
+ sizeof(dev_priv->wm.pri_latency));
+ memcpy(dev_priv->wm.cur_latency, dev_priv->wm.pri_latency,
+ sizeof(dev_priv->wm.pri_latency));
+
+ intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
+ intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
+ intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
}
static uint16_t vlv_compute_wm_level(const struct intel_crtc_state *crtc_state,
@@ -2954,27 +2990,6 @@ int ilk_wm_max_level(const struct drm_i915_private *dev_priv)
return 2;
}
-static void intel_print_wm_latency(struct drm_i915_private *dev_priv,
- const char *name,
- const uint16_t wm[8])
-{
- int level, max_level = ilk_wm_max_level(dev_priv);
-
- for (level = 0; level <= max_level; level++) {
- unsigned int latency = wm[level];
-
- if (latency == 0) {
- DRM_DEBUG_KMS("%s WM%d latency not provided\n",
- name, level);
- continue;
- }
-
- DRM_DEBUG_KMS("%s WM%d latency %u (%u.%u usec)\n",
- name, level, wm[level],
- latency / 10, latency % 10);
- }
-}
-
static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv,
uint16_t wm[5], uint16_t min)
{
--
2.18.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-10-10 13:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-10 13:04 [PATCH 00/12] drm/i915: Clean up the wm mem latency stuff Ville Syrjala
2018-10-10 13:04 ` [PATCH 01/12] drm/i915: Store all wm memory latency values in .1 usec units Ville Syrjala
2018-10-10 13:12 ` Chris Wilson
2018-10-10 15:35 ` Ville Syrjälä
2018-10-26 18:14 ` [PATCH v2 " Ville Syrjala
2018-10-10 13:04 ` Ville Syrjala [this message]
2018-10-10 13:04 ` [PATCH 03/12] drm/i915: Eliminate skl_latency[] Ville Syrjala
2018-10-10 13:04 ` [PATCH 04/12] drm/i915: Add dev_priv->wm.num_levels and use it everywhere Ville Syrjala
2018-10-26 18:27 ` [PATCH v2 " Ville Syrjala
2018-10-10 13:04 ` [PATCH 05/12] drm/i915: Add DEFINE_SNPRINTF_ARRAY() Ville Syrjala
2018-10-11 12:14 ` Jani Nikula
2018-10-11 12:47 ` Ville Syrjälä
2018-10-11 16:07 ` Jani Nikula
2018-10-10 13:04 ` [PATCH 06/12] drm/i915: Make the WM memory latency print more compact Ville Syrjala
2018-10-10 13:04 ` [PATCH 07/12] drm/i915: Eliminate redundant ilk sprite/cursor wm fixup code Ville Syrjala
2018-10-10 13:04 ` [PATCH 08/12] drm/i915: Split skl+ and ilk+ read_wm_latency() Ville Syrjala
2018-10-26 18:45 ` [PATCH v2 " Ville Syrjala
2018-10-10 13:04 ` [PATCH 09/12] drm/i915: Sanitize wm latency values for ilk+ Ville Syrjala
2018-10-26 19:11 ` [PATCH v2 " Ville Syrjala
2018-10-10 13:04 ` [PATCH 10/12] drm/i915: Drop the funky ilk wm setup Ville Syrjala
2018-10-10 13:04 ` [PATCH 11/12] drm/i915: Allow LP3 watermarks on ILK Ville Syrjala
2018-10-10 13:04 ` [PATCH 12/12] drm/i915: Remove the remnants of the ilk+ LP0 wm hack Ville Syrjala
2018-10-10 14:34 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Clean up the wm mem latency stuff Patchwork
2018-10-10 14:38 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-10 14:50 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-10-26 18:17 ` ✗ Fi.CI.BAT: failure for drm/i915: Clean up the wm mem latency stuff (rev2) Patchwork
2018-10-26 18:37 ` ✗ Fi.CI.BAT: failure for drm/i915: Clean up the wm mem latency stuff (rev3) Patchwork
2018-10-26 19:01 ` ✗ Fi.CI.BAT: failure for drm/i915: Clean up the wm mem latency stuff (rev4) Patchwork
2018-10-26 19:29 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Clean up the wm mem latency stuff (rev5) Patchwork
2018-10-26 19:34 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-10-26 19:47 ` ✓ Fi.CI.BAT: success " Patchwork
2018-10-27 5:17 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181010130454.28557-3-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox