Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Manasi Navare <manasi.d.navare@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: Re: [PATCH v7 18/19] drm/i915/dsc: Enable and disable appropriate power wells for VDSC
Date: Fri, 2 Nov 2018 19:53:07 +0200	[thread overview]
Message-ID: <20181102175307.GZ9144@intel.com> (raw)
In-Reply-To: <20181102064659.8991-19-manasi.d.navare@intel.com>

On Thu, Nov 01, 2018 at 11:46:58PM -0700, Manasi Navare wrote:
> A separate power well 2 (PG2) is required for VDSC on eDP transcoder
> whereas all other transcoders use the power wells associated with the
> transcoders for VDSC.
> This patch adds a helper to obtain correct power domain depending on
> transcoder being used and enables/disables the power wells during
> VDSC enabling/disabling.
> 
> v3:
> * Call it intel_dsc_power_domain, add to
> intel_ddi_get_power_domains (Ville)
> v2:
> * Fix tabs, const crtc_state, fix comments (Ville)
> 
> Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c  |  3 ++-
>  drivers/gpu/drm/i915/intel_drv.h  |  2 ++
>  drivers/gpu/drm/i915/intel_vdsc.c | 25 +++++++++++++++++++++++++
>  3 files changed, 29 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index af12c15ed94f..c243bb3f2be9 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -2124,7 +2124,8 @@ static u64 intel_ddi_get_power_domains(struct intel_encoder *encoder,
>  	 */
>  	if (intel_crtc_has_dp_encoder(crtc_state) ||
>  	    intel_port_is_tc(dev_priv, encoder->port))
> -		domains |= BIT_ULL(intel_ddi_main_link_aux_domain(dig_port));
> +		domains |= BIT_ULL(intel_ddi_main_link_aux_domain(dig_port)) |
> +			BIT_ULL(intel_dsc_power_domain(crtc_state));

if (crtc_state->something)
	domains |= ...;

>  
>  	return domains;
>  }
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index e537561b3d40..2d41dff6eed1 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1859,6 +1859,8 @@ uint8_t intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp, int mode_clock,
>  /* intel_vdsc.c */
>  int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
>  				struct intel_crtc_state *pipe_config);
> +enum intel_display_power_domain
> +intel_dsc_power_domain(const struct intel_crtc_state *crtc_state);
>  
>  static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
>  {
> diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
> index 219dc1517c8a..9eae037a3b4d 100644
> --- a/drivers/gpu/drm/i915/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/intel_vdsc.c
> @@ -581,6 +581,24 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
>  	return 0;
>  }
>  
> +enum intel_display_power_domain
> +intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)
> +{
> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> +
> +	/*
> +	 * On ICL VDSC/joining for eDP transcoder uses a separate power well PW2
> +	 * This requires POWER_DOMAIN_TRANSCODER_EDP_VDSC power domain.
> +	 * For any other transcoder, VDSC/joining uses the power well associated
> +	 * with the pipe/transcoder in use. Hence another reference on the
> +	 * transcoder power domain will suffice.
> +	 */
> +	if (cpu_transcoder == TRANSCODER_EDP)
> +		return POWER_DOMAIN_TRANSCODER_EDP_VDSC;
> +	else
> +		return POWER_DOMAIN_TRANSCODER(cpu_transcoder);
> +}
> +
>  static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,
>  						const struct intel_crtc_state *crtc_state)
>  {
> @@ -1020,6 +1038,10 @@ void intel_dsc_enable(struct intel_encoder *encoder,
>  	if (!crtc_state->dsc_params.compression_enable)
>  		return;
>  
> +	/* Enable Power wells for VDSC/joining */
> +	intel_display_power_get(dev_priv,
> +				intel_dsc_power_domain(crtc_state));
> +
>  	intel_configure_pps_for_dsc_encoder(encoder, crtc_state);
>  
>  	intel_dp_write_dsc_pps_sdp(encoder, crtc_state);
> @@ -1072,4 +1094,7 @@ void intel_dsc_disable(const struct intel_crtc_state *old_crtc_state)
>  				  RIGHT_BRANCH_VDSC_ENABLE);
>  	I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
>  
> +	/* Disable Power wells for VDSC/joining */
> +	intel_display_power_put(dev_priv,
> +				intel_dsc_power_domain(old_crtc_state));
>  }
> -- 
> 2.18.0

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-11-02 17:53 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-02  6:46 [PATCH v7 00/19] DSC enabling remaining patches Manasi Navare
2018-11-02  6:46 ` [PATCH v7 01/19] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-02  6:46 ` [PATCH v7 02/19] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-11-02  6:46 ` [PATCH v7 03/19] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-11-02  6:46 ` [PATCH v7 04/19] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-02  6:46 ` [PATCH v7 05/19] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-02  6:46 ` [PATCH v7 06/19] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-02 17:51   ` Ville Syrjälä
2018-11-02  6:46 ` [PATCH v7 07/19] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-02 17:51   ` Ville Syrjälä
2018-11-02 20:35     ` Manasi Navare
2018-11-02  6:46 ` [PATCH v7 08/19] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-11-02  6:46 ` [PATCH v7 09/19] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-02 17:51   ` Ville Syrjälä
2018-11-02  6:46 ` [PATCH v7 10/19] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-02 17:52   ` Ville Syrjälä
2018-11-02  6:46 ` [PATCH v7 11/19] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-02  6:46 ` [PATCH v7 12/19] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-02  6:46 ` [PATCH v7 13/19] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-02 17:52   ` Ville Syrjälä
2018-11-02 21:07     ` Manasi Navare
2018-11-02  6:46 ` [PATCH v7 14/19] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-02  6:46 ` [PATCH v7 15/19] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-02  6:46 ` [PATCH v7 16/19] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-02  6:46 ` [PATCH v7 17/19] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-02  6:46 ` [PATCH v7 18/19] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-02 17:53   ` Ville Syrjälä [this message]
2018-11-02  6:46 ` [PATCH v7 19/19] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-11-02  6:59 ` ✗ Fi.CI.CHECKPATCH: warning for DSC enabling remaining patches Patchwork
2018-11-02  7:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-02  7:31 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-11-02 16:25 ` Patchwork
2018-11-02 18:06 ` [PATCH v7 00/19] " Ville Syrjälä
2018-11-02 19:51   ` Manasi Navare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181102175307.GZ9144@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=manasi.d.navare@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox