[PATCH 3/4] drm/i915/icl: Only grab TC ports when using it

["José Roberto de Souza" <jose.souza@intel.com>]

When suspending or unloading the driver, it needs to release the
TC ports so HW can change it state without wait for driver handshake.
Spec also state that if the port is not used by driver it should
release TC access, so here only grabbing control of the TC ports and
marking as unsafe when aux power is needed as have aux power well is
a requirement to have DDI enabled in TC ports, the pre_pll_enable and
post_pll_disable hooks takes care of getting and releasing it.

BSpec: 21750

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c         | 28 -------------
 drivers/gpu/drm/i915/intel_runtime_pm.c | 55 ++++++++++++++++++++++++-
 2 files changed, 54 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 52a54ef746af..d978127e7208 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5013,16 +5013,6 @@ static bool icl_tc_phy_connect(struct drm_i915_private *dev_priv,
 		return false;
 	}
 
-	/*
-	 * This function may be called many times in a row without an HPD event
-	 * in between, so try to avoid the write when we can.
-	 */
-	val = I915_READ(PORT_TX_DFLEXDPCSSS);
-	if (!(val & DP_PHY_MODE_STATUS_NOT_SAFE(tc_port))) {
-		val |= DP_PHY_MODE_STATUS_NOT_SAFE(tc_port);
-		I915_WRITE(PORT_TX_DFLEXDPCSSS, val);
-	}
-
 	/*
 	 * Now we have to re-check the live state, in case the port recently
 	 * became disconnected. Not necessary for legacy mode.
@@ -5044,24 +5034,6 @@ static bool icl_tc_phy_connect(struct drm_i915_private *dev_priv,
 static void icl_tc_phy_disconnect(struct drm_i915_private *dev_priv,
 				  struct intel_digital_port *dig_port)
 {
-	enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port->base.port);
-
-	if (dig_port->tc_type == TC_PORT_UNKNOWN)
-		return;
-
-	/*
-	 * TBT disconnection flow is read the live status, what was done in
-	 * caller.
-	 */
-	if (dig_port->tc_type == TC_PORT_TYPEC ||
-	    dig_port->tc_type == TC_PORT_LEGACY) {
-		u32 val;
-
-		val = I915_READ(PORT_TX_DFLEXDPCSSS);
-		val &= ~DP_PHY_MODE_STATUS_NOT_SAFE(tc_port);
-		I915_WRITE(PORT_TX_DFLEXDPCSSS, val);
-	}
-
 	dig_port->tc_type = TC_PORT_UNKNOWN;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 6c453366cd24..dab5f90646c4 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -465,6 +465,48 @@ icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
 	hsw_wait_for_power_well_disable(dev_priv, power_well);
 }
 
+static void icl_tc_grab_control(struct drm_i915_private *dev_priv,
+				enum aux_ch aux_ch, bool grab)
+{
+	struct drm_device *dev = &dev_priv->drm;
+	struct drm_connector_list_iter conn_iter;
+	struct drm_connector *connector;
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		struct intel_connector *intel_connector;
+		struct intel_encoder *intel_encoder;
+		struct intel_digital_port *dig_port;
+		enum tc_port tc_port;
+
+		intel_connector = to_intel_connector(connector);
+		if (!intel_connector->encoder)
+			continue;
+		intel_encoder = intel_connector->encoder;
+		dig_port = enc_to_dig_port(&intel_encoder->base);
+
+		if (!dig_port || dig_port->aux_ch != aux_ch)
+			continue;
+
+		tc_port = intel_port_to_tc(dev_priv, dig_port->base.port);
+
+		if (dig_port->tc_type == TC_PORT_TYPEC ||
+		    dig_port->tc_type == TC_PORT_LEGACY) {
+			u32 val;
+
+			val = I915_READ(PORT_TX_DFLEXDPCSSS);
+			if (grab)
+				val |= DP_PHY_MODE_STATUS_NOT_SAFE(tc_port);
+			else
+				val &= ~DP_PHY_MODE_STATUS_NOT_SAFE(tc_port);
+			I915_WRITE(PORT_TX_DFLEXDPCSSS, val);
+		}
+
+		break;
+	}
+	drm_connector_list_iter_end(&conn_iter);
+}
+
 #define ICL_AUX_PW_TO_CH(pw_idx)	\
 	((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A)
 
@@ -475,6 +517,8 @@ icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
 	enum aux_ch aux_ch = ICL_AUX_PW_TO_CH(power_well->desc->hsw.idx);
 	u32 val;
 
+	icl_tc_grab_control(dev_priv, aux_ch, true);
+
 	val = I915_READ(DP_AUX_CH_CTL(aux_ch));
 	val &= ~DP_AUX_CH_CTL_TBT_IO;
 	if (power_well->desc->hsw.is_tc_tbt)
@@ -484,6 +528,15 @@ icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
 	hsw_power_well_enable(dev_priv, power_well);
 }
 
+static void icl_tc_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
+					      struct i915_power_well *power_well)
+{
+	enum aux_ch aux_ch = ICL_AUX_PW_TO_CH(power_well->desc->hsw.idx);
+
+	icl_tc_grab_control(dev_priv, aux_ch, false);
+	hsw_power_well_disable(dev_priv, power_well);
+}
+
 /*
  * We should only use the power well if we explicitly asked the hardware to
  * enable it, so check if it's enabled and also check if we've requested it to
@@ -2754,7 +2807,7 @@ static const struct i915_power_well_ops icl_combo_phy_aux_power_well_ops = {
 static const struct i915_power_well_ops icl_tc_phy_aux_power_well_ops = {
 	.sync_hw = hsw_power_well_sync_hw,
 	.enable = icl_tc_phy_aux_power_well_enable,
-	.disable = hsw_power_well_disable,
+	.disable = icl_tc_phy_aux_power_well_disable,
 	.is_enabled = hsw_power_well_enabled,
 };
 
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx