From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH 1/2] drm/i915/ddi: Add more sanity check to the encoder HW readout
Date: Wed, 7 Nov 2018 22:08:35 +0200 [thread overview]
Message-ID: <20181107200836.10191-1-imre.deak@intel.com> (raw)
Check for reserved register field values and conflicting
transcoder->port mappings (both MST and non-MST mappings or multiple SST
mappings).
This is also needed for the next patch to determine if a port is in MST
mode during sanitization after HW readout.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 76 +++++++++++++++++++++++++++-------------
1 file changed, 52 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index ab9a36c4ba3b..abc51693eec9 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2005,24 +2005,24 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
return ret;
}
-bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
- enum pipe *pipe)
+static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
+ u8 *pipe_mask, bool *is_dp_mst)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
enum port port = encoder->port;
enum pipe p;
u32 tmp;
- bool ret;
+ u8 mst_pipe_mask;
+
+ *pipe_mask = 0;
+ *is_dp_mst = false;
if (!intel_display_power_get_if_enabled(dev_priv,
encoder->power_domain))
- return false;
-
- ret = false;
+ return;
tmp = I915_READ(DDI_BUF_CTL(port));
-
if (!(tmp & DDI_BUF_CTL_ENABLE))
goto out;
@@ -2030,44 +2030,58 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
+ default:
+ MISSING_CASE(tmp & TRANS_DDI_EDP_INPUT_MASK);
+ /* fallthrough */
case TRANS_DDI_EDP_INPUT_A_ON:
case TRANS_DDI_EDP_INPUT_A_ONOFF:
- *pipe = PIPE_A;
+ *pipe_mask = BIT(PIPE_A);
break;
case TRANS_DDI_EDP_INPUT_B_ONOFF:
- *pipe = PIPE_B;
+ *pipe_mask = BIT(PIPE_B);
break;
case TRANS_DDI_EDP_INPUT_C_ONOFF:
- *pipe = PIPE_C;
+ *pipe_mask = BIT(PIPE_C);
break;
}
- ret = true;
-
goto out;
}
+ mst_pipe_mask = 0;
for_each_pipe(dev_priv, p) {
- enum transcoder cpu_transcoder = (enum transcoder) p;
+ enum transcoder cpu_transcoder = (enum transcoder)p;
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
- if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(port)) {
- if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
- TRANS_DDI_MODE_SELECT_DP_MST)
- goto out;
+ if ((tmp & TRANS_DDI_PORT_MASK) != TRANS_DDI_SELECT_PORT(port))
+ continue;
- *pipe = p;
- ret = true;
+ if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
+ TRANS_DDI_MODE_SELECT_DP_MST)
+ mst_pipe_mask |= BIT(p);
- goto out;
- }
+ *pipe_mask |= BIT(p);
}
- DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port));
+ if (!*pipe_mask)
+ DRM_DEBUG_KMS("No pipe for ddi port %c found\n",
+ port_name(port));
+
+ if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) {
+ DRM_DEBUG_KMS("Multiple pipes for non DP-MST port %c (pipe_mask %02x)\n",
+ port_name(port), *pipe_mask);
+ *pipe_mask = BIT(ffs(*pipe_mask) - 1);
+ }
+
+ if (mst_pipe_mask && mst_pipe_mask != *pipe_mask)
+ DRM_DEBUG_KMS("Conflicting MST and non-MST encoders for port %c (pipe_mask %02x mst_pipe_mask %02x)\n",
+ port_name(port), *pipe_mask, mst_pipe_mask);
+ else
+ *is_dp_mst = mst_pipe_mask;
out:
- if (ret && IS_GEN9_LP(dev_priv)) {
+ if (*pipe_mask && IS_GEN9_LP(dev_priv)) {
tmp = I915_READ(BXT_PHY_CTL(port));
if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK |
BXT_PHY_LANE_POWERDOWN_ACK |
@@ -2077,8 +2091,22 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
}
intel_display_power_put(dev_priv, encoder->power_domain);
+}
- return ret;
+bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
+ enum pipe *pipe)
+{
+ u8 pipe_mask;
+ bool is_mst;
+
+ intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst);
+
+ if (is_mst || !pipe_mask)
+ return false;
+
+ *pipe = ffs(pipe_mask) - 1;
+
+ return true;
}
static inline enum intel_display_power_domain
--
2.13.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2018-11-07 20:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-07 20:08 Imre Deak [this message]
2018-11-07 20:08 ` [PATCH 2/2] drm/i915/icl: Fix PLL mapping sanitization for DP ports Imre Deak
2018-11-09 0:19 ` Clint Taylor
2018-11-07 20:39 ` ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915/ddi: Add more sanity check to the encoder HW readout Patchwork
2018-11-07 21:23 ` Imre Deak
2018-11-09 12:40 ` Imre Deak
2018-11-09 13:20 ` Peres, Martin
2018-11-09 0:09 ` ✓ Fi.CI.IGT: success " Patchwork
2018-11-09 13:44 ` Imre Deak
2018-11-09 14:00 ` Imre Deak
2018-11-09 13:25 ` ✓ Fi.CI.BAT: " Patchwork
2018-11-09 17:13 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181107200836.10191-1-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox