From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Uma Shankar <uma.shankar@intel.com>
Cc: intel-gfx@lists.freedesktop.org, ville.syrjala@intel.com,
maarten.lankhorst@intel.com, dri-devel@lists.freedesktop.org
Subject: Re: [v10 3/3] drm/i915: Attach colorspace property and enable modeset
Date: Fri, 1 Feb 2019 21:01:12 +0200 [thread overview]
Message-ID: <20190201190112.GC20097@intel.com> (raw)
In-Reply-To: <1548852866-32349-4-git-send-email-uma.shankar@intel.com>
On Wed, Jan 30, 2019 at 06:24:26PM +0530, Uma Shankar wrote:
> This patch attaches the colorspace connector property to the
> hdmi connector. Based on colorspace change, modeset will be
> triggered to switch to new colorspace.
>
> Based on colorspace property value create an infoframe
> with appropriate colorspace. This can be used to send an
> infoframe packet with proper colorspace value set which
> will help to enable wider color gamut like BT2020 on sink.
>
> This patch attaches and enables HDMI colorspace, DP will be
> taken care separately.
>
> v2: Merged the changes of creating infoframe as well to this
> patch as per Maarten's suggestion.
>
> v3: Addressed review comments from Shashank. Separated HDMI
> and DP colorspaces as suggested by Ville and Maarten.
>
> v4: Addressed Chris and Ville's review comments, and created a
> common colorspace property for DP and HDMI, filtered the list
> based on the colorspaces supported by the respective protocol
> standard. Handle the default case properly.
>
> v5: Merged the DP handling along with platform colorspace
> handling as per Shashank's comments.
>
> v6: Reverted to old design of exposing all colorspaces to
> userspace as per Ville's review comment
>
> v7: Fixed a checkpatch complaint, Addressed Maarten' review
> comment, updated the RB from Maarten and Jani's ack.
>
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> Acked-by: Jani Nikula <jani.nikula@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_atomic.c | 1 +
> drivers/gpu/drm/i915/intel_connector.c | 8 ++++++++
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> drivers/gpu/drm/i915/intel_hdmi.c | 25 +++++++++++++++++++++++++
> 4 files changed, 35 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index 16263ad..a4bb906 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -124,6 +124,7 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
> */
> if (new_conn_state->force_audio != old_conn_state->force_audio ||
> new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb ||
> + new_conn_state->base.colorspace != old_conn_state->base.colorspace ||
> new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio ||
> new_conn_state->base.content_type != old_conn_state->base.content_type ||
> new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode)
> diff --git a/drivers/gpu/drm/i915/intel_connector.c b/drivers/gpu/drm/i915/intel_connector.c
> index ee16758..8352d0b 100644
> --- a/drivers/gpu/drm/i915/intel_connector.c
> +++ b/drivers/gpu/drm/i915/intel_connector.c
> @@ -265,3 +265,11 @@ int intel_ddc_get_modes(struct drm_connector *connector,
> connector->dev->mode_config.aspect_ratio_property,
> DRM_MODE_PICTURE_ASPECT_NONE);
> }
> +
> +void
> +intel_attach_colorspace_property(struct drm_connector *connector)
> +{
> + if (!drm_mode_create_colorspace_property(connector))
> + drm_object_attach_property(&connector->base,
> + connector->colorspace_property, 0);
> +}
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 85b913e..5178a9a 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1783,6 +1783,7 @@ int intel_connector_update_modes(struct drm_connector *connector,
> void intel_attach_force_audio_property(struct drm_connector *connector);
> void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
> void intel_attach_aspect_ratio_property(struct drm_connector *connector);
> +void intel_attach_colorspace_property(struct drm_connector *connector);
>
> /* intel_csr.c */
> void intel_csr_ucode_init(struct drm_i915_private *);
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 97a98e1..5c5009d 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -498,6 +498,24 @@ static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder,
> else
> frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>
> + if (conn_state->colorspace == DRM_MODE_COLORIMETRY_DEFAULT) {
> + /* Set ITU 709 as default for HDMI */
> + frame.avi.colorimetry = DRM_MODE_COLORIMETRY_ITU_709;
Default should map to NONE.
> + } else if (conn_state->colorspace < DRM_MODE_COLORIMETRY_XV_YCC_601) {
> + frame.avi.colorimetry = conn_state->colorspace;
> + } else {
> + frame.avi.colorimetry = HDMI_COLORIMETRY_EXTENDED;
> + /*
> + * Starting from extended list where COLORIMETRY_XV_YCC_601
> + * is the first extended mode and its value is 0 as per HDMI
> + * specification.
> + * TODO: This needs to be extended for LSPCON implementation
> + * as well. Will be implemented separately.
> + */
> + frame.avi.extended_colorimetry = conn_state->colorspace -
> + DRM_MODE_COLORIMETRY_XV_YCC_601;
> + }
This code seems like something that should be in the core.
Like said earlier maybe we could just directly map the
values to these bits, and then this should just become
if.colorimetry = val & 0x3;
if.extended_colorimetry = (val >> 2) & 0x7;
if.ace = (val >> 5) & 0xf;
Hmm, looks like hdmi.h doesn't even know about the ACE bits yet :(
> +
> drm_hdmi_avi_infoframe_quant_range(&frame.avi,
> conn_state->connector,
> adjusted_mode,
> @@ -2143,10 +2161,17 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
> intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
> {
> struct drm_i915_private *dev_priv = to_i915(connector->dev);
> + struct intel_digital_port *intel_dig_port =
> + hdmi_to_dig_port(intel_hdmi);
>
> intel_attach_force_audio_property(connector);
> intel_attach_broadcast_rgb_property(connector);
> intel_attach_aspect_ratio_property(connector);
> +
> + /* Attach Colorspace property for Non LSPCON based device */
> + if (!intel_dig_port->lspcon.active)
> + intel_attach_colorspace_property(connector);
> +
> drm_connector_attach_content_type_property(connector);
> connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
>
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-02-01 19:01 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-30 12:54 [v10 0/3] Add Colorspace connector property interface Uma Shankar
2019-01-30 12:52 ` ✗ Fi.CI.CHECKPATCH: warning for Add Colorspace connector property interface (rev10) Patchwork
2019-01-30 12:54 ` [v10 1/3] drm: Add HDMI colorspace property Uma Shankar
2019-02-01 18:50 ` Ville Syrjälä
2019-02-04 15:25 ` Ville Syrjälä
2019-02-04 17:08 ` [Intel-gfx] " Shankar, Uma
2019-02-04 17:24 ` Ville Syrjälä
2019-02-04 18:16 ` Shankar, Uma
2019-01-30 12:54 ` [v10 2/3] drm: Add DP " Uma Shankar
2019-02-01 19:17 ` Ville Syrjälä
2019-02-04 17:12 ` Shankar, Uma
2019-01-30 12:54 ` [v10 3/3] drm/i915: Attach colorspace property and enable modeset Uma Shankar
2019-02-01 19:01 ` Ville Syrjälä [this message]
2019-02-04 17:18 ` Shankar, Uma
2019-02-05 15:28 ` Shankar, Uma
2019-01-30 13:10 ` ✓ Fi.CI.BAT: success for Add Colorspace connector property interface (rev10) Patchwork
2019-01-30 16:00 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201190112.GC20097@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=maarten.lankhorst@intel.com \
--cc=uma.shankar@intel.com \
--cc=ville.syrjala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox