Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Subject: [PATCH 2/4] drm/i915: Remove unused VLV/CHV PSR registers
Date: Fri,  5 Apr 2019 17:51:10 -0700	[thread overview]
Message-ID: <20190406005112.27205-2-jose.souza@intel.com> (raw)
In-Reply-To: <20190406005112.27205-1-jose.souza@intel.com>

PSR support for VLV and CHV was dropped in commit ce3508fd2a77
("drm/i915/psr: Nuke PSR support for VLV and CHV") so no need to keep
this registers around.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 36 ---------------------------------
 1 file changed, 36 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c18caa76f27c..9c206e803ab3 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4209,42 +4209,6 @@ enum {
 #define PIPESRC(trans)		_MMIO_TRANS2(trans, _PIPEASRC)
 #define PIPE_MULT(trans)	_MMIO_TRANS2(trans, _PIPE_MULT_A)
 
-/* VLV eDP PSR registers */
-#define _PSRCTLA				(VLV_DISPLAY_BASE + 0x60090)
-#define _PSRCTLB				(VLV_DISPLAY_BASE + 0x61090)
-#define  VLV_EDP_PSR_ENABLE			(1 << 0)
-#define  VLV_EDP_PSR_RESET			(1 << 1)
-#define  VLV_EDP_PSR_MODE_MASK			(7 << 2)
-#define  VLV_EDP_PSR_MODE_HW_TIMER		(1 << 3)
-#define  VLV_EDP_PSR_MODE_SW_TIMER		(1 << 2)
-#define  VLV_EDP_PSR_SINGLE_FRAME_UPDATE	(1 << 7)
-#define  VLV_EDP_PSR_ACTIVE_ENTRY		(1 << 8)
-#define  VLV_EDP_PSR_SRC_TRANSMITTER_STATE	(1 << 9)
-#define  VLV_EDP_PSR_DBL_FRAME			(1 << 10)
-#define  VLV_EDP_PSR_FRAME_COUNT_MASK		(0xff << 16)
-#define  VLV_EDP_PSR_IDLE_FRAME_SHIFT		16
-#define VLV_PSRCTL(pipe)	_MMIO_PIPE(pipe, _PSRCTLA, _PSRCTLB)
-
-#define _VSCSDPA			(VLV_DISPLAY_BASE + 0x600a0)
-#define _VSCSDPB			(VLV_DISPLAY_BASE + 0x610a0)
-#define  VLV_EDP_PSR_SDP_FREQ_MASK	(3 << 30)
-#define  VLV_EDP_PSR_SDP_FREQ_ONCE	(1 << 31)
-#define  VLV_EDP_PSR_SDP_FREQ_EVFRAME	(1 << 30)
-#define VLV_VSCSDP(pipe)	_MMIO_PIPE(pipe, _VSCSDPA, _VSCSDPB)
-
-#define _PSRSTATA			(VLV_DISPLAY_BASE + 0x60094)
-#define _PSRSTATB			(VLV_DISPLAY_BASE + 0x61094)
-#define  VLV_EDP_PSR_LAST_STATE_MASK	(7 << 3)
-#define  VLV_EDP_PSR_CURR_STATE_MASK	7
-#define  VLV_EDP_PSR_DISABLED		(0 << 0)
-#define  VLV_EDP_PSR_INACTIVE		(1 << 0)
-#define  VLV_EDP_PSR_IN_TRANS_TO_ACTIVE	(2 << 0)
-#define  VLV_EDP_PSR_ACTIVE_NORFB_UP	(3 << 0)
-#define  VLV_EDP_PSR_ACTIVE_SF_UPDATE	(4 << 0)
-#define  VLV_EDP_PSR_EXIT		(5 << 0)
-#define  VLV_EDP_PSR_IN_TRANS		(1 << 7)
-#define VLV_PSRSTAT(pipe)	_MMIO_PIPE(pipe, _PSRSTATA, _PSRSTATB)
-
 /* HSW+ eDP PSR registers */
 #define HSW_EDP_PSR_BASE	0x64800
 #define BDW_EDP_PSR_BASE	0x6f800
-- 
2.21.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-04-06  0:51 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-06  0:51 [PATCH 1/4] drm/i915/psr: Update PSR2 SU corruption workaround comment José Roberto de Souza
2019-04-06  0:51 ` José Roberto de Souza [this message]
2019-04-06  0:51 ` [PATCH 3/4] drm/i915/psr: Initialize PSR mutex even when sink is not reliable José Roberto de Souza
2019-04-06  0:51 ` [PATCH 4/4] drm/i915/psr: Do not enable PSR in interlaced mode for all GENs José Roberto de Souza
2019-04-06  2:13 ` ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915/psr: Update PSR2 SU corruption workaround comment Patchwork
2019-04-07  2:45 ` ✓ Fi.CI.IGT: " Patchwork
2019-04-08 18:00   ` Souza, Jose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190406005112.27205-2-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=dhinakaran.pandiyan@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox