From: Ramalingam C <ramalingam.c@intel.com>
To: "Winkler, Tomas" <tomas.winkler@intel.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>,
dri-devel <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v6 2/3] misc/mei_hdcp: Adding the transcoder detail in payload input
Date: Tue, 20 Aug 2019 15:50:10 +0530 [thread overview]
Message-ID: <20190820102010.GB7668@intel.com> (raw)
In-Reply-To: <5B8DA87D05A7694D9FA63FD143655C1B9DC9FFDC@hasmsx108.ger.corp.intel.com>
On 2019-08-20 at 14:15:47 +0530, Winkler, Tomas wrote:
>
> >
> > ME FW takes the transcoder details for Gen12+ platforms, as HDCP HW block is
> > moved to transcoders.
> >
> > hdcp_port_data is extended with enum transcoder. Payload structure is
> > modified and populated from the hdcp_port_data.
> >
> > Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
> > ---
> > drivers/misc/mei/hdcp/mei_hdcp.c | 27 +++++++++++++++++++++++++++
> > drivers/misc/mei/hdcp/mei_hdcp.h | 15 ++++++++++++++-
> > include/drm/i915_mei_hdcp_interface.h | 2 ++
> > 3 files changed, 43 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
> > b/drivers/misc/mei/hdcp/mei_hdcp.c
> > index c681f6fab342..7efe3b65a986 100644
> > --- a/drivers/misc/mei/hdcp/mei_hdcp.c
> > +++ b/drivers/misc/mei/hdcp/mei_hdcp.c
> > @@ -39,6 +39,22 @@ static inline u8 mei_get_ddi_index(enum port port)
> > }
> > }
> >
> > +static inline u8 mei_get_tc_type(enum transcoder tc) {
> > + switch (tc) {
> > + case TRANSCODER_A ... TRANSCODER_D:
> > + return (u8)(tc | 0x10);
> > + case TRANSCODER_EDP:
> > + return TC_EDP;
> > + case TRANSCODER_DSI_0:
> > + return TC_DSI0;
> > + case TRANSCODER_DSI_1:
> > + return TC_DSI1;
> > + default:
> > + return MEI_INVALID_TRANSCODER;
> > + }
> > +}
> > +
> > /**
> > * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW
> > * @dev: device corresponding to the mei_cl_device @@ -70,6 +86,7 @@
> > mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,
> >
> > session_init_in.port.integrated_port_type = data->port_type;
> > session_init_in.port.physical_port = mei_get_ddi_index(data->port);
> > + session_init_in.port.attached_transcoder = mei_get_tc_type(data->tc);
> > session_init_in.protocol = data->protocol;
> >
> > byte = mei_cldev_send(cldev, (u8 *)&session_init_in, @@ -139,6
> > +156,7 @@ mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,
> >
> > verify_rxcert_in.port.integrated_port_type = data->port_type;
> > verify_rxcert_in.port.physical_port = mei_get_ddi_index(data->port);
> > + verify_rxcert_in.port.attached_transcoder = mei_get_tc_type(data-
> > >tc);
> >
> > verify_rxcert_in.cert_rx = rx_cert->cert_rx;
> > memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN);
> > @@ -209,6 +227,7 @@ mei_hdcp_verify_hprime(struct device *dev, struct
> > hdcp_port_data *data,
> >
> > send_hprime_in.port.integrated_port_type = data->port_type;
> > send_hprime_in.port.physical_port = mei_get_ddi_index(data->port);
> > + send_hprime_in.port.attached_transcoder = mei_get_tc_type(data-
> > >tc);
> >
> > memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
> > HDCP_2_2_H_PRIME_LEN);
> > @@ -266,6 +285,7 @@ mei_hdcp_store_pairing_info(struct device *dev, struct
> > hdcp_port_data *data,
> >
> > pairing_info_in.port.integrated_port_type = data->port_type;
> > pairing_info_in.port.physical_port = mei_get_ddi_index(data->port);
> > + pairing_info_in.port.attached_transcoder = mei_get_tc_type(data->tc);
> >
> > memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
> > HDCP_2_2_E_KH_KM_LEN);
> > @@ -324,6 +344,7 @@ mei_hdcp_initiate_locality_check(struct device *dev,
> >
> > lc_init_in.port.integrated_port_type = data->port_type;
> > lc_init_in.port.physical_port = mei_get_ddi_index(data->port);
> > + lc_init_in.port.attached_transcoder = mei_get_tc_type(data->tc);
> >
> > byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
> > if (byte < 0) {
> > @@ -379,6 +400,7 @@ mei_hdcp_verify_lprime(struct device *dev, struct
> > hdcp_port_data *data,
> >
> > verify_lprime_in.port.integrated_port_type = data->port_type;
> > verify_lprime_in.port.physical_port = mei_get_ddi_index(data->port);
> > + verify_lprime_in.port.attached_transcoder = mei_get_tc_type(data-
> > >tc);
> >
> > memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
> > HDCP_2_2_L_PRIME_LEN);
> > @@ -436,6 +458,7 @@ static int mei_hdcp_get_session_key(struct device
> > *dev,
> >
> > get_skey_in.port.integrated_port_type = data->port_type;
> > get_skey_in.port.physical_port = mei_get_ddi_index(data->port);
> > + get_skey_in.port.attached_transcoder = mei_get_tc_type(data->tc);
> >
> > byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
> > if (byte < 0) {
> > @@ -500,6 +523,7 @@ mei_hdcp_repeater_check_flow_prepare_ack(struct
> > device *dev,
> >
> > verify_repeater_in.port.integrated_port_type = data->port_type;
> > verify_repeater_in.port.physical_port = mei_get_ddi_index(data-
> > >port);
> > + verify_repeater_in.port.attached_transcoder =
> > +mei_get_tc_type(data->tc);
> >
> > memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
> > HDCP_2_2_RXINFO_LEN);
> > @@ -570,6 +594,7 @@ static int mei_hdcp_verify_mprime(struct device *dev,
> >
> > verify_mprime_in.port.integrated_port_type = data->port_type;
> > verify_mprime_in.port.physical_port = mei_get_ddi_index(data->port);
> > + verify_mprime_in.port.attached_transcoder = mei_get_tc_type(data-
> > >tc);
> >
> > memcpy(verify_mprime_in.m_prime, stream_ready->m_prime,
> > HDCP_2_2_MPRIME_LEN);
> > @@ -631,6 +656,7 @@ static int mei_hdcp_enable_authentication(struct
> > device *dev,
> >
> > enable_auth_in.port.integrated_port_type = data->port_type;
> > enable_auth_in.port.physical_port = mei_get_ddi_index(data->port);
> > + enable_auth_in.port.attached_transcoder = mei_get_tc_type(data->tc);
> > enable_auth_in.stream_type = data->streams[0].stream_type;
> >
> > byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in, @@ -685,6
> > +711,7 @@ mei_hdcp_close_session(struct device *dev, struct hdcp_port_data
> > *data)
> >
> > session_close_in.port.integrated_port_type = data->port_type;
> > session_close_in.port.physical_port = mei_get_ddi_index(data->port);
> > + session_close_in.port.attached_transcoder = mei_get_tc_type(data-
> > >tc);
> >
> > byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
> > sizeof(session_close_in));
> > diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h
> > b/drivers/misc/mei/hdcp/mei_hdcp.h
> > index e4b1cd54c853..89e2f99ff60a 100644
> > --- a/drivers/misc/mei/hdcp/mei_hdcp.h
> > +++ b/drivers/misc/mei/hdcp/mei_hdcp.h
> > @@ -184,8 +184,10 @@ struct hdcp_cmd_no_data {
> > /* Uniquely identifies the hdcp port being addressed for a given command. */
> > struct hdcp_port_id {
> > u8 integrated_port_type;
> > + /* Used until Gen11.5. Must be zero for Gen11.5+ */
> > u8 physical_port;
> > - u16 reserved;
> > + u8 attached_transcoder;
> > + u8 reserved;
> > } __packed;
> >
> > /*
> > @@ -374,4 +376,15 @@ enum mei_fw_ddi {
> > MEI_DDI_A = 7,
> > MEI_DDI_RANGE_END = MEI_DDI_A,
> > };
> > +
> > +enum mei_fw_tc {
> > + MEI_INVALID_TRANSCODER = 0x00, // Invalid transcoder type
> > + TC_EDP, // Transcoder for eDP
> > + TC_DSI0, // Transcoder for DSI0
> > + TC_DSI1, // Transcoder for DSI1
> > + TC_A = 0x10, // Transcoder TCA
> > + TC_B, // Transcoder TCB
> > + TC_C, // Transcoder TCC
> > + TC_D // Transcoder TCD
> > +};
>
> Don't use // for comments
> Ned MEI_ prefix
I will fix this.
-Ram
>
> > #endif /* __MEI_HDCP_H__ */
> > diff --git a/include/drm/i915_mei_hdcp_interface.h
> > b/include/drm/i915_mei_hdcp_interface.h
> > index 8c344255146a..dc0de63ce0cb 100644
> > --- a/include/drm/i915_mei_hdcp_interface.h
> > +++ b/include/drm/i915_mei_hdcp_interface.h
> > @@ -45,6 +45,7 @@ enum hdcp_wired_protocol {
> > /**
> > * struct hdcp_port_data - intel specific HDCP port data
> > * @port: port index as per I915
> > + * @tc: transcoder index as per I915
> > * @port_type: HDCP port type as per ME FW classification
> > * @protocol: HDCP adaptation as per ME FW
> > * @k: No of streams transmitted on a port. Only on DP MST this is != 1 @@ -
> > 57,6 +58,7 @@ enum hdcp_wired_protocol {
> > */
> > struct hdcp_port_data {
> > enum port port;
> > + enum transcoder tc;
> > u8 port_type;
> > u8 protocol;
> > u16 k;
> > --
> > 2.20.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-08-20 10:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-20 7:30 [PATCH v6 0/3] drm/i915: Enable HDCP 1.4 and 2.2 on Gen12+ Ramalingam C
2019-08-20 7:30 ` [PATCH v6 1/3] drm/i915: enum transcoder and pipe are moved into i915_drm.h Ramalingam C
2019-08-20 8:44 ` Winkler, Tomas
2019-08-20 9:03 ` Ramalingam C
2019-08-20 12:30 ` Jani Nikula
2019-08-20 12:48 ` Ramalingam C
2019-08-20 7:30 ` [PATCH v6 2/3] misc/mei_hdcp: Adding the transcoder detail in payload input Ramalingam C
2019-08-20 8:45 ` Winkler, Tomas
2019-08-20 10:20 ` Ramalingam C [this message]
2019-08-20 7:30 ` [PATCH v6 3/3] drm/i915: Enable HDCP 1.4 and 2.2 on Gen12+ Ramalingam C
2019-08-20 10:02 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Enable HDCP 1.4 and 2.2 on Gen12+ (rev4) Patchwork
2019-08-20 12:04 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-20 17:35 ` ✓ Fi.CI.IGT: " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2019-08-19 15:24 [PATCH v6 0/3] drm/i915: Enable HDCP 1.4 and 2.2 on Gen12+ Ramalingam C
2019-08-19 15:24 ` [PATCH v6 2/3] misc/mei_hdcp: Adding the transcoder detail in payload input Ramalingam C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190820102010.GB7668@intel.com \
--to=ramalingam.c@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox