public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Uma Shankar <uma.shankar@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [v1 2/6] drm/i915/display: Enable HDR on gen9 devices with MCA Lspcon
Date: Wed, 16 Oct 2019 16:14:16 +0300	[thread overview]
Message-ID: <20191016131416.GN1208@intel.com> (raw)
In-Reply-To: <20191016103249.32121-3-uma.shankar@intel.com>

On Wed, Oct 16, 2019 at 04:02:45PM +0530, Uma Shankar wrote:
> Gen9 hardware supports HDMI2.0 through LSPCON chips.
> Extending HDR support for MCA LSPCON based GEN9 devices.
> 
> SOC will drive LSPCON as DP and send HDR metadata as standard
> DP SDP packets. LSPCON will be set to operate in PCON mode,
> will receive the metadata and create Dynamic Range and
> Mastering Infoframe (DRM packets) and send it to HDR capable
> HDMI sink devices.
> 
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_hdmi.c   | 33 +++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_lspcon.c | 36 ++++++++++++++-------
>  drivers/gpu/drm/i915/display/intel_lspcon.h |  4 +++
>  3 files changed, 62 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 92d1cbbbee2b..460e10fb1782 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -576,6 +576,39 @@ static u32 hsw_infoframes_enabled(struct intel_encoder *encoder,
>  	return val & mask;
>  }
>  
> +void lspcon_drm_write_infoframe(struct intel_encoder *encoder,
> +				const struct intel_crtc_state *crtc_state,
> +				unsigned int type,
> +				const void *frame, ssize_t len)
> +{
> +	const u32 *data = frame;
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> +	i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
> +	int data_size;
> +	int i;
> +	u32 val = I915_READ(ctl_reg);
> +
> +	data_size = hsw_dip_data_size(dev_priv, type);
> +
> +	val &= ~hsw_infoframe_enable(type);
> +	I915_WRITE(ctl_reg, val);
> +
> +	for (i = 0; i < len; i += 4) {
> +		I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder,
> +					    type, i >> 2), *data);
> +		data++;
> +	}
> +	/* Write every possible data byte to force correct ECC calculation. */
> +	for (; i < data_size; i += 4)
> +		I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder,
> +					    type, i >> 2), 0);
> +
> +	val |= hsw_infoframe_enable(type);
> +	I915_WRITE(ctl_reg, val);
> +	POSTING_READ(ctl_reg);
> +}

We already have that code.

> +
>  static const u8 infoframe_type_to_idx[] = {
>  	HDMI_PACKET_TYPE_GENERAL_CONTROL,
>  	HDMI_PACKET_TYPE_GAMUT_METADATA,
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index a1d0127b7f57..51ad5f02e700 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -460,27 +460,41 @@ void lspcon_write_infoframe(struct intel_encoder *encoder,
>  			    unsigned int type,
>  			    const void *frame, ssize_t len)
>  {
> -	bool ret;
> +	bool ret = true;
>  	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
>  	struct intel_lspcon *lspcon = enc_to_intel_lspcon(&encoder->base);
>  
> -	/* LSPCON only needs AVI IF */
> -	if (type != HDMI_INFOFRAME_TYPE_AVI)
> +	if (!(type == HDMI_INFOFRAME_TYPE_AVI ||
> +	      type == HDMI_PACKET_TYPE_GAMUT_METADATA))
>  		return;
>  
> -	if (lspcon->vendor == LSPCON_VENDOR_MCA)
> -		ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
> -						      frame, len);
> -	else
> -		ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux,
> -							 frame, len);
> +	/*
> +	 * Supporting HDR on MCA LSPCON
> +	 * Todo: Add support for Parade later
> +	 */
> +	if (type == HDMI_PACKET_TYPE_GAMUT_METADATA &&
> +	    lspcon->vendor != LSPCON_VENDOR_MCA)
> +		return;
> +
> +	if (lspcon->vendor == LSPCON_VENDOR_MCA) {
> +		if (type == HDMI_INFOFRAME_TYPE_AVI)
> +			ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
> +							      frame, len);
> +		else if (type == HDMI_PACKET_TYPE_GAMUT_METADATA)
> +			lspcon_drm_write_infoframe(encoder, crtc_state,
> +						   HDMI_PACKET_TYPE_GAMUT_METADATA,
> +						   frame, VIDEO_DIP_DATA_SIZE);
> +	} else {
> +		ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux, frame,
> +							 len);
> +	}
>  
>  	if (!ret) {
> -		DRM_ERROR("Failed to write AVI infoframes\n");
> +		DRM_ERROR("Failed to write infoframes\n");
>  		return;
>  	}
>  
> -	DRM_DEBUG_DRIVER("AVI infoframes updated successfully\n");
> +	DRM_DEBUG_DRIVER("Infoframes updated successfully\n");
>  }
>  
>  void lspcon_read_infoframe(struct intel_encoder *encoder,
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h b/drivers/gpu/drm/i915/display/intel_lspcon.h
> index 37cfddf8a9c5..65878904f672 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.h
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
> @@ -35,4 +35,8 @@ u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
>  void lspcon_ycbcr420_config(struct drm_connector *connector,
>  			    struct intel_crtc_state *crtc_state);
>  
> +void lspcon_drm_write_infoframe(struct intel_encoder *encoder,
> +				const struct intel_crtc_state *crtc_state,
> +				unsigned int type,
> +				const void *frame, ssize_t len);
>  #endif /* __INTEL_LSPCON_H__ */
> -- 
> 2.22.0

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-10-16 13:14 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-16 10:32 [v1 0/6] Enable HDR on MCA LSPCON based Gen9 devices Uma Shankar
2019-10-16 10:32 ` [v1 1/6] drm/i915/display: Add HDR Capability detection for LSPCON Uma Shankar
2019-10-16 10:32 ` [v1 2/6] drm/i915/display: Enable HDR on gen9 devices with MCA Lspcon Uma Shankar
2019-10-16 13:14   ` Ville Syrjälä [this message]
2019-10-16 14:16     ` Shankar, Uma
2019-10-16 10:32 ` [v1 3/6] drm/i915/display: Attach HDR property for capable Gen9 devices Uma Shankar
2019-10-16 10:32 ` [v1 4/6] drm/i915/display: Set HDR Infoframe for HDR capable LSPCON devices Uma Shankar
2019-10-16 10:32 ` [v1 5/6] drm/i915/display: Enable BT2020 for HDR on " Uma Shankar
2019-10-16 10:32 ` [v1 6/6] drm/i915/display: Reduce blanking to support 4k60@10bpp for LSPCON Uma Shankar
2019-10-16 13:13   ` Ville Syrjälä
2019-10-16 13:46     ` Shankar, Uma
2019-10-16 13:56       ` Ville Syrjälä
2019-10-16 14:13         ` Shankar, Uma
2019-10-16 12:31 ` ✗ Fi.CI.BUILD: failure for Enable HDR on MCA LSPCON based Gen9 devices Patchwork
2019-10-16 13:17 ` [v1 0/6] " Ville Syrjälä
2019-10-16 14:21   ` Shankar, Uma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191016131416.GN1208@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=uma.shankar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox