From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [CI v12 6/6] drm/i915/display/icl: In port sync mode disable slaves first then master
Date: Fri, 18 Oct 2019 16:13:04 -0700 [thread overview]
Message-ID: <20191018231304.GF13211@intel.com> (raw)
In-Reply-To: <20191018172725.1338-6-manasi.d.navare@intel.com>
Pushed to dinq, thanks for reviews
manasi
On Fri, Oct 18, 2019 at 10:27:25AM -0700, Manasi Navare wrote:
> In the transcoder port sync mode, the slave transcoders mask their vblanks
> until master transcoder's vblank so while disabling them, make
> sure slaves are disabled first and then the masters.
>
> v5:
> * Dont pass dev priv to get_slave_crtc (Ville)
> v4:
> * Obtain slave state from master (Maarten)
> v3:
> * Rebase
> v2:
> * Use the intel_old_crtc_state_disables() helper
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 58 ++++++++++++++++++--
> 1 file changed, 52 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 22f5b213b80b..b57c9806b585 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14130,6 +14130,37 @@ static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
> new_crtc_state);
> }
>
> +static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state *state,
> + struct intel_crtc *crtc,
> + struct intel_crtc_state *old_crtc_state,
> + struct intel_crtc_state *new_crtc_state)
> +{
> + struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
> + struct intel_crtc_state *new_slave_crtc_state =
> + intel_atomic_get_new_crtc_state(state, slave_crtc);
> + struct intel_crtc_state *old_slave_crtc_state =
> + intel_atomic_get_old_crtc_state(state, slave_crtc);
> +
> + WARN_ON(!slave_crtc || !new_slave_crtc_state ||
> + !old_slave_crtc_state);
> +
> + /* Disable Slave first */
> + intel_pre_plane_update(old_slave_crtc_state, new_slave_crtc_state);
> + if (old_slave_crtc_state->base.active)
> + intel_old_crtc_state_disables(state,
> + old_slave_crtc_state,
> + new_slave_crtc_state,
> + slave_crtc);
> +
> + /* Disable Master */
> + intel_pre_plane_update(old_crtc_state, new_crtc_state);
> + if (old_crtc_state->base.active)
> + intel_old_crtc_state_disables(state,
> + old_crtc_state,
> + new_crtc_state,
> + crtc);
> +}
> +
> static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> {
> struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> @@ -14148,13 +14179,28 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> if (!needs_modeset(new_crtc_state))
> continue;
>
> - intel_pre_plane_update(old_crtc_state, new_crtc_state);
> + /* In case of Transcoder port Sync master slave CRTCs can be
> + * assigned in any order and we need to make sure that
> + * slave CRTCs are disabled first and then master CRTC since
> + * Slave vblanks are masked till Master Vblanks.
> + */
> + if (is_trans_port_sync_mode(new_crtc_state)) {
> + if (is_trans_port_sync_master(new_crtc_state))
> + intel_trans_port_sync_modeset_disables(state,
> + crtc,
> + old_crtc_state,
> + new_crtc_state);
> + else
> + continue;
> + } else {
> + intel_pre_plane_update(old_crtc_state, new_crtc_state);
>
> - if (old_crtc_state->base.active)
> - intel_old_crtc_state_disables(state,
> - old_crtc_state,
> - new_crtc_state,
> - crtc);
> + if (old_crtc_state->base.active)
> + intel_old_crtc_state_disables(state,
> + old_crtc_state,
> + new_crtc_state,
> + crtc);
> + }
> }
> }
>
> --
> 2.19.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-10-18 23:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 17:27 [CI v12 1/6] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync Manasi Navare
2019-10-18 17:27 ` [CI v12 2/6] drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports Manasi Navare
2019-10-18 23:11 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 3/6] drm/i915/display/icl: HW state readout for transcoder port sync config Manasi Navare
2019-10-18 23:11 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 4/6] drm/i915/display/icl: Enable master-slaves in trans port sync Manasi Navare
2019-10-18 23:12 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 5/6] drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence Manasi Navare
2019-10-18 23:12 ` Manasi Navare
2019-10-18 17:27 ` [CI v12 6/6] drm/i915/display/icl: In port sync mode disable slaves first then master Manasi Navare
2019-10-18 23:13 ` Manasi Navare [this message]
2019-10-18 18:47 ` ✓ Fi.CI.BAT: success for series starting with [CI,v12,1/6] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync Patchwork
2019-10-18 21:41 ` ✓ Fi.CI.IGT: " Patchwork
2019-10-18 23:10 ` [CI v12 1/6] " Manasi Navare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191018231304.GF13211@intel.com \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox