From: Shashank Sharma <shashank.sharma@intel.com>
To: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Subject: [PATCH 1/3] drm: Introduce scaling filter mode property
Date: Tue, 22 Oct 2019 15:29:44 +0530 [thread overview]
Message-ID: <20191022095946.29354-2-shashank.sharma@intel.com> (raw)
In-Reply-To: <20191022095946.29354-1-shashank.sharma@intel.com>
This patch adds a scaling filter mode porperty
to allow:
- A driver/HW to showcase it's scaling filter capabilities.
- A userspace to pick a desired effect while scaling.
This option will be particularly useful in the scenarios where
Integer mode scaling is possible, and a UI client wants to pick
filters like Nearest-neighbor applied for non-blurry outputs.
There was a RFC patch series published, to discus the request to enable
Integer mode scaling by some of the gaming communities, which can be
found here:
https://patchwork.freedesktop.org/series/66175/
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++
include/drm/drm_crtc.h | 26 ++++++++++++++++++++++++++
include/drm/drm_mode_config.h | 6 ++++++
3 files changed, 36 insertions(+)
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 0d466d3b0809..883329453a86 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -435,6 +435,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
return ret;
} else if (property == config->prop_vrr_enabled) {
state->vrr_enabled = val;
+ } else if (property == config->scaling_filter_property) {
+ state->scaling_filter = val;
} else if (property == config->degamma_lut_property) {
ret = drm_atomic_replace_property_blob_from_id(dev,
&state->degamma_lut,
@@ -503,6 +505,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
else if (property == config->prop_out_fence_ptr)
*val = 0;
+ else if (property == config->scaling_filter_property)
+ *val = state->scaling_filter;
else if (crtc->funcs->atomic_get_property)
return crtc->funcs->atomic_get_property(crtc, state, property, val);
else
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 5e9b15a0e8c5..94c5509474a8 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -58,6 +58,25 @@ struct device_node;
struct dma_fence;
struct edid;
+enum drm_scaling_filters {
+ DRM_SCALING_FILTER_DEFAULT,
+ DRM_SCALING_FILTER_MEDIUM,
+ DRM_SCALING_FILTER_BILINEAR,
+ DRM_SCALING_FILTER_NN,
+ DRM_SCALING_FILTER_NN_IS_ONLY,
+ DRM_SCALING_FILTER_EDGE_ENHANCE,
+ DRM_SCALING_FILTER_INVALID,
+};
+
+static const struct drm_prop_enum_list drm_scaling_filter_enum_list[] = {
+ { DRM_SCALING_FILTER_DEFAULT, "Default" },
+ { DRM_SCALING_FILTER_MEDIUM, "Medium" },
+ { DRM_SCALING_FILTER_BILINEAR, "Bilinear" },
+ { DRM_SCALING_FILTER_NN, "Nearest Neighbor" },
+ { DRM_SCALING_FILTER_NN_IS_ONLY, "Integer Mode Scaling" },
+ { DRM_SCALING_FILTER_INVALID, "Invalid" },
+};
+
static inline int64_t U642I64(uint64_t val)
{
return (int64_t)*((int64_t *)&val);
@@ -283,6 +302,13 @@ struct drm_crtc_state {
*/
u32 target_vblank;
+ /**
+ * @scaling_filter:
+ *
+ * Scaling filter mode to be applied
+ */
+ u32 scaling_filter;
+
/**
* @async_flip:
*
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 3bcbe30339f0..efd6fd55770f 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -914,6 +914,12 @@ struct drm_mode_config {
*/
struct drm_property *modifiers_property;
+ /**
+ * @scaling_filter_property: CRTC property to apply a particular filter
+ * while scaling in panel fitter mode.
+ */
+ struct drm_property *scaling_filter_property;
+
/* cursor size */
uint32_t cursor_width, cursor_height;
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-10-22 9:59 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-22 9:59 [PATCH 0/3] Add scaling filters in DRM layer Shashank Sharma
2019-10-22 9:59 ` Shashank Sharma [this message]
2019-10-22 10:08 ` [Intel-gfx] [PATCH 1/3] drm: Introduce scaling filter mode property Daniel Vetter
2019-10-22 10:12 ` Sharma, Shashank
2019-10-22 12:25 ` Ville Syrjälä
2019-10-23 12:44 ` Jani Nikula
2019-10-23 12:44 ` [Intel-gfx] " Jani Nikula
2019-10-24 12:06 ` Daniel Vetter
2019-10-24 12:06 ` Daniel Vetter
2019-10-24 12:12 ` Jani Nikula
2019-10-24 12:12 ` Jani Nikula
2019-10-24 12:14 ` Daniel Vetter
2019-10-24 12:14 ` Daniel Vetter
2019-10-24 12:23 ` Jani Nikula
2019-10-24 12:23 ` [Intel-gfx] " Jani Nikula
2019-10-22 12:20 ` Ville Syrjälä
2019-10-22 14:06 ` Harry Wentland
2019-10-22 15:28 ` Sharma, Shashank
2019-10-22 15:42 ` Ville Syrjälä
2019-10-22 15:18 ` Sharma, Shashank
2019-10-23 7:34 ` Pekka Paalanen
2019-10-23 12:41 ` Ville Syrjälä
2019-10-23 12:41 ` [Intel-gfx] " Ville Syrjälä
2019-10-22 12:26 ` Ville Syrjälä
2019-10-22 15:21 ` Sharma, Shashank
2019-10-22 15:38 ` Ville Syrjälä
2019-10-22 13:26 ` Mihail Atanassov
2019-10-22 13:32 ` Mihail Atanassov
2019-10-22 15:25 ` Sharma, Shashank
2019-10-22 9:59 ` [PATCH 2/3] drm/i915: Add support for scaling filters Shashank Sharma
2019-10-22 9:59 ` [PATCH 3/3] drm/i915: Handle nearest-neighbor scaling filter Shashank Sharma
2019-10-22 13:18 ` ✗ Fi.CI.CHECKPATCH: warning for Add scaling filters in DRM layer Patchwork
2019-10-22 13:21 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-10-22 13:50 ` ✓ Fi.CI.BAT: success " Patchwork
2019-10-22 23:06 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191022095946.29354-2-shashank.sharma@intel.com \
--to=shashank.sharma@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox