Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Anshuman Gupta <anshuman.gupta@intel.com>
To: intel-gfx@lists.freedesktop.org, jani.nikula@intel.com,
	daniel.vetter@intel.com, ramalingam.c@intel.com
Subject: Re: [Intel-gfx] [PATCH v2] drm/i915/hdcp: Update CP as per the kernel internal state
Date: Mon, 18 May 2020 13:37:36 +0530	[thread overview]
Message-ID: <20200518080736.GN10565@intel.com> (raw)
In-Reply-To: <20200515061029.5008-1-anshuman.gupta@intel.com>

On 2020-05-15 at 11:40:29 +0530, Anshuman Gupta wrote:
> Content Protection property should be updated as per the kernel
> internal state. Let's say if Content protection is disabled
> by userspace, CP property should be set to UNDESIRED so that
> reauthentication will not happen until userspace request it again,
> but when kernel disables the HDCP due to any DDI disabling sequences
> like modeset/DPMS operation, kernel should set the property to
> DESIRED, so that when opportunity arises, kernel will start the
> HDCP authentication on its own.
> 
> Somewhere in the line, state machine to set content protection to
> DESIRED from kernel was broken and IGT coverage was missing for it.
> This patch fixes it.
> 
> v2:
> - Fixing hdcp CP state in intel_hdcp_atomic_check(), that will
>   require to check hdcp->value in intel_hdcp_update_pipe() in order
>   to avoid enabling hdcp, if it was already enabled.
> 
> Cc: Ramalingam C <ramalingam.c@intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
> Link: https://patchwork.freedesktop.org/patch/350962/?series=72664&rev=2 #v1
> Link: https://patchwork.freedesktop.org/patch/359396/?series=72251&rev=3 #v2
Ram, Daniel, Jani,
Above patch fixes HDCP uapi broken state.
Could you please provide your inputs , is it ok to merges this patch in current form.
Thanks,
Anshuman Gupta.

> ---
>  drivers/gpu/drm/i915/display/intel_hdcp.c | 27 +++++++++++++++++++----
>  1 file changed, 23 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
> index 2cbc4619b4ce..f90f48819838 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> @@ -2083,6 +2083,7 @@ void intel_hdcp_update_pipe(struct intel_atomic_state *state,
>  		(conn_state->hdcp_content_type != hdcp->content_type &&
>  		 conn_state->content_protection !=
>  		 DRM_MODE_CONTENT_PROTECTION_UNDESIRED);
> +	bool desired_and_not_enabled = false;
>  
>  	/*
>  	 * During the HDCP encryption session if Type change is requested,
> @@ -2105,8 +2106,15 @@ void intel_hdcp_update_pipe(struct intel_atomic_state *state,
>  	}
>  
>  	if (conn_state->content_protection ==
> -	    DRM_MODE_CONTENT_PROTECTION_DESIRED ||
> -	    content_protection_type_changed)
> +	    DRM_MODE_CONTENT_PROTECTION_DESIRED) {
> +		mutex_lock(&hdcp->mutex);
> +		/* Avoid enabling hdcp, if it already ENABLED */
> +		desired_and_not_enabled =
> +			hdcp->value != DRM_MODE_CONTENT_PROTECTION_ENABLED;
> +		mutex_unlock(&hdcp->mutex);
> +	}
> +
> +	if (desired_and_not_enabled || content_protection_type_changed)
>  		intel_hdcp_enable(connector,
>  				  crtc_state->cpu_transcoder,
>  				  (u8)conn_state->hdcp_content_type);
> @@ -2155,6 +2163,19 @@ void intel_hdcp_atomic_check(struct drm_connector *connector,
>  		return;
>  	}
>  
> +	crtc_state = drm_atomic_get_new_crtc_state(new_state->state,
> +						   new_state->crtc);
> +	/*
> +	 * Fix the HDCP uapi content protection state in case of modeset.
> +	 * FIXME: As per HDCP content protection property uapi doc, an uevent()
> +	 * need to be sent if there is transition from ENABLED->DESIRED.
> +	 */
> +	if (drm_atomic_crtc_needs_modeset(crtc_state) &&
> +	    (old_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED &&
> +	    new_cp != DRM_MODE_CONTENT_PROTECTION_UNDESIRED))
> +		new_state->content_protection =
> +			DRM_MODE_CONTENT_PROTECTION_DESIRED;
> +
>  	/*
>  	 * Nothing to do if the state didn't change, or HDCP was activated since
>  	 * the last commit. And also no change in hdcp content type.
> @@ -2167,8 +2188,6 @@ void intel_hdcp_atomic_check(struct drm_connector *connector,
>  			return;
>  	}
>  
> -	crtc_state = drm_atomic_get_new_crtc_state(new_state->state,
> -						   new_state->crtc);
>  	crtc_state->mode_changed = true;
>  }
>  
> -- 
> 2.26.0
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-05-18  8:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15  6:10 [Intel-gfx] [PATCH v2] drm/i915/hdcp: Update CP as per the kernel internal state Anshuman Gupta
2020-05-15  6:56 ` Chris Wilson
2020-05-15  7:10   ` Anshuman Gupta
2020-05-15  7:46     ` Chris Wilson
2020-05-15 19:11 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/hdcp: Update CP as per the kernel internal state (rev4) Patchwork
2020-05-15 23:07 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-05-18  8:07 ` Anshuman Gupta [this message]
  -- strict thread matches above, loose matches on Subject: below --
2020-03-27 16:29 [Intel-gfx] [PATCH v2] drm/i915/hdcp: Update CP as per the kernel internal state Anshuman Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200518080736.GN10565@intel.com \
    --to=anshuman.gupta@intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=ramalingam.c@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox