Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH CI 1/2] drm/i915/tgl: Set subplatforms
Date: Fri,  7 Aug 2020 12:26:28 -0700	[thread overview]
Message-ID: <20200807192629.64134-1-jose.souza@intel.com> (raw)

There is no way to differentiate TGL-U from TGL-Y by the PCI ids as
some ids are available in both SKUs.
So here using the root device id in the PCI bus that iGPU is in
to differentiate between U and Y.

BSpec: 44455
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h          |  6 ++++++
 drivers/gpu/drm/i915/i915_reg.h          |  6 ++++++
 drivers/gpu/drm/i915/intel_device_info.c | 19 +++++++++++++++++++
 3 files changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 05a2624116a1..bacb4c762f5b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1487,6 +1487,12 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_ICL_WITH_PORT_F(dev_priv) \
 	IS_SUBPLATFORM(dev_priv, INTEL_ICELAKE, INTEL_SUBPLATFORM_PORTF)
 
+#define IS_TGL_U(dev_priv) \
+	IS_SUBPLATFORM(dev_priv, INTEL_TIGERLAKE, INTEL_SUBPLATFORM_ULT)
+
+#define IS_TGL_Y(dev_priv) \
+	IS_SUBPLATFORM(dev_priv, INTEL_TIGERLAKE, INTEL_SUBPLATFORM_ULX)
+
 #define SKL_REVID_A0		0x0
 #define SKL_REVID_B0		0x1
 #define SKL_REVID_C0		0x2
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e85c6fc1f3cb..14d8c3fbcc0d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -12353,4 +12353,10 @@ enum skl_power_gate {
 #define   DSB_ENABLE			(1 << 31)
 #define   DSB_STATUS			(1 << 0)
 
+#define TGL_ROOT_DEVICE_ID		0x9A00
+#define TGL_ROOT_DEVICE_MASK		0xFF00
+#define TGL_ROOT_DEVICE_SKU_MASK	0xF
+#define TGL_ROOT_DEVICE_SKU_ULX		0x2
+#define TGL_ROOT_DEVICE_SKU_ULT		0x4
+
 #endif /* _I915_REG_H_ */
diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
index 40c590db3c76..e2aa5bc3a6e0 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -346,6 +346,25 @@ void intel_device_info_subplatform_init(struct drm_i915_private *i915)
 		mask = BIT(INTEL_SUBPLATFORM_PORTF);
 	}
 
+	if (IS_TIGERLAKE(i915)) {
+		struct pci_dev *root, *pdev = i915->drm.pdev;
+
+		root = list_first_entry(&pdev->bus->devices, typeof(*root), bus_list);
+
+		drm_WARN_ON(&i915->drm, mask);
+		drm_WARN_ON(&i915->drm, (root->device & TGL_ROOT_DEVICE_MASK) !=
+			    TGL_ROOT_DEVICE_ID);
+
+		switch (root->device & TGL_ROOT_DEVICE_SKU_MASK) {
+		case TGL_ROOT_DEVICE_SKU_ULX:
+			mask = BIT(INTEL_SUBPLATFORM_ULX);
+			break;
+		case TGL_ROOT_DEVICE_SKU_ULT:
+			mask = BIT(INTEL_SUBPLATFORM_ULT);
+			break;
+		}
+	}
+
 	GEM_BUG_ON(mask & ~INTEL_SUBPLATFORM_BITS);
 
 	RUNTIME_INFO(i915)->platform_mask[pi] |= mask;
-- 
2.28.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2020-08-07 19:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-07 19:26 José Roberto de Souza [this message]
2020-08-07 19:26 ` [Intel-gfx] [PATCH CI 2/2] drm/i915/tgl: Add new voltage swing table José Roberto de Souza
2020-08-07 19:49 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [CI,1/2] drm/i915/tgl: Set subplatforms Patchwork
2020-08-07 20:10 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-08-08  2:15 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-08-10 17:33   ` Souza, Jose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200807192629.64134-1-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox