Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lyude Paul <lyude@redhat.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>,
	open list <linux-kernel@vger.kernel.org>,
	Vasily Khoruzhick <anarsoul@gmail.com>,
	Sean Paul <seanpaul@chromium.org>,
	Wambui Karuga <wambui.karugax@gmail.com>
Subject: [Intel-gfx] [RFC 1/5] drm/i915/dp: Program source OUI on eDP panels
Date: Tue, 15 Sep 2020 13:29:35 -0400	[thread overview]
Message-ID: <20200915172939.2810538-2-lyude@redhat.com> (raw)
In-Reply-To: <20200915172939.2810538-1-lyude@redhat.com>

Since we're about to start adding support for Intel's magic HDR
backlight interface over DPCD, we need to ensure we're properly
programming this field so that Intel specific sink services are exposed.
Otherwise, 0x300-0x3ff will just read zeroes.

We also take care not to reprogram the source OUI if it already matches
what we expect. This is just to be careful so that we don't accidentally
take the panel out of any backlight control modes we found it in.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 32 +++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 4bd10456ad188..b591672ec4eab 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3428,6 +3428,7 @@ void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
 void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 {
 	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	u8 edp_oui[] = { 0x00, 0xaa, 0x01 };
 	int ret, i;
 
 	/* Should have a valid DPCD by this point */
@@ -3443,6 +3444,14 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 	} else {
 		struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
 
+		/* Write the source OUI as early as possible */
+		if (intel_dp_is_edp(intel_dp)) {
+			ret = drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, edp_oui,
+						sizeof(edp_oui));
+			if (ret < 0)
+				drm_err(&i915->drm, "Failed to write eDP source OUI\n");
+		}
+
 		/*
 		 * When turning on, we need to retry for 1ms to give the sink
 		 * time to wake up.
@@ -4530,6 +4539,23 @@ static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp)
 	}
 }
 
+static void
+intel_edp_init_source_oui(struct intel_dp *intel_dp)
+{
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	u8 oui[] = { 0x00, 0xaa, 0x01 };
+	u8 buf[3] = { 0 };
+
+	if (drm_dp_dpcd_read(&intel_dp->aux, DP_SOURCE_OUI, buf, sizeof(buf)) < 0)
+		drm_err(&i915->drm, "Failed to read source OUI\n");
+
+	if (memcmp(oui, buf, sizeof(oui)) == 0)
+		return;
+
+	if (drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, oui, sizeof(oui)) < 0)
+		drm_err(&i915->drm, "Failed to write source OUI\n");
+}
+
 static bool
 intel_edp_init_dpcd(struct intel_dp *intel_dp)
 {
@@ -4607,6 +4633,12 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
 	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
 		intel_dp_get_dsc_sink_cap(intel_dp);
 
+	/*
+	 * Program our source OUI so we can make various Intel-specific AUX
+	 * services available (such as HDR backlight controls)
+	 */
+	intel_edp_init_source_oui(intel_dp);
+
 	return true;
 }
 
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-09-15 17:30 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-15 17:29 [Intel-gfx] [RFC 0/5] drm/i915: Add support for Intel's eDP backlight controls Lyude Paul
2020-09-15 17:29 ` Lyude Paul [this message]
2020-09-15 19:06   ` [Intel-gfx] [RFC 1/5] drm/i915/dp: Program source OUI on eDP panels Rodrigo Vivi
2020-09-15 19:47     ` Lyude Paul
2020-09-15 22:38       ` Navare, Manasi
2020-09-16  0:05         ` Lyude Paul
2020-09-16  7:43     ` Jani Nikula
2020-09-16 15:32       ` Lyude Paul
2020-09-15 17:29 ` [Intel-gfx] [RFC 2/5] drm/i915: Rename pwm_* backlight callbacks to ext_pwm_* Lyude Paul
2020-09-15 19:08   ` Rodrigo Vivi
2020-09-15 17:29 ` [Intel-gfx] [RFC 3/5] drm/i915: Keep track of pwm-related backlight hooks separately Lyude Paul
2020-09-15 17:29 ` [Intel-gfx] [RFC 4/5] drm/i915: Enable Intel's HDR backlight interface (only SDR for now) Lyude Paul
2020-09-15 19:21   ` Rodrigo Vivi
2020-09-15 17:29 ` [Intel-gfx] [RFC 5/5] drm/dp: Revert "drm/dp: Introduce EDID-based quirks" Lyude Paul
2020-09-16  7:00   ` Jani Nikula
2020-09-15 17:37 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Add support for Intel's eDP backlight controls Patchwork
2020-09-15 18:01 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-09-15 21:58 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200915172939.2810538-2-lyude@redhat.com \
    --to=lyude@redhat.com \
    --cc=airlied@linux.ie \
    --cc=anarsoul@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=seanpaul@chromium.org \
    --cc=wambui.karugax@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox