From: Anshuman Gupta <anshuman.gupta@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: seanpaul@chromium.org
Subject: [Intel-gfx] [PATCH v2 4/4] drm/i915/hdcp: Enable Gen12 HDCP 1.4 DP MST support
Date: Wed, 23 Sep 2020 16:35:27 +0530 [thread overview]
Message-ID: <20200923110527.28661-5-anshuman.gupta@intel.com> (raw)
In-Reply-To: <20200923110527.28661-1-anshuman.gupta@intel.com>
Enable HDCP 1.4 over DP MST for Gen12.
This also enable the stream encryption support for
older generations, which was missing earlier.
v2:
- Added debug print for stream encryption.
- Disable the hdcp on port after disabling last stream
encryption.
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp_mst.c | 10 ++---
drivers/gpu/drm/i915/display/intel_hdcp.c | 46 ++++++++++++++-------
2 files changed, 35 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 79060b2aefcd..9223d57ef3e3 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -813,13 +813,9 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
-
- /* TODO: Figure out how to make HDCP work on GEN12+ */
- if (INTEL_GEN(dev_priv) < 12) {
- ret = intel_dp_init_hdcp(dig_port, intel_connector);
- if (ret)
- DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
- }
+ ret = intel_dp_init_hdcp(dig_port, intel_connector);
+ if (ret)
+ drm_dbg_kms(&dev_priv->drm, "HDCP init failed, skipping.\n");
/*
* Reuse the prop from the SST connector because we're
diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
index f401fdaa7336..744cefc0c35d 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
@@ -612,7 +612,12 @@ int intel_hdcp_auth_downstream(struct intel_connector *connector)
return ret;
}
-/* Implements Part 1 of the HDCP authorization procedure */
+/*
+ * Implements Part 1 of the HDCP authorization procedure.
+ * Authentication Part 1 steps for Multi-stream DisplayPort.
+ * Step 1. Auth Part 1 sequence on the driving MST Trasport Link.
+ * Step 2. Enable encryption for each stream that requires encryption.
+ */
static int intel_hdcp_auth(struct intel_connector *connector)
{
struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
@@ -766,10 +771,16 @@ static int intel_hdcp_auth(struct intel_connector *connector)
return -ETIMEDOUT;
}
- /*
- * XXX: If we have MST-connected devices, we need to enable encryption
- * on those as well.
- */
+ /* DP MST Auth Part 1 Step 2.a and Step 2.b */
+ if (shim->stream_encryption) {
+ ret = shim->stream_encryption(dig_port, true);
+ if (ret) {
+ drm_err(&dev_priv->drm, "Failed to enable HDCP 1.4 stream enc\n");
+ return ret;
+ }
+ drm_dbg_kms(&dev_priv->drm, "HDCP 1.4 tras %s stream encrypted\n",
+ transcoder_name(hdcp->stream_transcoder));
+ }
if (repeater_present)
return intel_hdcp_auth_downstream(connector);
@@ -790,19 +801,26 @@ static int _intel_hdcp_disable(struct intel_connector *connector)
drm_dbg_kms(&dev_priv->drm, "[%s:%d] HDCP is being disabled...\n",
connector->base.name, connector->base.base.id);
+ /*
+ * Step 1: Deselect HDCP Multiplestream Bit.
+ * Step 2: poll for stream encryption status to be disable.
+ */
+ if (hdcp->shim->stream_encryption) {
+ ret = hdcp->shim->stream_encryption(dig_port, false);
+ if (ret) {
+ drm_err(&dev_priv->drm, "Failed to disable HDCP 1.4 stream enc\n");
+ return ret;
+ }
+ drm_dbg_kms(&dev_priv->drm, "HDCP 1.4 trans %s stream encryption disabled\n",
+ transcoder_name(hdcp->stream_transcoder));
+ }
/*
- * If there are other connectors on this port using HDCP, don't disable
- * it. Instead, toggle the HDCP signalling off on that particular
- * connector/pipe and exit.
+ * If there are other connectors on this port using HDCP, don't disable it.
+ * Repeat steps 1-2 for each stream that no longer requires encryption.
*/
- if (dig_port->num_hdcp_streams > 0) {
- ret = hdcp->shim->toggle_signalling(dig_port,
- cpu_transcoder, false);
- if (ret)
- DRM_ERROR("Failed to disable HDCP signalling\n");
+ if (dig_port->num_hdcp_streams > 0)
return ret;
- }
hdcp->hdcp_encrypted = false;
intel_de_write(dev_priv, HDCP_CONF(dev_priv, cpu_transcoder, port), 0);
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-09-23 11:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-23 11:05 [Intel-gfx] [PATCH v2 0/4] Gen12 HDCP 1.4 support on DP MST Anshuman Gupta
2020-09-23 11:05 ` [Intel-gfx] [PATCH v2 1/4] drm/i915/hdcp: DP MST transcoder for link and stream Anshuman Gupta
2020-09-23 11:05 ` [Intel-gfx] [PATCH v2 2/4] drm/i915/hdcp: Move HDCP enc status timeout to header Anshuman Gupta
2020-09-23 11:05 ` [Intel-gfx] [PATCH v2 3/4] drm/i915/hdcp: HDCP stream encryption support Anshuman Gupta
2020-09-23 11:05 ` Anshuman Gupta [this message]
2020-09-23 11:32 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Gen12 HDCP 1.4 support on DP MST (rev2) Patchwork
2020-09-23 11:33 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-09-23 11:57 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-09-23 15:20 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200923110527.28661-5-anshuman.gupta@intel.com \
--to=anshuman.gupta@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=seanpaul@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox