[Intel-gfx] [PATCH i-g-t v2] i915/perf_pmu: Fix perf fd leak

[Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

As it turns out opening the perf fd in group mode still produces separate
file descriptors for all members of the group, which in turn need to be
closed manually to avoid leaking them.

v2:
 * Fix array sizing unload.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 tests/i915/perf_pmu.c | 130 +++++++++++++++++++++++++-----------------
 1 file changed, 78 insertions(+), 52 deletions(-)

diff --git a/tests/i915/perf_pmu.c b/tests/i915/perf_pmu.c
index 873b275dca6b..b2402955092e 100644
--- a/tests/i915/perf_pmu.c
+++ b/tests/i915/perf_pmu.c
@@ -475,7 +475,8 @@ busy_check_all(int gem_fd, const struct intel_execution_engine2 *e,
 
 	end_spin(gem_fd, spin, FLAG_SYNC);
 	igt_spin_free(gem_fd, spin);
-	close(fd[0]);
+	for (i = 0; i < num_engines; i++)
+		close(fd[i]);
 
 	for (i = 0; i < num_engines; i++)
 		val[i] = tval[1][i] - tval[0][i];
@@ -546,7 +547,8 @@ most_busy_check_all(int gem_fd, const struct intel_execution_engine2 *e,
 
 	end_spin(gem_fd, spin, FLAG_SYNC);
 	igt_spin_free(gem_fd, spin);
-	close(fd[0]);
+	for (i = 0; i < num_engines; i++)
+		close(fd[i]);
 
 	for (i = 0; i < num_engines; i++)
 		val[i] = tval[1][i] - tval[0][i];
@@ -600,7 +602,8 @@ all_busy_check_all(int gem_fd, const unsigned int num_engines,
 
 	end_spin(gem_fd, spin, FLAG_SYNC);
 	igt_spin_free(gem_fd, spin);
-	close(fd[0]);
+	for (i = 0; i < num_engines; i++)
+		close(fd[i]);
 
 	for (i = 0; i < num_engines; i++)
 		val[i] = tval[1][i] - tval[0][i];
@@ -617,22 +620,23 @@ no_sema(int gem_fd, const struct intel_execution_engine2 *e, unsigned int flags)
 {
 	igt_spin_t *spin;
 	uint64_t val[2][2];
-	int fd;
+	int fd[2];
 
-	fd = open_group(gem_fd,
-			I915_PMU_ENGINE_SEMA(e->class, e->instance), -1);
-	open_group(gem_fd, I915_PMU_ENGINE_WAIT(e->class, e->instance), fd);
+	fd[0] = open_group(gem_fd, I915_PMU_ENGINE_SEMA(e->class, e->instance),
+			   -1);
+	fd[1] = open_group(gem_fd, I915_PMU_ENGINE_WAIT(e->class, e->instance),
+			   fd[0]);
 
 	if (flags & TEST_BUSY)
 		spin = spin_sync(gem_fd, 0, e);
 	else
 		spin = NULL;
 
-	pmu_read_multi(fd, 2, val[0]);
+	pmu_read_multi(fd[0], 2, val[0]);
 	measured_usleep(batch_duration_ns / 1000);
 	if (flags & TEST_TRAILING_IDLE)
 		end_spin(gem_fd, spin, flags);
-	pmu_read_multi(fd, 2, val[1]);
+	pmu_read_multi(fd[0], 2, val[1]);
 
 	val[0][0] = val[1][0] - val[0][0];
 	val[0][1] = val[1][1] - val[0][1];
@@ -641,7 +645,8 @@ no_sema(int gem_fd, const struct intel_execution_engine2 *e, unsigned int flags)
 		end_spin(gem_fd, spin, FLAG_SYNC);
 		igt_spin_free(gem_fd, spin);
 	}
-	close(fd);
+	close(fd[0]);
+	close(fd[1]);
 
 	assert_within_epsilon(val[0][0], 0.0f, tolerance);
 	assert_within_epsilon(val[0][1], 0.0f, tolerance);
@@ -861,18 +866,21 @@ sema_busy(int gem_fd,
 	  const struct intel_execution_engine2 *e,
 	  unsigned int flags)
 {
-	int fd;
+	int fd[2];
 
 	igt_require(intel_gen(intel_get_drm_devid(gem_fd)) >= 8);
 
-	fd = open_group(gem_fd, I915_PMU_ENGINE_SEMA(e->class, e->instance), -1);
-	open_group(gem_fd, I915_PMU_ENGINE_BUSY(e->class, e->instance), fd);
+	fd[0] = open_group(gem_fd, I915_PMU_ENGINE_SEMA(e->class, e->instance),
+			   -1);
+	fd[1] = open_group(gem_fd, I915_PMU_ENGINE_BUSY(e->class, e->instance),
+			   fd[0]);
 
-	__sema_busy(gem_fd, fd, e, 50, 100);
-	__sema_busy(gem_fd, fd, e, 25, 50);
-	__sema_busy(gem_fd, fd, e, 75, 75);
+	__sema_busy(gem_fd, fd[0], e, 50, 100);
+	__sema_busy(gem_fd, fd[0], e, 25, 50);
+	__sema_busy(gem_fd, fd[0], e, 75, 75);
 
-	close(fd);
+	close(fd[0]);
+	close(fd[1]);
 }
 
 #define   MI_WAIT_FOR_PIPE_C_VBLANK (1<<21)
@@ -1441,7 +1449,7 @@ test_frequency(int gem_fd)
 	uint64_t val[2], start[2], slept;
 	double min[2], max[2];
 	igt_spin_t *spin;
-	int fd, sysfs;
+	int fd[2], sysfs;
 
 	sysfs = igt_sysfs_open(gem_fd);
 	igt_require(sysfs >= 0);
@@ -1455,8 +1463,8 @@ test_frequency(int gem_fd)
 	igt_require(max_freq > min_freq);
 	igt_require(boost_freq > min_freq);
 
-	fd = open_group(gem_fd, I915_PMU_REQUESTED_FREQUENCY, -1);
-	open_group(gem_fd, I915_PMU_ACTUAL_FREQUENCY, fd);
+	fd[0] = open_group(gem_fd, I915_PMU_REQUESTED_FREQUENCY, -1);
+	fd[1] = open_group(gem_fd, I915_PMU_ACTUAL_FREQUENCY, fd[0]);
 
 	/*
 	 * Set GPU to min frequency and read PMU counters.
@@ -1471,9 +1479,9 @@ test_frequency(int gem_fd)
 	gem_quiescent_gpu(gem_fd); /* Idle to be sure the change takes effect */
 	spin = spin_sync_flags(gem_fd, 0, I915_EXEC_DEFAULT);
 
-	slept = pmu_read_multi(fd, 2, start);
+	slept = pmu_read_multi(fd[0], 2, start);
 	measured_usleep(batch_duration_ns / 1000);
-	slept = pmu_read_multi(fd, 2, val) - slept;
+	slept = pmu_read_multi(fd[0], 2, val) - slept;
 
 	min[0] = 1e9*(val[0] - start[0]) / slept;
 	min[1] = 1e9*(val[1] - start[1]) / slept;
@@ -1497,9 +1505,9 @@ test_frequency(int gem_fd)
 	gem_quiescent_gpu(gem_fd);
 	spin = spin_sync_flags(gem_fd, 0, I915_EXEC_DEFAULT);
 
-	slept = pmu_read_multi(fd, 2, start);
+	slept = pmu_read_multi(fd[0], 2, start);
 	measured_usleep(batch_duration_ns / 1000);
-	slept = pmu_read_multi(fd, 2, val) - slept;
+	slept = pmu_read_multi(fd[0], 2, val) - slept;
 
 	max[0] = 1e9*(val[0] - start[0]) / slept;
 	max[1] = 1e9*(val[1] - start[1]) / slept;
@@ -1514,7 +1522,8 @@ test_frequency(int gem_fd)
 	if (igt_sysfs_get_u32(sysfs, "gt_min_freq_mhz") != min_freq)
 		igt_warn("Unable to restore min frequency to saved value [%u MHz], now %u MHz\n",
 			 min_freq, igt_sysfs_get_u32(sysfs, "gt_min_freq_mhz"));
-	close(fd);
+	close(fd[0]);
+	close(fd[1]);
 
 	igt_info("Min frequency: requested %.1f, actual %.1f\n",
 		 min[0], min[1]);
@@ -1535,7 +1544,7 @@ test_frequency_idle(int gem_fd)
 	uint32_t min_freq;
 	uint64_t val[2], start[2], slept;
 	double idle[2];
-	int fd, sysfs;
+	int fd[2], sysfs;
 
 	sysfs = igt_sysfs_open(gem_fd);
 	igt_require(sysfs >= 0);
@@ -1545,17 +1554,18 @@ test_frequency_idle(int gem_fd)
 
 	/* While parked, our convention is to report the GPU at 0Hz */
 
-	fd = open_group(gem_fd, I915_PMU_REQUESTED_FREQUENCY, -1);
-	open_group(gem_fd, I915_PMU_ACTUAL_FREQUENCY, fd);
+	fd[0] = open_group(gem_fd, I915_PMU_REQUESTED_FREQUENCY, -1);
+	fd[1] = open_group(gem_fd, I915_PMU_ACTUAL_FREQUENCY, fd[0]);
 
 	gem_quiescent_gpu(gem_fd); /* Be idle! */
 	measured_usleep(2000); /* Wait for timers to cease */
 
-	slept = pmu_read_multi(fd, 2, start);
+	slept = pmu_read_multi(fd[0], 2, start);
 	measured_usleep(batch_duration_ns / 1000);
-	slept = pmu_read_multi(fd, 2, val) - slept;
+	slept = pmu_read_multi(fd[0], 2, val) - slept;
 
-	close(fd);
+	close(fd[0]);
+	close(fd[1]);
 
 	idle[0] = 1e9*(val[0] - start[0]) / slept;
 	idle[1] = 1e9*(val[1] - start[1]) / slept;
@@ -1926,57 +1936,73 @@ static int unload_i915(void)
 	return 0;
 }
 
-static void test_unload(void)
+static void test_unload(unsigned int num_engines)
 {
 	igt_fork(child, 1) {
 		const struct intel_execution_engine2 *e;
+		int fd[4 + num_engines * 3], i;
 		uint64_t *buf;
-		int count = 1;
+		int count = 0;
 		int i915;
-		int fd;
 
 		i915 = __drm_open_driver(DRIVER_INTEL);
 
 		igt_debug("Opening perf events\n");
-		fd = open_group(i915, I915_PMU_INTERRUPTS, -1);
+		fd[count] = open_group(i915, I915_PMU_INTERRUPTS, -1);
+		if (fd[count] != -1)
+			count++;
 
-		if (perf_i915_open_group(i915, I915_PMU_REQUESTED_FREQUENCY,fd) != -1)
+		fd[count] = perf_i915_open_group(i915,
+						 I915_PMU_REQUESTED_FREQUENCY,
+						 fd[count - 1]);
+		if (fd[count] != -1)
 			count++;
-		if (perf_i915_open_group(i915, I915_PMU_ACTUAL_FREQUENCY, fd) != -1)
+
+		fd[count] = perf_i915_open_group(i915,
+						 I915_PMU_ACTUAL_FREQUENCY,
+						 fd[count - 1]);
+		if (fd[count] != -1)
 			count++;
 
 		__for_each_physical_engine(i915, e) {
-			if (perf_i915_open_group(i915,
-						 I915_PMU_ENGINE_BUSY(e->class, e->instance),
-						 fd) != -1)
+			fd[count] = perf_i915_open_group(i915,
+							 I915_PMU_ENGINE_BUSY(e->class, e->instance),
+							 fd[count - 1]);
+			if (fd[count] != -1)
 				count++;
 
-			if (perf_i915_open_group(i915,
-						 I915_PMU_ENGINE_SEMA(e->class, e->instance),
-						 fd) != -1)
+			fd[count] = perf_i915_open_group(i915,
+							 I915_PMU_ENGINE_SEMA(e->class, e->instance),
+							 fd[count - 1]);
+			if (fd[count] != -1)
 				count++;
 
-			if (perf_i915_open_group(i915,
-						 I915_PMU_ENGINE_WAIT(e->class, e->instance),
-						 fd) != -1)
+			fd[count] = perf_i915_open_group(i915,
+							 I915_PMU_ENGINE_WAIT(e->class, e->instance),
+							 fd[count - 1]);
+			if (fd[count] != -1)
 				count++;
 		}
 
-		if (perf_i915_open_group(i915, I915_PMU_RC6_RESIDENCY,fd) != -1)
+		fd[count] = perf_i915_open_group(i915, I915_PMU_RC6_RESIDENCY,
+						 fd[count - 1]);
+		if (fd[count] != -1)
 			count++;
 
 		close(i915);
 
-		buf = calloc(count + 1, sizeof(uint64_t));
+		buf = calloc(count, sizeof(uint64_t));
 		igt_assert(buf);
 
 		igt_debug("Read %d events from perf and trial unload\n", count);
-		pmu_read_multi(fd, count, buf);
+		pmu_read_multi(fd[0], count, buf);
 		igt_assert_eq(unload_i915(), -EBUSY);
-		pmu_read_multi(fd, count, buf);
+		pmu_read_multi(fd[0], count, buf);
 
 		igt_debug("Close perf\n");
-		close(fd);
+
+		for (i = 0; i < count; i++)
+			close(fd[i]);
 
 		free(buf);
 	}
@@ -2357,6 +2383,6 @@ igt_main
 	igt_subtest("module-unload") {
 		igt_require(unload_i915() == 0);
 		for (int pass = 0; pass < 3; pass++)
-			test_unload();
+			test_unload(num_engines);
 	}
 }
-- 
2.25.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx